Name
systemd-tmpfiles, systemd-tmpfiles-setup.service, systemd-tmpfiles-setup-dev-early.service, systemd-tmpfiles-setup-dev.service, systemd-tmpfiles-clean.service, systemd-tmpfiles-clean.timer — Create, delete, and clean up files and directories
Synopsis
systemd-tmpfiles [OPTIONS...] [CONFIGFILE...]
System units:
systemd-tmpfiles-setup.service |
systemd-tmpfiles-setup-dev-early.service |
systemd-tmpfiles-setup-dev.service |
systemd-tmpfiles-clean.service |
systemd-tmpfiles-clean.timer |
User units:
systemd-tmpfiles-setup.service |
systemd-tmpfiles-clean.service |
systemd-tmpfiles-clean.timer |
Description¶
systemd-tmpfiles creates, deletes, and cleans up files and directories, using
the configuration file format and location specified in
tmpfiles.d(5).
Historically, it was designed to manage volatile and temporary files, as the name suggests, but it provides
generic file management functionality and can be used to manage any kind of files. It must
be invoked with one or more commands --create, --remove, and
--clean, to select the respective subset of operations.
If invoked with no arguments, directives from the configuration files found in the directories
specified by
tmpfiles.d(5) are
executed. When invoked with positional arguments, if option
--replace= is specified, arguments specified on the
command line are used instead of the configuration file PATHPATH. Otherwise, just
the configuration specified by the command line arguments is executed. If the string "-"
is specified instead of a filename, the configuration is read from standard input. If the argument is a
file name (without any slashes), all configuration directories are searched for a matching file and the
file found that has the highest priority is executed. If the argument is a path, that file is used
directly without searching the configuration directories for any other matching file.
System services (systemd-tmpfiles-setup.service,
systemd-tmpfiles-setup-dev-early.service,
systemd-tmpfiles-setup-dev.service,
systemd-tmpfiles-clean.service) invoke systemd-tmpfiles to create
system files and to perform system wide cleanup. Those services read administrator-controlled
configuration files in tmpfiles.d/ directories. User services
(systemd-tmpfiles-setup.service,
systemd-tmpfiles-clean.service) also invoke systemd-tmpfiles, but
it reads a separate set of files, which includes user-controlled files under
~/.config/user-tmpfiles.d/ and ~/.local/share/user-tmpfiles.d/,
and administrator-controlled files under /usr/share/user-tmpfiles.d/. Users may use
this to create and clean up files under their control, but the system instance performs global cleanup
and is not influenced by user configuration. Note that this means a time-based cleanup configured in the
system instance, such as the one typically configured for /tmp/, will thus also
affect files created by the user instance if they are placed in /tmp/, even if the
user instance's time-based cleanup is turned off.
To re-apply settings after configuration has been modified, simply restart
systemd-tmpfiles-clean.service, which will apply any settings which can be safely
executed at runtime. To debug systemd-tmpfiles, it may be useful to invoke it
directly from the command line with increased log level (see $SYSTEMD_LOG_LEVEL
below).
Commands and options¶
The following commands are understood:
--create¶If this command is passed, all files and directories marked with
f,F,w,d,D,v,p,L,c,b,min the configuration files are created or written to. Files and directories marked withz,Z,t,T,a, andAhave their ownership, access mode and security labels set.--clean¶If this command is passed, all files and directories with an age parameter configured will be cleaned up.
--remove¶If this command is passed, the contents of directories marked with
DorR, and files or directories themselves marked withrorRare removed unless an exclusive or shared BSD lock is taken on them (see flock(2)).--purge¶If this option is passed, all files and directories declared for creation and marked with the "
$" character by thetmpfiles.d/files specified on the command line will be deleted. Specifically, this acts on all files and directories marked withf,F,d,D,v,q,Q,p,L,c,b,C,w,e. If this switch is used at least onetmpfiles.d/file (or-for standard input) must be specified on the command line or the invocation will be refused, for safety reasons (as otherwise much of the installed system files might be removed).The primary usecase for this option is to automatically remove files and directories that originally have been created on behalf of an installed package at package removal time.
