HALF ECHO LEARN / REFERENCE COLLECTION
v262.2NEWS
Git blob: b0d42b491c5b5bbc5168dc8d19d77308851d87df
Lines 6001–7000 of 23,379
* systemd-vmspawn now supports two switches --pass-ssh-key= and
--ssh-key-type= to optionally set up transient SSH keys to pass to the
invoked VMs in order to be able to SSH into them once booted.
* systemd-vmspawn will now enable various "HyperV enlightenments" and
the "VM Generation ID" on the VMs.
* A new environment variable $SYSTEMD_VMSPAWN_QEMU_EXTRA may carry
additional qemu command line options to pass to qemu.
* systemd-machined gained a new GetMachineSSHInfo() D-Bus method that is
used by systemd-vmspawn to fetch the information needed to ssh into the
machine.
* systemd-machined gained a new Varlink interface that is used by
systemd-vmspawn to register machines with additional information and
metadata.
systemd-repart:
* systemd-repart gained new options --generate-fstab= and
--generate-crypttab= to write out fstab and crypttab files matching the
generated partitions.
* systemd-repart gained a new option --private-key-source= to allow
using OpenSSL's "engines" or "providers" as the signing mechanism to
use when creating verity signature partitions.
* systemd-repart gained a new DefaultSubvolume= setting in repart.d/
drop-ins that allow configuring the default btrfs subvolume for newly
formatted btrfs file systems.
Libraries:
* libsystemd gained new call sd_bus_creds_new_from_pidfd() to get a
credentials object for a pidfd and sd_bus_creds_get_pidfd_dup() to
retrieve the pidfd from a credentials object.
* sd-bus' credentials logic will now also acquire peer's UNIX group
lists and peer's pidfd if supported and requested.
* RPM macro %_kernel_install_dir has been added with the path
to the directory for kernel-install plugins.
* The liblz4, libzstd, liblzma, libkmod, libgcrypt dependencies have
been changed from regular shared library dependencies into dlopen()
based ones.
Note that this means that those libraries might not be automatically
pulled in when ELF dependencies are resolved. In particular lack of
libkmod might cause problems with boot. This affects dracut <= 101,
see https://github.com/dracut-ng/dracut-ng/commit/04b362d713235459cf.
* systemd ELF binaries that use libraries via dlopen() are now built with
a new ELF header note section, following a new specification defined at
docs/ELF_DLOPEN_METADATA.md, that provides information about which
sonames are loaded and used if found at runtime. This allows tools and
packagers to programmatically discover the list of optional
dependencies used by all systemd ELF binaries. A parser with packaging
integration tools is available at
https://github.com/systemd/package-notes
* The sd-journal API gained a new call
sd_journal_stream_fd_with_namespace() which is just like
sd_journal_stream_fd() but creates a log stream targeted at a
specific log namespace.
* The sd-id128 API gained a new API call
sd_id128_get_invocation_app_specific() for acquiring an app-specific
ID that is derived from the service invocation ID.
* The sd-event API gained a new API call
sd_event_source_get_inotify_path() that returns the file system path
an inotify event source was created for.
systemd-cryptsetup/systemd-cryptenroll:
* The device node argument to systemd-cryptenroll is now optional. If
omitted it will be derived automatically from the backing block
device of /var/ (which quite likely is the same as the root file
system, hence effectively means if you don't specify things otherwise
the tool will now default to enrolling a key into the root file
system's LUKS device).
* systemd-cryptenroll can now enroll directly with a PKCS11 public key
(instead of a certificate).
* systemd-cryptsetup/systemd-cryptenroll now may lock a disk against a
PKCS#11 provided EC key (before it only supported RSA).
* systemd-cryptsetup gained support for crypttab option
link-volume-key= to link the volume key into the kernel keyring when
the volume is opened.
* systemd-cryptenroll will no longer enable Dictionary Attack
Protection (i.e. turn on NO_DA) for TPM enrollments that do not
involve a PIN. DA should not be necessary in that case (since key
entropy is high enough to make this unnecessary), but risks
accidental lock-out in case of unexpected PCR changes.
* systemd-cryptenroll now supports enrolling a new slot while unlocking
the old slot via TPM2 (previously unlocking only worked via password
or FIDO2).
Documentation:
* The remaining documentation that was on
https://freedesktop.org/wiki/Software/systemd/ has been moved to
https://systemd.io/.
* A new text describing the VM integration interfaces of systemd has
been added:
https://systemd.io/VM_INTERFACE
* The sd_notify() man page has gained examples with C and Python code
that shows how to implement the interface in those languages without
involving libsystemd.
systemd-homed, systemd-logind, systemd-userdbd:
* systemd-homed now supports unlocking of home directories when logging
in via SSH. Previously home directories needed to be unlocked before
an SSH login is attempted.
* JSON User Records have been extended with a separate public storage
area called "User Record Blob Directories". This is intended to store
the user's background image, avatar picture, and other similar items
which are too large to fit into the User Record itself.
systemd-homed, userdbctl, and homectl gained support for blob
directories. homectl gained --avatar= and --login-background= to
control two specific items of the blob directories.
* A new "additionalLanguages" field has been added to JSON user records
(as supported by systemd-homed and systemd-userdbd), which is closely
related to the pre-existing "preferredLanguage", and allows
specifying multiple additional languages for the user account. It is
used to initialize the $LANGUAGES environment variable when used.
