Name
kernel-command-line — Kernel command line parameters
Synopsis
/proc/cmdline
Description¶
The kernel, the programs running in the initrd and in the host system may be configured at boot via kernel command line arguments.
For command line parameters understood by the kernel, please
see
kernel-parameters.html
and
bootparam(7).
For command line parameters understood by the initrd, see the documentation of the specific initrd implementation of your installation.
Core OS Command Line Arguments¶
systemd.unit=,rd.systemd.unit=,systemd.dump_core,systemd.crash_chvt,systemd.crash_shell,systemd.crash_action=,systemd.confirm_spawn,systemd.service_watchdogs,systemd.show_status,systemd.status_unit_format=,systemd.log_target=,systemd.log_level=,systemd.log_location=,systemd.log_color,systemd.log_ratelimit_kmsg,systemd.default_standard_output=,systemd.default_standard_error=,systemd.setenv=,systemd.machine_id=,systemd.set_credential=,systemd.set_credential_binary=,systemd.import_credentials=,systemd.credentials_boot_policy=,systemd.reload_limit_interval_sec=,systemd.reload_limit_burst=,systemd.minimum_uptime_sec=¶Parameters understood by the system and service manager to control system behavior. For details, see systemd(1).
systemd.restrict_filesystem_access=¶Controls the
RestrictFileSystemAccess=execution enforcement policy. For details, see systemd-system.conf(5).systemd.mask=,systemd.wants=,systemd.debug_shell,systemd.default_debug_tty=¶Additional parameters understood by systemd-debug-generator(8), to mask or start specific units at boot, or invoke a debug shell on tty9.
systemd.break=,rd.systemd.break=¶Parameters understood by systemd-debug-generator(8), to pause the boot process at a certain point and spawn a debug shell.
systemd.run=,systemd.run_success_action=,systemd.run_failure_action=¶Additional parameters understood by systemd-run-generator(8), to run a command line specified on the kernel command line as system service after booting up.
systemd.early_core_pattern=¶During early boot, the generation of core dump files is disabled until a core dump handler (if any) takes over. This parameter allows specifying an absolute path where core dump files should be stored until a handler is installed. The path should be absolute and may contain specifiers, see core(5) for details.
systemd.restore_state=¶This parameter is understood by several system tools to control whether or not they should restore system state from the previous boot. For details, see systemd-backlight@.service(8) and systemd-rfkill.service(8).
systemd.ssh_auto=,systemd.ssh_listen=¶These parameters are interpreted by systemd-ssh-generator(8) and may be used to control SSH sockets the system shall be reachable on.
systemd.volatile=¶This parameter controls whether the system shall boot up in volatile mode. Takes a boolean argument, or the special values "
state" or "overlay". If false (the default), normal boot mode is selected, the root directory and/var/are mounted as specified on the kernel command line or/etc/fstab, or otherwise configured. If true, full state-less boot mode is selected. In this case, the root directory is mounted as volatile memory file system ("tmpfs"), and only/usr/is mounted from the file system configured as root device, in read-only mode. This enables fully state-less boots where the vendor-supplied OS is used as shipped, with only default configuration and no stored state in effect, as/etc/and/var/(as well as all other resources shipped in the root file system) are reset at boot and lost on shutdown. If this setting is set to "state" the root file system is mounted read-only, however/var/is mounted as a volatile memory file system ("tmpfs"), so that the system boots up with the normal configuration applied, but all state reset at boot and lost at shutdown. If this setting is set to "overlay" the root file system is set up as "overlayfs" mount combining the read-only root directory with a writable "tmpfs", so that no modifications are made to disk, but the file system may be modified nonetheless with all changes being lost at reboot. For details, see systemd-volatile-root.service(8) and systemd-fstab-generator(8).quiet¶Parameter understood by both the kernel and the system and service manager to control console log verbosity. For details, see systemd(1).
debug¶Parameter understood by both the kernel and the system and service manager to control console log verbosity. For details, see systemd(1).