It is recommended to first run this command in combination with
--dry-run(see below) to verify which files and directories will be deleted.Warning! This is usually not the command you want! In most cases
--removeis what you are looking for.--user¶Execute "user" configuration, i.e.
tmpfiles.d/files in user configuration directories.--boot¶Also execute lines with an exclamation mark. Lines that are not safe to be executed on a running system may be marked in this way. systemd-tmpfiles is executed in early boot with
--bootspecified and will execute those lines. When invoked again later, it should be called without--boot.--graceful¶Ignore configuration lines pertaining to unknown users or groups. This option is intended to be used in early boot before all users or groups have been created.
-n,--dry-run¶Process the configuration and print what operations would be performed, but do not actually change anything in the file system. The short option
-nwas added in version 262.--inline¶Treat each positional argument as a separate configuration line instead of a file name.
--prefix=¶pathOnly apply rules with paths that start with the specified prefix. This option can be specified multiple times.
--exclude-prefix=¶pathIgnore rules with paths that start with the specified prefix. This option can be specified multiple times.
-E¶A shortcut for "
--exclude-prefix=/dev --exclude-prefix=/proc --exclude-prefix=/run --exclude-prefix=/sys", i.e. exclude the hierarchies typically backed by virtual or memory file systems. This is useful in combination with--root=, if the specified directory tree contains an OS tree without these virtual/memory file systems mounted in, as it is typically not desirable to create any files and directories below these subdirectories if they are supposed to be overmounted during runtime.--root=¶rootTakes a directory path as an argument. All paths will be prefixed with the given alternate
rootpath, including config search paths.When this option is used, the libc Name Service Switch (NSS) is bypassed for resolving users and groups. Instead the files
/etc/passwdand/etc/groupinside the alternate root are read directly. This means that users/groups not listed in these files will not be resolved, i.e. LDAP NIS and other complex databases are not considered.Consider combining this with
-Eto ensure the invocation does not create files or directories below mount points in the OS image operated on that are typically overmounted during runtime.Note that this is not a sandboxing or security feature. tmpfiles.d(5) definitions are potentially not processed in a hermetic fashion to the specified root.
--image=¶imageTakes a path to a disk image file or block device node. If specified all operations are applied to file system in the indicated disk image. This is similar to
--root=but operates on file systems stored in disk images or block devices. The disk image should either contain just a file system or a set of file systems within a GPT partition table, following the UAPI.2 Discoverable Partitions Specification. For further information on supported disk images, see systemd-nspawn(1)'s switch of the same name.Implies
-E.--image-policy=¶policyTakes an image policy string as argument, as per systemd.image-policy(7). The policy is enforced when operating on the disk image specified via
--image=, see above. If not specified, defaults to the "*" policy, i.e. all recognized file systems in the image are used.--replace=¶PATHWhen this option is given, one or more positional arguments must be specified. All configuration files found in the directories listed in tmpfiles.d(5) will be read, and the configuration given on the command line will be handled instead of and with the same priority as the configuration file
PATH.This option is intended to be used when package installation scripts are running and files belonging to that package are not yet available on disk, so their contents must be given on the command line, but the admin configuration might already exist and should be given higher priority.
--cat-config¶Copy the contents of config files to standard output. Before each file, the filename is printed as a comment.
--tldr¶Copy the contents of config files to standard output. Only the "interesting" parts of the configuration files are printed, comments and empty lines are skipped. Before each file, the filename is printed as a comment.
--no-pager¶Do not pipe output into a pager.
-h,--help¶--version¶Print a short version string and exit.
It is possible to combine --create, --clean, and --remove
in one invocation (in which case removal and cleanup are executed before creation of new files). For example,
during boot the following command line is executed to ensure that all temporary and volatile directories are
removed and created according to the configuration file:
systemd-tmpfiles --remove --create
Credentials¶
systemd-tmpfiles supports the service credentials logic as implemented by
ImportCredential=/LoadCredential=/SetCredential=
(see systemd.exec(5) for
details). The following credentials are used when passed in:
tmpfiles.extra¶The contents of this credential may contain additional lines to operate on. The credential contents should follow the same format as any other
tmpfiles.d/drop-in configuration file. If this credential is passed it is processed after all of the drop-in files read from the file system. The lines in the credential can hence augment existing lines of the OS, but not override them.
