HALF ECHO LEARN / REFERENCE COLLECTION
v262.2man/systemd.service.xml
Git blob: 3877cd6101a1cb76cd56ea29a9f82e2da67777a8
Lines 1–1000 of 2,015
<?xml version='1.0'?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
<refentry id="systemd.service" xmlns:xi="http://www.w3.org/2001/XInclude">
<refentryinfo>
<title>systemd.service</title>
<productname>systemd</productname>
</refentryinfo>
<refmeta>
<refentrytitle>systemd.service</refentrytitle>
<manvolnum>5</manvolnum>
</refmeta>
<refnamediv>
<refname>systemd.service</refname>
<refpurpose>Service unit configuration</refpurpose>
</refnamediv>
<refsynopsisdiv>
<para><filename><replaceable>service</replaceable>.service</filename></para>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>A unit configuration file whose name ends in
<literal>.service</literal> encodes information about a process
controlled and supervised by systemd.</para>
<para>This man page lists the configuration options specific to
this unit type. See
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for the common options of all unit configuration files. The common
configuration items are configured in the generic
[Unit] and [Install]
sections. The service specific configuration options are
configured in the [Service] section.</para>
<para>Additional options are listed in
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
which define the execution environment the commands are executed
in, and in
<citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
which define the way the processes of the service are terminated,
and in
<citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
which configure resource control settings for the processes of the
service.</para>
<para>The <citerefentry><refentrytitle>systemd-run</refentrytitle><manvolnum>1</manvolnum></citerefentry>
command allows creating <filename>.service</filename> and <filename>.scope</filename> units dynamically
and transiently from the command line.</para>
</refsect1>
<refsect1>
<title>Service Templates</title>
<para>It is possible for <command>systemd</command> services to take a single argument via the
<literal><replaceable>service</replaceable>@<replaceable>argument</replaceable>.service</literal>
syntax. Such services are called "instantiated" services, while the unit definition without the
<replaceable>argument</replaceable> parameter is called a "template". An example could be a
<filename>dhcpcd@.service</filename> service template which takes a network interface as a
parameter to form an instantiated service. Within the service file, this parameter or "instance
name" can be accessed with %-specifiers. See
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details.</para>
</refsect1>
<refsect1>
<title>Automatic Dependencies</title>
<refsect2>
<title>Implicit Dependencies</title>
<para>The following dependencies are implicitly added:</para>
<itemizedlist>
<listitem><para>Services with <varname>Type=dbus</varname> set automatically
acquire dependencies of type <varname>Requires=</varname> and
<varname>After=</varname> on
<filename>dbus.socket</filename>.</para></listitem>
<listitem><para>Socket activated services are automatically ordered after
their activating <filename>.socket</filename> units via an
automatic <varname>After=</varname> dependency.
Services also pull in all <filename>.socket</filename> units
listed in <varname>Sockets=</varname> via automatic
<varname>Wants=</varname> and <varname>After=</varname> dependencies.</para></listitem>
</itemizedlist>
<para>Additional implicit dependencies may be added as result of
execution and resource control parameters as documented in
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
and
<citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
</refsect2>
<refsect2>
<title>Default Dependencies</title>
<para>The following dependencies are added unless <varname>DefaultDependencies=no</varname> is set:</para>
<itemizedlist>
<listitem><para>Service units will have dependencies of type <varname>Requires=</varname> and
<varname>After=</varname> on <filename>sysinit.target</filename>, a dependency of type <varname>After=</varname> on
<filename>basic.target</filename> as well as dependencies of type <varname>Conflicts=</varname> and
<varname>Before=</varname> on <filename>shutdown.target</filename>. These ensure that normal service units pull in
basic system initialization, and are terminated cleanly prior to system shutdown. Only services involved with early
boot or late system shutdown should disable this option.</para></listitem>
<listitem><para>Instanced service units (i.e. service units with an <literal>@</literal> in their name) are assigned by
default a per-template slice unit (see
<citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>), named after the
template unit, containing all instances of the specific template. This slice is normally stopped at shutdown,
together with all template instances. If that is not desired, set <varname>DefaultDependencies=no</varname> in the
template unit, and either define your own per-template slice unit file that also sets
<varname>DefaultDependencies=no</varname>, or set <varname>Slice=system.slice</varname> (or another suitable slice)
in the template unit. Also see
<citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para></listitem>
</itemizedlist>
</refsect2>
</refsect1>
<refsect1>
<title>Options</title>
<para>Service unit files may include [Unit] and [Install] sections, which are described in
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
<para>Service unit files must include a [Service]
section, which carries information about the service and the
process it supervises. A number of options that may be used in
this section are shared with other unit types. These options are
documented in
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>