-b,rd.emergency,emergency,rd.rescue,rescue,single,s,S,1,2,3,4,5¶Parameters understood by the system and service manager, as compatibility and convenience options. For details, see systemd(1).
locale.LANG=,locale.LANGUAGE=,locale.LC_CTYPE=,locale.LC_NUMERIC=,locale.LC_TIME=,locale.LC_COLLATE=,locale.LC_MONETARY=,locale.LC_MESSAGES=,locale.LC_PAPER=,locale.LC_NAME=,locale.LC_ADDRESS=,locale.LC_TELEPHONE=,locale.LC_MEASUREMENT=,locale.LC_IDENTIFICATION=¶Parameters understood by the system and service manager to control locale and language settings. For details, see systemd(1).
fsck.mode=,fsck.repair=¶Parameters understood by the file system checker services. For details, see systemd-fsck@.service(8).
quotacheck.mode=¶Parameter understood by the file quota checker service. For details, see systemd-quotacheck@.service(8).
systemd.journald.forward_to_syslog=,systemd.journald.forward_to_kmsg=,systemd.journald.forward_to_console=,systemd.journald.forward_to_wall=¶Parameters understood by the journal service. For details, see systemd-journald.service(8).
vconsole.keymap=,vconsole.keymap_toggle=,vconsole.font=,vconsole.font_map=,vconsole.font_unimap=,vconsole.font_scale=¶Parameters understood by the virtual console setup logic. For details, see vconsole.conf(5).
vconsole.font_scale=was added in version 262.udev.log_level=,rd.udev.log_level=,udev.trace=,rd.udev.trace=,udev.children_max=,rd.udev.children_max=,udev.exec_delay=,rd.udev.exec_delay=,udev.event_timeout=,rd.udev.event_timeout=,udev.timeout_signal=,rd.udev.timeout_signal=,udev.blockdev_read_only,rd.udev.blockdev_read_only,net.ifnames=,net.naming_scheme=¶Parameters understood by the device event managing daemon. For details, see systemd-udevd.service(8).
plymouth.enable=¶May be used to disable the Plymouth boot splash. For details, see plymouth(8).
luks=,rd.luks=,luks.crypttab=,rd.luks.crypttab=,luks.name=,rd.luks.name=,luks.uuid=,rd.luks.uuid=,luks.options=,rd.luks.options=,luks.key=,rd.luks.key=¶Configures the LUKS full-disk encryption logic at boot. For details, see systemd-cryptsetup-generator(8).
fstab=,rd.fstab=¶Configures the
/etc/fstablogic at boot. For details, see systemd-fstab-generator(8).root=,rootfstype=,rootflags=,ro,rw¶Configures the root file system and its file system type and mount options, as well as whether it shall be mounted read-only or read-write initially. For details, see systemd-fstab-generator(8).
If
root=is not set (or set to "gpt-auto") the automatic root partition discovery implemented by systemd-gpt-auto-generator(8) will be in effect. In this case,rootfstype=,rootflags=,ro,rwwill be interpreted by systemd-gpt-auto-generator.mount.usr=,mount.usrfstype=,mount.usrflags=¶Configures the /usr file system (if required) and its file system type and mount options. For details, see systemd-fstab-generator(8).
veritytab=,rd.veritytab=,roothash=,systemd.verity=,rd.systemd.verity=,systemd.verity_root_data=,systemd.verity_root_hash=,systemd.verity_root_options=,usrhash=,systemd.verity_usr_data=,systemd.verity_usr_hash=,systemd.verity_usr_options=¶Configures the integrity protection root hash for the root and
/usrfile systems, and other related parameters. For details, see systemd-veritysetup-generator(8).systemd.getty_auto=¶Configures whether the
serial-getty@.servicewill run. For details, see systemd-getty-generator(8).systemd.gpt_auto=,rd.systemd.gpt_auto=¶Configures whether GPT-based partition auto-discovery shall be attempted. For details, see systemd-gpt-auto-generator(8).
systemd.image_policy=¶When GPT-based partition auto-discovery is used, configures the image dissection policy string to apply, as per systemd.image-policy(7). For details see systemd-gpt-auto-generator(8).
systemd.image_filter=¶When GPT-based partition auto-discovery is used, configures the image dissection filter string to apply, as per systemd.image-filter(7). For details see systemd-gpt-auto-generator(8).