* A new pair of "preferredSessionType" and "preferredSessionLauncher"
fields have been added to JSON user records, that may be used to
control which kind of desktop session to preferable activate on
logins of the user.
* homectl gained a new verb 'firstboot', and a new
systemd-homed-firstboot.service unit uses this verb to create users
in a first boot environment, either from system credentials or by
querying interactively.
* systemd-logind now supports a new "background-light" session class
which does not pull in the user@.service unit. This is intended in
particular for lighter weight per-user cron jobs which do require any
per-user service manager to be around.
* The per-user service manager will now be tracked as a distinct "manager"
session type among logind sessions of each user.
* homectl now supports an --offline mode, by which certain account
properties can be changed without unlocking the home directory.
* systemd-logind gained a new
org.freedesktop.login1.Manager.ListSessionsEx() method that provides
additional metadata compared to ListSessions(). loginctl makes use of
this to list additional fields in list-sessions.
* systemd-logind gained a new org.freedesktop.login1.Manager.Sleep()
method that automatically redirects to SuspendThenHibernate(),
Suspend(), HybridSleep(), or Hibernate(), depending on what is
supported and configured, a new configuration setting SleepOperation=,
and an accompanying helper method
org.freedesktop.login1.Manager.CanSleep() and property
org.freedesktop.login1.Manager.SleepOperation.
'systemctl sleep' calls the new method to automatically put the
machine to sleep in the most appropriate way.
Credential Management:
* systemd-creds now provides a Varlink IPC API for encrypting and
decrypting credentials.
* systemd-creds' "tpm2-absent" key selection has been renamed to
"null", since that's what it actually does: "encrypt" and "sign"
with a fixed null key. --with-key=null should only be used in very
specific cases, as it provides zero integrity or confidentiality
protections. (i.e. it's only safe to use as fallback in environments
lacking both a TPM and access to the root fs to use the host
encryption key, or when integrity is provided some other way.)
* systemd-creds gained a new switch --allow-null. If specified, the
"decrypt" verb will decode encrypted credentials that use the "null"
key (by default this is refused, since using the "null" key defeats
the authenticated encryption normally done).
Suspend & Hibernate:
* The sleep.conf configuration file gained a new MemorySleepMode=
setting for configuring the sleep mode in more detail.
* A tiny new service systemd-hibernate-clear.service has been added
which clears hibernation information from the HibernateLocation EFI
variable, in case the resume device is gone. Normally, this variable
is supposed to be cleaned up by the code that initiates the resume
from hibernation image. But when the device is missing and that code
doesn't run, this service will now do the necessary work, ensuring
that no outdated hibernation image information remains on subsequent
boots.
Unprivileged User Namespaces & Mounts:
* A small new service systemd-nsresourced.service has been added. It
provides a Varlink IPC API that assigns a free, transiently allocated
64K UID/GID range to an uninitialized user namespace a client
provides. It may be used to implement unprivileged container managers
and other programs that need dynamic user ID ranges. It also provides
interfaces to then delegate mount file descriptors, control groups
and network interfaces to user namespaces set up this way.
* A small new service systemd-mountfsd.service has been added. It
provides a Varlink IPC API for mounting DDI images, and returning a set
of mount file descriptors for it. If a user namespace fd is provided
as input, then the mounts are registered with the user namespace. To
ensure trust in the image it must provide Verity information (or
alternatively interactive polkit authentication is required).
* The systemd-dissect tool now can access DDIs fully unprivileged by
using systemd-nsresourced/systemd-mountfsd.
* If the service manager runs unprivileged (i.e. systemd --user) it now
supports RootImage= for accessing DDI images, also implemented via
the systemd-nsresourced/systemd-mountfsd.
* systemd-nspawn may now operate without privileges, if a suitable DDI
is provided via --image=, again implemented via
systemd-nsresourced/systemd-mountfsd.
Other:
* timedatectl and machinectl gained option '-P', an alias for
'--value --property=…'.
* Various tools that pretty-print config files will now highlight
configuration directives.
* varlinkctl gained support for the "ssh:" transport. This requires
OpenSSH 9.4 or newer.
* systemd-sysext gained support for enabling system extensions in
mutable fashion, where a writable upperdir is stored under
/var/lib/extensions.mutable/, and a new --mutable= option to
configure this behaviour. An "ephemeral" mode is now also supported
where the mutable layer is configured to be a tmpfs that is
automatically released when the system extensions are reattached.
* Coredumps are now retained for two weeks by default (instead of three
days, as before).
* portablectl --copy= parameter gained a new 'mixed' argument, that will
result in resources owned by the OS (e.g.: portable profiles) to be linked
but resources owned by the portable image (e.g.: the unit files and the
images themselves) to be copied.
* systemd will now register MIME types for various of its file types
(e.g. journal files, DDIs, encrypted credentials …) via the XDG
shared-mime-info infrastructure. (Files of these types will thus be
recognized as their own thing in desktop file managers such as GNOME
Files.)
* systemd-dissect will now show the detected sector size of a given DDI
in its default output.
* systemd-portabled now generates recognizable structured log messages
whenever a portable service is attached or detached.
* Verity signature checking in userspace (i.e. checking against
/etc/verity.d/ keys) when activating DDIs can now be turned on/off
via a kernel command line option systemd.allow_userspace_verity= and
an environment variable SYSTEMD_ALLOW_USERSPACE_VERITY=.
* ext4/xfs file system quota handling has been reworked, so that
quotacheck and quotaon are now invoked as per-file-system templated
services (as opposed to single system-wide singletons), similar in
style to the fsck, growfs, pcrfs logic. This means file systems with
quota enabled can now be reasonably enabled at runtime of the system,
not just at boot.