Note that by default the systemd-tmpfiles-setup.service unit file (and related
unit files) is set up to inherit the "tmpfiles.extra" credential from the service
manager.
Environment¶
$SYSTEMD_LOG_LEVEL¶The maximum log level of emitted messages (messages with a higher log level, i.e. less important ones, will be suppressed). Takes a comma-separated list of values. A value may be either one of (in order of decreasing importance)
emerg,alert,crit,err,warning,notice,info,debug, or an integer in the range 0…7. See syslog(3) for more information. Each value may optionally be prefixed with one ofconsole,syslog,kmsgorjournalfollowed by a colon to set the maximum log level for that specific log target (e.g.SYSTEMD_LOG_LEVEL=debug,console:infospecifies to log at debug level except when logging to the console which should be at info level). Note that the global maximum log level takes priority over any per target maximum log levels.$SYSTEMD_LOG_COLOR¶A boolean. If true, messages written to the tty will be colored according to priority.
This setting is only useful when messages are written directly to the terminal, because journalctl(1) and other tools that display logs will color messages based on the log level on their own.
$SYSTEMD_LOG_TIME¶A boolean. If true, console log messages will be prefixed with a timestamp.
This setting is only useful when messages are written directly to the terminal or a file, because journalctl(1) and other tools that display logs will attach timestamps based on the entry metadata on their own.
$SYSTEMD_LOG_LOCATION¶A boolean. If true, messages will be prefixed with a filename and line number in the source code where the message originates.
Note that the log location is often attached as metadata to journal entries anyway. Including it directly in the message text can nevertheless be convenient when debugging programs.
$SYSTEMD_LOG_TARGET¶The destination for log messages. One of
console(log to the attached tty),console-prefixed(log to the attached tty but with prefixes encoding the log level and "facility", see syslog(3),kmsg(log to the kernel circular log buffer),journal(log to the journal),journal-or-kmsg(log to the journal if available, and to kmsg otherwise),auto(determine the appropriate log target automatically, the default),null(disable log output).$SYSTEMD_PAGER,$PAGER¶Pager to use when
--no-pageris not given.$SYSTEMD_PAGERis used if set; otherwise$PAGERis used. If neither$SYSTEMD_PAGERnor$PAGERare set, a set of well-known pager implementations is tried in turn, including less(1) and more(1), until one is found. If no pager implementation is discovered, no pager is invoked. Setting those environment variables to an empty string or the value "cat" is equivalent to passing--no-pager.Note: if
$SYSTEMD_PAGERSECUREis not set,$SYSTEMD_PAGERand$PAGERcan only be used to disable the pager (with "cat" or ""), and are otherwise ignored.$SYSTEMD_LESS¶Override the options passed to less (by default "
FRSXMK").Users might want to change two options in particular:
K¶This option instructs the pager to exit immediately when Ctrl+C is pressed. To allow less to handle Ctrl+C itself to switch back to the pager command prompt, unset this option.
If the value of
$SYSTEMD_LESSdoes not include "K", and the pager that is invoked is less, Ctrl+C will be ignored by the executable, and needs to be handled by the pager.X¶This option instructs the pager to not send termcap initialization and deinitialization strings to the terminal. It is set by default to allow command output to remain visible in the terminal even after the pager exits. Nevertheless, this prevents some pager functionality from working, in particular paged output cannot be scrolled with the mouse.
Note that setting the regular
$LESSenvironment variable has no effect for less invocations by systemd tools.See less(1) for more discussion.