systemd.default_timeout_start_sec=¶Overrides the default start job timeout
DefaultTimeoutStartSec=at boot. For details, see systemd-system.conf(5).systemd.default_device_timeout_sec=¶Overrides the default device timeout
DefaultDeviceTimeoutSec=at boot. For details, see systemd-system.conf(5).systemd.watchdog_device=¶Overrides the watchdog device path
WatchdogDevice=. For details, see systemd-system.conf(5).systemd.watchdog_sec=¶Overrides the watchdog timeout settings otherwise configured with
RuntimeWatchdog=,RebootWatchdog=andKExecWatchdogSec=. Takes a time value (if no unit is specified, seconds is the implicitly assumed time unit) or the special strings "off" or "default". For details, see systemd-system.conf(5).systemd.watchdog_pre_sec=¶Overrides the watchdog pre-timeout settings otherwise configured with
RuntimeWatchdogPreSec=. Takes a time value (if no unit is specified, seconds is the implicitly assumed time unit) or the special strings "off" or "default". For details, see systemd-system.conf(5).systemd.watchdog_pretimeout_governor=¶Overrides the watchdog pre-timeout settings otherwise configured with
RuntimeWatchdogPreGovernor=. Takes a string value. For details, see systemd-system.conf(5).systemd.cpu_affinity=¶Overrides the CPU affinity mask for the service manager and the default for all child processes it forks. This takes precedence over
CPUAffinity=, see systemd-system.conf(5) for details.modules_load=,rd.modules_load=¶Load a specific kernel module early at boot. For details, see systemd-modules-load.service(8).
nameserver=,domain=¶Configures DNS server information and search domains, see systemd-resolved.service(8) for details.
resume=,resumeflags=¶Enable resume from hibernation using the specified device and timeout options. All fstab(5)-style device identifiers are supported. For details, see systemd-hibernate-resume-generator(8).
resume_offset=¶Configure the page offset of the swap space from the resume device. For details, see systemd-hibernate-resume-generator(8).
systemd.firstboot=¶Takes a boolean argument or the special value "
headless", defaults to on. If off, systemd-firstboot.service(1) and systemd-homed-firstboot.service(1) will not query the user for basic system settings, even if the system boots up for the first time and the relevant settings are not initialized yet. If set to "headless", the same interactive prompts are suppressed as with "no", but non-interactive auto-configuration that requires no user input is still performed (for example, selecting the only installed locale, or applying settings provided via credentials). This is useful for unattended installations that should be provisioned as far as possible without ever blocking on a prompt. Not to be confused withsystemd.condition_first_boot=(see below), which overrides the result of theConditionFirstBoot=unit file condition, and thus controls more than justsystemd-firstboot.servicebehaviour.systemd.condition_needs_update=¶Takes a boolean argument. If specified, overrides the result of
ConditionNeedsUpdate=unit condition checks. See systemd.unit(5) for details.systemd.condition_first_boot=¶Takes a boolean argument. If specified, overrides the result of
ConditionFirstBoot=unit condition checks. See systemd.unit(5) for details. Not to be confused withsystemd.firstboot=which only controls behaviour of thesystemd-firstboot.servicesystem service but has no effect on the condition check (see above).systemd.clock_usec=¶Takes a decimal, numeric timestamp in μs since January 1st 1970, 00:00am, to set the system clock to. The system time is set to the specified timestamp early during boot. It is not propagated to the hardware clock (RTC).
systemd.random_seed=¶Takes a base64 encoded random seed value to credit with full entropy to the kernel's random pool during early service manager initialization. This option is useful in testing environments where delays due to random pool initialization in entropy starved virtual machines shall be avoided.