* "systemd-analyze dot" will now also show BindsTo= dependencies.
* systemd-debug-generator gained the ability to add arbitrary units
based on them being passed in via system credentials.
* A new kernel command-line option systemd.default_debug_tty= can be
used to specify the TTY for the debug shell, independently of
enabling or disabling it.
* portablectl gained a new --clean switch that clears a portable
service's data (cache, logs, state, runtime, fdstore) when detaching
it.
Contributions from: A S Alam, AKHIL KUMAR,
Abraham Samuel Adekunle, Adrian Vovk, Adrian Wannenmacher,
Alan Liang, Alberto Planas, Alexander Zavyalov, Anders Jonsson,
Andika Triwidada, Andres Beltran, Andrew Sayers,
Antonio Alvarez Feijoo, Arian van Putten, Arthur Zamarin,
Artur Pak, AtariDreams, Benjamin Franzke, Bernhard M. Wiedemann,
Black-Hole1, Bryan Jacobs, Burak Gerz, Carlos Garnacho,
Chandra Pratap, Chris Hofstaedtler, Chris Packham, Chris Simons,
Christian Göttsche, Christian Wesselhoeft, Clayton Craft,
Colin Geniet, Colin Walters, Colin Watson, Costa Tsaousis,
Cristian Rodríguez, Daan De Meyer, Damien Challet, Dan Streetman,
Daniel Winzen, Daniele Medri, David Seifert, David Tardon,
David Venhoek, Diego Viola, Dionna Amalie Glaze,
Dmitry Konishchev, Dmitry V. Levin, Edson Juliano Drosdeck,
Eisuke Kawashima, Eli Schwartz, Emanuele Giuseppe Esposito,
Eric Daigle, Evgeny Vereshchagin, Felix Riemann,
Fernando Fernandez Mancera, Florian Fainelli, Florian Schmaus,
Franck Bui, Frantisek Sumsal, Friedrich Altheide,
Gabríel Arthúr Pétursson, Gaël Donval, Georges Basile Stavracas Neto,
Gerd Hoffmann, GNOME Foundation, Guido Leenders,
Guilhem Lettron, Göran Uddeborg, Hans de Goede, Harald Brinkmann,
Heinrich Schuchardt, Helmut Grohne, Henry Li, Heran Yang,
Holger Assmann, Ivan Kruglov, Ivan Shapovalov, Jakub Sitnicki,
James Muir, Jan Engelhardt, Jan Macku, Jarne Förster, Jeff King,
Jian-Hong Pan, JmbFountain, Joakim Nohlgård, Jonathan Conder,
Julius Alexandre, Jörg Behrmann, Kai Lueke, Kamil Szczęk,
KayJay7, Keian, Kirk, Kristian Klausen, Krzesimir Nowak,
Lain "Fearyncess" Yang, Lars Ellenberg, Lennart Poettering,
Leonard, Luca Boccassi, Lucas Salles, Ludwig Nussel,
Lukáš Nykrýn, Luna Jernberg, Luxiter, Maanya Goenka,
Maciej S. Szmigiero, Mariano Giménez, Markus Merklinger,
Martin Ivicic, Martin Srebotnjak, Martin Trigaux, Martin Wilck,
Mathias Lang, Matt Layher, Matt Muggeridge, Matteo Croce,
Matthias Lisin, Max Gautier, Max Staudt, MaxHearnden,
Michael Biebl, Michal Koutný, Michal Sekletár, Michał Kopeć,
Mike Gilbert, Mike Yuan, Mikko Ylinen, MkfsSion, Moritz Sanft,
MrSmör, Nandakumar Raghavan, Nicholas Little, Nick Cao,
Nick Rosbrook, Nicolas Bouchinet, Norbert Lange,
Ole Peder Brandtzæg, Ondrej Kozina, Oğuz Ersen,
Pablo Méndez Hernández, Pierre GRASSER, Piotr Drąg, QuonXF,
Radoslav Kolev, Rafaël Kooi, Raito Bezarius, Rasmus Villemoes,
Reid Wahl, Renjaya Raga Zenta, Richard Maw, Roland Hieber,
Ronan Pigott, Rose, Ross Burton, Saliba-san, Sam Leonard,
Samuel BF, Sarvajith Adyanthaya, Scrambled 777,
Sebastian Pucilowski, Sergei Zhmylev, Sergey A, Shulhan,
SidhuRupinder, Simon Fowler, Skia, Sludge, Stuart Hayhurst,
Susant Sahani, Takashi Sakamoto, Temuri Doghonadze, Thayne McCombs,
Thilo Fromm, Thomas Blume, Tiago Rocha Cunha, Timo Rothenpieler,
TobiPeterG, Tobias Fleig, Tomáš Pecka, Topi Miettinen,
Tycho Andersen, Unique-Usman, Usman Akinyemi, Vasiliy Kovalev,
Vasiliy Stelmachenok, Victor Berchet, Vishal Chillara Srinivas,
Vitaly Kuznetsov, Vito Caputo, Vladimir Stoiakin, Werner Sembach,
Will Springer, Winterhuman, Xiaotian Wu, Yu Watanabe,
Yuri Chornoivan, Zbigniew Jędrzejewski-Szmek, Zmyeir, anphir,
aslepykh, chenjiayi, cpackham-atlnz, cunshunxia, djantti, drewbug,
hanjinpeng, hfavisado, hulkoba, hydrargyrum, ksaleem, mburucuyapy,
medusalix, mille-feuille, mkubiak, mooo, msizanoen, networkException,
nl6720, r-vdp, runiq, sam-leonard-ct, samuelvw01, sharad3001, spdfnet,
sushmbha, wangyuhang, zeroskyx, zzywysm, İ. Ensar Gülşen,
Łukasz Stelmach, Štěpán Němec, 我超厉害, 김인수
— Edinburgh, 2024-06-11
CHANGES WITH 255:
Announcements of Future Feature Removals and Incompatible Changes:
* Support for split-usr (/usr/ mounted separately during late boot,
instead of being mounted by the initrd before switching to the rootfs)
and unmerged-usr (parallel directories /bin/ and /usr/bin/, /lib/ and
/usr/lib/, …) has been removed. For more details, see:
https://lists.freedesktop.org/archives/systemd-devel/2022-September/048352.html
* We intend to remove cgroup v1 support from a systemd release after
the end of 2023. If you run services that make explicit use of
cgroup v1 features (i.e. the "legacy hierarchy" with separate
hierarchies for each controller), please implement compatibility with
cgroup v2 (i.e. the "unified hierarchy") sooner rather than later.