$SYSTEMD_LESSCHARSET¶Override the charset passed to less (by default "
utf-8", if the invoking terminal is determined to be UTF-8 compatible).Note that setting the regular
$LESSCHARSETenvironment variable has no effect for less invocations by systemd tools.$SYSTEMD_PAGERSECURE¶Common pager commands like less(1), in addition to "paging", i.e. scrolling through the output, support opening of or writing to other files and running arbitrary shell commands. When commands are invoked with elevated privileges, for example under sudo(8) or pkexec(1), the pager becomes a security boundary. Care must be taken that only programs with strictly limited functionality are used as pagers, and unintended interactive features like opening or creation of new files or starting of subprocesses are not allowed. "Secure mode" for the pager may be enabled as described below, if the pager supports that (most pagers are not written in a way that takes this into consideration). It is recommended to either explicitly enable "secure mode" or to completely disable the pager using
--no-pagerorPAGER=catwhen allowing untrusted users to execute commands with elevated privileges.This option takes a boolean argument. When set to true, the "secure mode" of the pager is enabled. In "secure mode",
LESSSECURE=1will be set when invoking the pager, which instructs the pager to disable commands that open or create new files or start new subprocesses. Currently only less(1) is known to understand this variable and implement "secure mode".When set to false, no limitation is placed on the pager. Setting
SYSTEMD_PAGERSECURE=0or not removing it from the inherited environment may allow the user to invoke arbitrary commands.When
$SYSTEMD_PAGERSECUREis not set, systemd tools attempt to automatically figure out if "secure mode" should be enabled and whether the pager supports it. "Secure mode" is enabled if the effective UID is not the same as the owner of the login session, see geteuid(2) and sd_pid_get_owner_uid(3), or when running under sudo(8) or similar tools ($SUDO_UIDis set [1]). In those cases,SYSTEMD_PAGERSECURE=1will be set and pagers which are not known to implement "secure mode" will not be used at all. Note that this autodetection only covers the most common mechanisms to elevate privileges and is intended as convenience. It is recommended to explicitly set$SYSTEMD_PAGERSECUREor disable the pager.Note that if the
$SYSTEMD_PAGERor$PAGERvariables are to be honoured, other than to disable the pager,$SYSTEMD_PAGERSECUREmust be set too.$SYSTEMD_COLORS¶Takes a boolean argument, or a special value. By default (unset), systemd and related utilities will use colors in their output if possible. If
$COLORTERMis set to "truecolor" or "24bit", 24-bit colors will be enabled, 256 colors otherwise, unless$NO_COLORor$TERMindicates colors are disabled.true¶Same as unset, except that
$NO_COLORis ignored.false¶The output will be monochrome.
- "
16", "256", "24bit"¶ Always use the base 16 ANSI colors, 256 colors, or 24 bit color, respectively.
- "
auto-16", "auto-256", "auto-24bit"¶ Use the given quantity of colours, subject to
$TERM, and what the console is connected to.
$SYSTEMD_URLIFY¶The value must be a boolean. Controls whether clickable links should be generated in the output for terminal emulators supporting this. This can be specified to override the decision that systemd makes based on
$TERMand other conditions.
Unprivileged --cleanup operation¶
systemd-tmpfiles tries to avoid changing
the access and modification times on the directories it accesses,
which requires CAP_FOWNER privileges. When
running as non-root, directories which are checked for files to
clean up will have their access time bumped, which might prevent
their cleanup.
Exit status¶
On success, 0 is returned. If the configuration was syntactically invalid (syntax errors, missing
arguments, …), so some lines had to be ignored, but no other errors occurred, 65 is
returned (EX_DATAERR from /usr/include/sysexits.h). If the
configuration was syntactically valid, but could not be executed (lack of permissions, creation of files
in missing directories, invalid contents when writing to /sys/ values, …),
73 is returned (EX_CANTCREAT from
/usr/include/sysexits.h). Otherwise, 1 is returned
(EXIT_FAILURE from /usr/include/stdlib.h).
Note: when creating items, if the target already exists, but is of the wrong type or otherwise does
not match the requested state, and forced operation has not been requested with "+",
a message is emitted, but the failure is otherwise ignored.
[1] It is recommended for other tools to set and check $SUDO_UID as appropriate,
treating it is a common interface.