Note that if this option is used the seed is accessible to unprivileged programs from
/proc/cmdline. This option is hence a security risk when used outside of test systems, since the (possibly) only seed used for initialization of the kernel's entropy pool might be easily acquired by unprivileged programs.It is recommended to pass 512 bytes of randomized data (as that matches the Linux kernel pool size), which may be generated with a command like the following:
dd if=/dev/urandom bs=512 count=1 status=none | base64 -w 0
Again: do not use this option outside of testing environments, it is a security risk elsewhere, as secret key material derived from the entropy pool can possibly be reconstructed by unprivileged programs.
systemd.allow_userspace_verity=¶Takes a boolean argument. Controls whether disk images that are Verity protected may be authenticated in userspace signature checks via
/etc/verity.d/*.crt(and related directories) public key drop-ins, or whether in-kernel signature checking only. Defaults to on.systemd.hostname=¶Accepts a hostname to set during early boot. If specified takes precedence over what is set in
/etc/hostname. Note that this does not bar later runtime changes to the hostname, it simply controls the initial hostname set during early boot.The name may use the "
?" and "$" wildcard patterns documented in hostname(5), which are expanded deterministically from the machine ID each time the name is applied. The expanded name is never persisted, hence it may change if the word lists change. Note that in the initrd the word lists (and possibly the machine ID) are typically not available; the option is then ignored and the hostname is instead determined from the other sources, i.e./etc/hostnameor thesystem.hostnamecredential, falling back to the default hostname if none of those apply.systemd.tty.term.,tty=systemd.tty.rows.,tty=systemd.tty.columns.¶tty=These arguments allow configuring default values for
$TERM,TTYRows=, andTTYColumns=for ttytty. Additionally,systemd.tty.term.consolewill configure the$TERMvalue used by systemd if not set explicitly usingTERMon the kernel command line. The tty name should be specified without the/dev/prefix (e.g. "systemd.tty.rows.ttyS0=80").systemd.battery_check=¶Accepts a boolean argument. If false the boot-time battery charge check implemented by systemd-battery-check.service(8) is disabled.
ifname=,net.ifname_policy=¶Controls interface naming policies, implemented by systemd-network-generator.service(8).
systemd.tpm2_allow_clear=¶Controls whether to allow clearing of the TPM chip, implemented by systemd-tpm2-clear.service(8).
systemd.tpm2_wait=¶Controls whether to wait for a TPM2 device at boot, implemented by systemd-tpm2-generator(8).
systemd.tpm2_software_fallback=¶Controls whether to start a fallback software TPM service in case a hardware TPM is not available, implemented by systemd-tpm2-generator(8).
systemd.tpm2_measured_os=¶Controls whether to execute various boot and runtime TPM PCR measurements. Takes a boolean argument. If not specified explicitly this behaviour is enabled automatically in case systemd-stub(7) is used and it succeeded in doing pre-boot measurements of the booted UKI, and otherwise disabled.
systemd.factory_reset=¶Controls whether to boot into factory reset mode, implemented by systemd-factory-reset-generator(8), systemd-repart(8), and other tools.
systemd.imds=,systemd.imds.*=¶Controls various Instance Metadata Service (IMDS) cloud aspects, see systemd-imdsd@.service(8) and systemd-imds-generator(8) for details.
systemd.sysext=,systemd.confext=,rd.systemd.sysext=,rd.systemd.confext=¶Take boolean arguments, default to on. Control whether system and configuration extensions for the initrd (
rd.systemd.sysext=,rd.systemd.confext=) and for the main system (systemd.sysext=,systemd.confext=) are merged automatically on boot. See systemd-sysext(8) for details.
History¶
- systemd 252¶
Kernel command-line arguments
systemd.unified_cgroup_hierarchyandsystemd.legacy_systemd_cgroup_controllerwere deprecated. Please switch to the unified cgroup hierarchy.
See Also¶
systemd(1), systemd-system.conf(5), bootparam(7), systemd.system-credentials(7), smbios-type-11(7), systemd-debug-generator(8), systemd-fsck@.service(8), systemd-quotacheck@.service(8), systemd-journald.service(8), systemd-vconsole-setup.service(8), systemd-udevd.service(8), plymouth(8), systemd-cryptsetup-generator(8), systemd-veritysetup-generator(8), systemd-fstab-generator(8), systemd-getty-generator(8), systemd-gpt-auto-generator(8), systemd-volatile-root.service(8), systemd-modules-load.service(8), systemd-backlight@.service(8), systemd-rfkill.service(8), systemd-hibernate-resume-generator(8), systemd-firstboot.service(1), bootctl(1)