Most of Linux userspace has been ported over already.
* Support for System V service scripts is now deprecated and will be
removed in a future release. Please make sure to update your software
*now* to include a native systemd unit file instead of a legacy
System V script to retain compatibility with future systemd releases.
* Support for the SystemdOptions EFI variable is deprecated.
'bootctl systemd-efi-options' will emit a warning when used. It seems
that this feature is little-used and it is better to use alternative
approaches like credentials and confexts. The plan is to drop support
altogether at a later point, but this might be revisited based on
user feedback.
* systemd-run's switch --expand-environment= which currently is disabled
by default when combined with --scope, will be changed in a future
release to be enabled by default.
* "systemctl switch-root" is now restricted to initrd transitions only.
Transitions between real systems should be done with
"systemctl soft-reboot" instead.
* The "ip=off" and "ip=none" kernel command line options interpreted by
systemd-network-generator will now result in IPv6RA + link-local
addressing being disabled, too. Previously DHCP was turned off, but
IPv6RA and IPv6 link-local addressing was left enabled.
* The NAMING_BRIDGE_MULTIFUNCTION_SLOT naming scheme has been deprecated
and is now disabled.
* SuspendMode=, HibernateState= and HybridSleepState= in the [Sleep]
section of systemd-sleep.conf are now deprecated and have no effect.
They did not (and could not) take any value other than the respective
default. HybridSleepMode= is also deprecated, and will now always use
the 'suspend' disk mode.
Service Manager:
* The way services are spawned has been overhauled. Previously, a
process was forked that shared all of the manager's memory (via
copy-on-write) while doing all the required setup (e.g.: mount
namespaces, CGroup configuration, etc.) before exec'ing the target
executable. This was problematic for various reasons: several glibc
APIs were called that are not supposed to be used after a fork but
before an exec, copy-on-write meant that if either process (the
manager or the child) touched a memory page a copy was triggered, and
also the memory footprint of the child process was that of the
manager, but with the memory limits of the service. From this version
onward, the new process is spawned using CLONE_VM and CLONE_VFORK
semantics via posix_spawn(3), and it immediately execs a new internal
binary, systemd-executor, that receives the configuration to apply
via memfd, and sets up the process before exec'ing the target
executable. The systemd-executor binary is pinned by file descriptor
by each manager instance (system and users), and the reference is
updated on daemon-reexec - it is thus important to reexec all running
manager instances when the systemd-executor and/or libsystemd*
libraries are updated on the filesystem.
* Most of the internal process tracking is being changed to use PIDFDs
instead of PIDs when the kernel supports it, to improve robustness
and reliability.
* A new option SurviveFinalKillSignal= can be used to configure the
unit to be skipped in the final SIGTERM/SIGKILL spree on shutdown.
This is part of the required configuration to let a unit's processes
survive a soft-reboot operation.
* System extension images (sysext) can now set
EXTENSION_RELOAD_MANAGER=1 in their extension-release files to
automatically reload the service manager (PID 1) when
merging/refreshing/unmerging on boot. Generally, while this can be
used to ship services in system extension images it's recommended to
do that via portable services instead.
* The ExtensionImages= and ExtensionDirectories= options now support
confexts images/directories.
* A new option CoredumpReceive= can be set for service and scope units,
together with Delegate=yes, to make systemd-coredump on the host
forward core files from processes crashing inside the delegated
CGroup subtree to systemd-coredump running in the container. This new
option is by default used by systemd-nspawn containers that use the
"--boot" switch.
* A new ConditionSecurity=measured-uki option is now available, to ensure
a unit can only run when the system has been booted from a measured UKI.
* MemoryAvailable= now considers physical memory if there are no CGroup
memory limits set anywhere in the tree.
* The $USER environment variable is now always set for services, while
previously it was only set if User= was specified. A new option
SetLoginEnvironment= is now supported to determine whether to also set
$HOME, $LOGNAME, and $SHELL.
* Socket units now support a new pair of
PollLimitBurst=/PollLimitInterval= options to configure a limit on
how often polling events on the file descriptors backing this unit
will be considered within a time window.
* Scope units can now be created using PIDFDs instead of PIDs to select
the processes they should include.
* Sending SIGRTMIN+18 with 0x500 as sigqueue() value will now cause the
manager to dump the list of currently pending jobs.
* If the kernel supports MOVE_MOUNT_BENEATH, the systemctl and
machinectl bind and mount-image verbs will now cause the new mount to
replace the old mount (if any), instead of overmounting it.
* Units now have MemoryPeak, MemorySwapPeak, MemorySwapCurrent and
MemoryZSwapCurrent properties, which respectively contain the values
of the cgroup v2's memory.peak, memory.swap.peak, memory.swap.current
and memory.zswap.current properties. This information is also shown in
"systemctl status" output, if available.
TPM2 Support + Disk Encryption & Authentication:
* systemd-cryptenroll now allows specifying a PCR bank and explicit hash
value in the --tpm2-pcrs= option.
* systemd-cryptenroll now allows specifying a TPM2 key handle (nv
index) to be used instead of the default SRK via the new
--tpm2-seal-key-handle= option.
* systemd-cryptenroll now allows TPM2 enrollment using only a TPM2
public key (in TPM2B_PUBLIC format) – without access to the TPM2
device itself – which enables offline sealing of LUKS images for a
specific TPM2 chip, as long as the SRK public key is known. Pass the
public to the tool via the new --tpm2-device-key= switch.
* systemd-cryptsetup is now installed in /usr/bin/ and is no longer an
internal-only executable.
* The TPM2 Storage Root Key will now be set up, if not already present,
by a new systemd-tpm2-setup.service early boot service. The SRK will
be stored in PEM format and TPM2_PUBLIC format (the latter is useful
for systemd-cryptenroll --tpm2-device-key=, as mentioned above) for
easier access. A new "srk" verb has been added to systemd-analyze to
allow extracting it on demand if it is already set up.
* The internal systemd-pcrphase executable has been renamed to
systemd-pcrextend.
* The systemd-pcrextend tool gained a new --pcr= switch to override
which PCR to measure into.
* systemd-pcrextend now exposes a Varlink interface at
io.systemd.PCRExtend that can be used to do measurements and event
logging on demand.
* TPM measurements are now also written to an event log at
/run/log/systemd/tpm2-measure.log, using a derivative of the TCG
Canonical Event Log format. Previously we'd only log them to the
journal, where they however were subject to rotation and similar.
* A new component "systemd-pcrlock" has been added that allows managing
local TPM2 PCR policies for PCRs 0-7 and similar, which are hard to
predict by the OS vendor because of the inherently local nature of
what measurements they contain, such as firmware versions of the
system and extension cards and suchlike. pcrlock can predict PCR
measurements ahead of time based on various inputs, such as the local
TPM2 event log, GPT partition tables, PE binaries, UKI kernels, and
various other things. It can then pre-calculate a TPM2 policy from
this, which it stores in an TPM2 NV index. TPM2 objects (such as disk
encryption keys) can be locked against this NV index, so that they
are locked against a specific combination of system firmware and
state. Alternatives for each component are supported to allowlist
multiple kernel versions or boot loader version simultaneously
without losing access to the disk encryption keys. The tool can also
be used to analyze and validate the local TPM2 event log.
systemd-cryptsetup, systemd-cryptenroll, systemd-repart have all been
updated to support such policies. There's currently no support for
locking the system's root disk against a pcrlock policy, this will be
added soon. Moreover, it is currently not possible to combine a
pcrlock policy with a signed PCR policy. This component is
experimental and its public interface is subject to change.
systemd-boot, systemd-stub, ukify, bootctl, kernel-install:
* bootctl will now show whether the system was booted from a UKI in its
status output.
* systemd-boot and systemd-stub now use different project keys in their
respective SBAT sections, so that they can be revoked individually if
needed.
* systemd-boot will no longer load unverified DeviceTree blobs when UEFI
SecureBoot is enabled. For more details see:
https://github.com/systemd/systemd/security/advisories/GHSA-6m6p-rjcq-334c
* systemd-boot gained new hotkeys to reboot and power off the system
from the boot menu ("B" and "O"). If the "auto-poweroff" and
"auto-reboot" options in loader.conf are set these entries are also
shown as menu items (which is useful on devices lacking a regular
keyboard).
* systemd-boot gained a new configuration value "menu-disabled" for the
set-timeout option, to allow completely disabling the boot menu,
including the hotkey.
* systemd-boot will now measure the content of loader.conf in TPM2
PCR 5.
* systemd-stub will now concatenate the content of all kernel
command-line addons before measuring them in TPM2 PCR 12, in a single
measurement, instead of measuring them individually.
* systemd-stub will now measure and load DeviceTree Blob addons, which
are searched and loaded following the same model as the existing
kernel command-line addons.
* systemd-stub will now ignore unauthenticated kernel command line options
passed from systemd-boot when running inside Confidential VMs with UEFI
SecureBoot enabled.
* systemd-stub will now load a DeviceTree blob even if the firmware did
not load any beforehand (e.g.: for ACPI systems).
* ukify is no longer considered experimental, and now ships in /usr/bin/.
* ukify gained a new verb inspect to describe the sections of a UKI and
print the contents of the well-known sections.
* ukify gained a new verb genkey to generate a set of key pairs for
signing UKIs and their PCR data.
* The 90-loaderentry kernel-install hook now supports installing device
trees.
* kernel-install now supports the --json=, --root=, --image=, and
--image-policy= options for the inspect verb.
* kernel-install now supports new list and add-all verbs. The former
lists all installed kernel images (if those are available in
/usr/lib/modules/). The latter will install all the kernels it can
find to the ESP.
systemd-repart:
* A new option --copy-from= has been added that synthesizes partition
definitions from the given image, which are then applied by the
systemd-repart algorithm.
* A new option --copy-source= has been added, which can be used to specify
a directory to which CopyFiles= is considered relative to.
* New --make-ddi=confext, --make-ddi=sysext, and --make-ddi=portable
options have been added to make it easier to generate these types of
DDIs, without having to provide repart.d definitions for them.
* The dm-verity salt and UUID will now be derived from the specified
seed value.
* New VerityDataBlockSizeBytes= and VerityHashBlockSizeBytes= can now be
configured in repart.d/ configuration files.
* A new Subvolumes= setting is now supported in repart.d/ configuration
files, to indicate which directories in the target partition should be
btrfs subvolumes.
* A new --tpm2-device-key= option can be used to lock a disk against a
specific TPM2 public key. This matches the same switch the
systemd-cryptenroll tool now supports (see above).
Journal:
* The journalctl --lines= parameter now accepts +N to show the oldest N
entries instead of the newest.
* journald now ensures that sealing happens once per epoch, and sets a
new compatibility flag to distinguish old journal files that were
created before this change, for backward compatibility.
Device Management:
* udev will now create symlinks to loopback block devices in the
/dev/disk/by-loop-ref/ directory that are based on the .lo_file_name
string field selected during allocation. The systemd-dissect tool and
the util-linux losetup command now supports a complementing new switch
--loop-ref= for selecting the string. This means a loopback block
device may now be allocated under a caller-chosen reference and can
subsequently be referenced without first having to look up the block
device name the caller ended up with.
* udev also creates symlinks to loopback block devices in the
/dev/disk/by-loop-inode/ directory based on the .st_dev/st_ino fields
of the inode attached to the loopback block device. This means that
attaching a file to a loopback device will implicitly make a handle
available to be found via that file's inode information.
* udevadm info gained support for JSON output via a new --json= flag, and
for filtering output using the same mechanism that udevadm trigger
already implements.
* The predictable network interface naming logic is extended to include
the SR-IOV-R "representor" information in network interface names.
This feature was intended for v254, but even though the code was
merged, the part that actually enabled the feature was forgotten.
It is now enabled by default and is part of the new "v255" naming
scheme.
* A new hwdb/rules file has been added that sets the
ID_NET_AUTO_LINK_LOCAL_ONLY=1 udev property on all network interfaces
that should usually only be configured with link-local addressing
(IPv4LL + IPv6LL), i.e. for PC-to-PC cables ("laplink") or
Thunderbolt networking. systemd-networkd and NetworkManager (soon)
will make use of this information to apply an appropriate network
configuration by default.
* The ID_NET_DRIVER property on network interfaces is now set
relatively early in the udev rule set so that other rules may rely on
its use. This is implemented in a new "net-driver" udev built-in.
Network Management:
* The "duid-only" option for DHCPv4 client's ClientIdentifier= setting
is now dropped, as it never worked, hence it should not be used by
anyone.
* The 'prefixstable' ipv6 address generation mode now considers the SSID
when generating stable addresses, so that a different stable address
is used when roaming between wireless networks. If you already use
'prefixstable' addresses with wireless networks, the stable address
will be changed by the update.
* The DHCPv4 client gained a RapidCommit option, true by default, which
enables RFC4039 Rapid Commit behavior to obtain a lease in a
simplified 2-message exchange instead of the typical 4-message
exchange, if also supported by the DHCP server.
* The DHCPv4 client gained new InitialCongestionWindow= and
InitialAdvertisedReceiveWindow= options for route configurations.
* The DHCPv4 client gained a new RequestAddress= option that allows
to send a preferred IP address in the initial DHCPDISCOVER message.
* The DHCPv4 server and client gained support for IPv6-only mode
(RFC8925).
* The SendHostname= and Hostname= options are now available for the
DHCPv6 client, independently of the DHCPv4= option, so that these
configuration values can be set independently for each client.
* The DHCPv4 and DHCPv6 client state can now be queried via D-Bus,
including lease information.
* The DHCPv6 client can now be configured to use a custom DUID type.
* .network files gained a new IPv4ReversePathFilter= setting in the
[Network] section, to control sysctl's rp_filter setting.
* .network files gained a new HopLimit= setting in the [Route] section,
to configure a per-route hop limit.
* .network files gained a new TCPRetransmissionTimeoutSec= setting in
the [Route] section, to configure a per-route TCP retransmission
timeout.
* A new directive NFTSet= provides a method for integrating network
configuration into firewall rules with NFT sets. The benefit of using
this setting is that static network configuration or dynamically
obtained network addresses can be used in firewall rules with the
indirection of NFT set types.
* The [IPv6AcceptRA] section supports the following new options:
UsePREF64=, UseHopLimit=, UseICMP6RateLimit=, and NFTSet=.
* The [IPv6SendRA] section supports the following new options:
RetransmitSec=, HopLimit=, HomeAgent=, HomeAgentLifetimeSec=, and
HomeAgentPreference=.
* A new [IPv6PREF64Prefix] set of options, containing Prefix= and
LifetimeSec=, has been introduced to append pref64 options in router
advertisements (RFC8781).
* The network generator now configures the interfaces with only
link-local addressing if "ip=link-local" is specified on the kernel
command line.
* The prefix of the configuration files generated by the network
generator from the kernel command line is now prefixed with '70-',
to make them have higher precedence over the default configuration
files.
* Added a new -Ddefault-network=BOOL meson option, that causes more
.network files to be installed as enabled by default. These configuration
files will which match generic setups, e.g. 89-ethernet.network matches
all Ethernet interfaces and enables both DHCPv4 and DHCPv6 clients.
* If a ID_NET_MANAGED_BY= udev property is set on a network device and
it is any other string than "io.systemd.Network" then networkd will
not manage this device. This may be used to allow multiple network
management services to run in parallel and assign ownership of
specific devices explicitly. NetworkManager will soon implement a
similar logic.
* .network files gained a new MulticastIGMPVersion= setting in the
[Network] section, to control sysctl's
/proc/sys/net/ipv4/conf/INTERFACE/force_igmp_version setting.
systemctl:
* systemctl is-failed now checks the system state if no unit is
specified.
* systemctl will now automatically soft-reboot if a new root file system
is found under /run/nextroot/ when a reboot operation is invoked.
Login management:
* Wall messages now work even when utmp support is disabled, using
systemd-logind to query the necessary information.
* systemd-logind now sends a new PrepareForShutdownWithMetadata D-Bus
signal before shutdown/reboot/soft-reboot that includes additional
information compared to the PrepareForShutdown signal. Currently the
additional information is the type of operation that is about to be
executed.
Hibernation & Suspend:
* The kernel and OS versions will no longer be checked on resume from
hibernation.
* Hibernation into swap files backed by btrfs is now supported.
(Previously this was supported only for other file systems.)
Other:
* A new systemd-vmspawn tool has been added, that aims to provide for VMs
the same interfaces and functionality that systemd-nspawn provides for
containers. For now it supports QEMU as a backend, and exposes some of
its options to the user. This component is experimental and its public
interface is subject to change.
* "systemd-analyze plot" has gained tooltips on each unit name with
related-unit information in its svg output, such as Before=,
Requires=, and similar properties.
* A new varlinkctl tool has been added to allow interfacing with
Varlink services, and introspection has been added to all such
services. This component is experimental and its public interface is
subject to change.
* systemd-sysext and systemd-confext now expose a Varlink service
at io.systemd.sysext.
* portable services now accept confexts as extensions.
* systemd-sysupdate now accepts directories in the MatchPattern= option.
* systemd-run will now output the invocation ID of the launched
transient unit and its peak memory usage.
* systemd-analyze, systemd-tmpfiles, systemd-sysusers, systemd-sysctl,
and systemd-binfmt gained a new --tldr option that can be used instead
of --cat-config to suppress uninteresting configuration lines, such as
comments and whitespace.
* resolvectl gained a new "show-server-state" command that shows
current statistics of the resolver. This is backed by a new
DumpStatistics() Varlink method provided by systemd-resolved.
* systemd-timesyncd will now emit a D-Bus signal when the LinkNTPServers
property changes.
* vconsole now supports KEYMAP=@kernel for preserving the kernel keymap
as-is.
* seccomp now supports the LoongArch64 architecture.
* seccomp may now be enabled for services running as a non-root User=
without NoNewPrivileges=yes.
* systemd-id128 now supports a new -P option to show only values. The
combination of -P and --app options is also supported.
* A new pam_systemd_loadkey.so PAM module is now available, which will
automatically fetch the passphrase used by cryptsetup to unlock the
root file system and set it as the PAM authtok. This enables, among
other things, configuring auto-unlock of the GNOME Keyring / KDE
Wallet when autologin is configured.
* Many meson options now use the 'feature' type, which means they
take enabled/disabled/auto as values.
* A new meson option -Dconfigfiledir= can be used to change where
configuration files with default values are installed to.
* Options and verbs in man pages are now tagged with the version they
were first introduced in.
* A new component "systemd-storagetm" has been added, which exposes all
local block devices as NVMe-TCP devices, fully automatically. It's
hooked into a new target unit storage-target-mode.target that is
supposed to be booted into via
rd.systemd.unit=storage-target-mode.target on the kernel command
line. This is intended to be used for installers and debugging to
quickly get access to the local disk. It's inspired by MacOS "target
disk mode". This component is experimental and its public interface is
subject to change.
* A new component "systemd-bsod" has been added, which can show logged
error messages full screen, if they have a log level of LOG_EMERG log
level. This component is experimental and its public interface is
subject to change.
* The systemd-dissect tool's --with command will now set the
$SYSTEMD_DISSECT_DEVICE environment variable to the block device it
operates on for the invoked process.
* The systemd-mount tool gained a new --tmpfs switch for mounting a new
'tmpfs' instance. This is useful since it does so via .mount units
and thus can be executed remotely or in containers.
* The various tools in systemd that take "verbs" (such as systemctl,
loginctl, machinectl, …) now will suggest a close verb name in case
the user specified an unrecognized one.
* libsystemd now exports a new function sd_id128_get_app_specific()
that generates "app-specific" 128bit IDs from any ID. It's similar to
sd_id128_get_machine_app_specific() and
sd_id128_get_boot_app_specific() but takes the ID to base calculation
on as input. This new functionality is also exposed in the
systemd-id128 tool where you can now combine --app= with 'show'.
* All tools that parse timestamps now can also parse RFC3339 style
timestamps that include the "T" and Z" characters.
* New documentation has been added:
https://systemd.io/FILE_DESCRIPTOR_STORE
https://systemd.io/TPM2_PCR_MEASUREMENTS
https://systemd.io/MOUNT_REQUIREMENTS
* The codebase now recognizes the suffix .confext.raw and .sysext.raw
as alternative to the .raw suffix generally accepted for DDIs. It is
recommended to name configuration extensions and system extensions
with such suffixes, to indicate their purpose in the name.
* The sd-device API gained a new function
sd_device_enumerator_add_match_property_required() which allows
configuring matches on properties that are strictly required. This is
different from the existing sd_device_enumerator_add_match_property()
matches of which one needs to apply.
* The MAC address the veth side of an nspawn container shall get
assigned may now be controlled via the $SYSTEMD_NSPAWN_NETWORK_MAC
environment variable.
* The libiptc dependency is now implemented via dlopen(), so that tools
such as networkd and nspawn no longer have a hard dependency on the
shared library when compiled with support for libiptc.
* New rpm macros have been added: %systemd_user_daemon_reexec does
daemon-reexec for all user managers, and %systemd_postun_with_reload
and %systemd_user_postun_with_reload do a reload for system and user
units on upgrades.
* coredumpctl now propagates SIGTERM to the debugger process.
Contributions from: 김인수, Abderrahim Kitouni, Adam Goldman,
Adam Williamson, Alexandre Peixoto Ferreira, Alex Hudspith,
Alvin Alvarado, André Paiusco, Antonio Alvarez Feijoo,
Anton Lundin, Arian van Putten, Arseny Maslennikov, Arthur Shau,
Balázs Úr, beh_10257, Benjamin Peterson, Bertrand Jacquin,
Brian Norris, Charles Lee, Cheng-Chia Tseng, Chris Patterson,
Christian Hergert, Christian Hesse, Christian Kirbach,
Clayton Craft, commondservice, cunshunxia, Curtis Klein, cvlc12,
Daan De Meyer, Daniele Medri, Daniel P. Berrangé, Daniel Rusek,
Daniel Thompson, Dan Nicholson, Dan Streetman, David Rheinsberg,
David Santamaría Rogado, David Tardon, dependabot[bot],
Diego Viola, Dmitry V. Levin, Emanuele Giuseppe Esposito,
Emil Renner Berthing, Emil Velikov, Etienne Dechamps, Fabian Vogt,
felixdoerre, Felix Dörre, Florian Schmaus, Franck Bui,
Frantisek Sumsal, G2-Games, Gioele Barabucci, Hugo Carvalho,
huyubiao, Iago López Galeiras, IllusionMan1212, Jade Lovelace,
janana, Jan Janssen, Jan Kuparinen, Jan Macku, Jeremy Fleischman,
Jin Liu, jjimbo137, Joerg Behrmann, Johannes Segitz, Jordan Rome,
Jordan Williams, Julien Malka, Juno Computers, Khem Raj, khm,
Kingbom Dou, Kiran Vemula, Krzesimir Nowak, Laszlo Gombos,
Lennart Poettering, linuxlion, Luca Boccassi, Lucas Adriano Salles,
Lukas, Lukáš Nykrýn, Maanya Goenka, Maarten, Malte Poll,
Marc Pervaz Boocha, Martin Beneš, Martin Joerg, Martin Wilck,
Mathieu Tortuyaux, Matthias Schiffer, Maxim Mikityanskiy,
Max Kellermann, Michael A Cassaniti, Michael Biebl, Michael Kuhn,
Michael Vasseur, Michal Koutný, Michal Sekletár, Mike Yuan,
Milton D. Miller II, mordner, msizanoen, NAHO, Nandakumar Raghavan,
Neil Wilson, Nick Rosbrook, Nils K, NRK, Oğuz Ersen,
Omojola Joshua, onenowy, Paul Meyer, Paymon MARANDI, pelaufer,
Peter Hutterer, PhylLu, Pierre GRASSER, Piotr Drąg, Priit Laes,
Rahil Bhimjiani, Raito Bezarius, Raul Cheleguini, Reto Schneider,
Richard Maw, Robby Red, RoepLuke, Roland Hieber, Roland Singer,
Ronan Pigott, Sam James, Sam Leonard, Sergey A, Susant Sahani,
Sven Joachim, Tad Fisher, Takashi Sakamoto, Thorsten Kukuk, Tj,
Tomasz Świątek, Topi Miettinen, Valentin David,
Valentin Lefebvre, Victor Westerhuis, Vincent Haupert,
Vishal Chillara Srinivas, Vito Caputo, Warren, Weblate,
Xiaotian Wu, xinpeng wang, Yaron Shahrabani, Yo-Jung Lin,
Yu Watanabe, Zbigniew Jędrzejewski-Szmek, zeroskyx,
Дамјан Георгиевски, наб
— Edinburgh, 2023-12-06
CHANGES WITH 254:
Announcements of Future Feature Removals and Incompatible Changes:
* The next release (v255) will remove support for split-usr (/usr/
mounted separately during late boot, instead of being mounted by the
initrd before switching to the rootfs) and unmerged-usr (parallel
directories /bin/ and /usr/bin/, /lib/ and /usr/lib/, …). For more
details, see:
https://lists.freedesktop.org/archives/systemd-devel/2022-September/048352.html
* We intend to remove cgroup v1 support from a systemd release after
the end of 2023. If you run services that make explicit use of
cgroup v1 features (i.e. the "legacy hierarchy" with separate
hierarchies for each controller), please implement compatibility with
cgroup v2 (i.e. the "unified hierarchy") sooner rather than later.