and
<citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
The options specific to the [Service] section
of service units are the following:</para>
<variablelist class='unit-directives'>
<varlistentry>
<term><varname>Type=</varname></term>
<listitem>
<para>Configures the mechanism via which the service notifies the manager that the service start-up
has finished. One of <option>simple</option>, <option>exec</option>, <option>forking</option>,
<option>oneshot</option>, <option>dbus</option>, <option>notify</option>,
<option>notify-reload</option>, or <option>idle</option>:</para>
<itemizedlist>
<listitem><para>If set to <option>simple</option> (the default if <varname>ExecStart=</varname>
is specified but neither <varname>Type=</varname> nor <varname>BusName=</varname> are, and
credentials are not used), the service manager will consider the unit started immediately after
the main service process has been forked off (i.e. immediately after <function>fork()</function>,
and before various process attributes have been configured and in particular before the new process
has called <function>execve()</function> to invoke the actual service binary). Typically,
<varname>Type=</varname><option>exec</option> is the better choice, see below.</para>
<para>It is expected that the process configured with <varname>ExecStart=</varname> is the main
process of the service. In this mode, if the process offers functionality to other processes on
the system, its communication channels should be installed before the service is started up
(e.g. sockets set up by systemd, via socket activation), as the service manager will immediately
proceed starting follow-up units, right after creating the main service process, and before
executing the service's binary. Note that this means <command>systemctl start</command> command
lines for <option>simple</option> services will report success even if the service's binary
cannot be invoked successfully (for example because the selected <varname>User=</varname> does not
exist, or the service binary is missing).</para></listitem>
<listitem><para>The <option>exec</option> type is similar to <option>simple</option>, but the
service manager will consider the unit started immediately after the main service binary has been
executed. The service manager will delay starting of follow-up units until that point. (Or in
other words: <option>simple</option> proceeds with further jobs right after
<function>fork()</function> returns, while <option>exec</option> will not proceed before both
<function>fork()</function> and <function>execve()</function> in the service process succeeded.)
Note that this means <command>systemctl start</command> command lines for <option>exec</option>
services will report failure when the service's binary cannot be invoked successfully (for
example because the selected <varname>User=</varname> does not exist, or the service binary is
missing). This type is implied if credentials are used (refer to <varname>LoadCredential=</varname>
in <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details).</para></listitem>
<listitem><para>If set to <option>forking</option>, the manager will consider the unit started
immediately after the binary that forked off by the manager exits. <emphasis>The use of this type
is discouraged, use <option>notify</option>, <option>notify-reload</option>, or
<option>dbus</option> instead.</emphasis></para>
<para>It is expected that the process configured with <varname>ExecStart=</varname> will call
<function>fork()</function> as part of its start-up. The parent process is expected to exit when
start-up is complete and all communication channels are set up. The child continues to run as the
main service process, and the service manager will consider the unit started when the parent
process exits. This is the behavior of traditional UNIX services. If this setting is used, it is
recommended to also use the <varname>PIDFile=</varname> option, so that systemd can reliably
identify the main process of the service. The manager will proceed with starting follow-up units
after the parent process exits.</para></listitem>
<listitem><para>Behavior of <option>oneshot</option> is similar to <option>exec</option>;
however, the service manager will consider the unit up after the main process exits. It will then
start follow-up units. <varname>RemainAfterExit=</varname> is particularly useful for this type
of service. <varname>Type=</varname><option>oneshot</option> is the implied default if neither
<varname>Type=</varname> nor <varname>ExecStart=</varname> are specified. Note that if this
option is used without <varname>RemainAfterExit=</varname> the service will never enter
<literal>active</literal> unit state, but will directly transition from
<literal>activating</literal> to <literal>deactivating</literal> or <literal>dead</literal>,
since no process is configured that shall run continuously. In particular this means that after a
service of this type ran (and which has <varname>RemainAfterExit=</varname> not set) it will not
show up as started afterwards, but as dead.</para></listitem>
<listitem><para>Behavior of <option>dbus</option> is similar to <option>simple</option>; however,
units of this type must have the <varname>BusName=</varname> specified and the service manager
will consider the unit up when the specified bus name has been acquired. This type is the default
if <varname>BusName=</varname> is specified.</para>
<para>Service units with this option configured implicitly gain dependencies on the
<filename>dbus.socket</filename> unit. A service unit of this type is considered to be in the
activating state until the specified bus name is acquired. It is considered activated while the
bus name is taken. Once the bus name is released the service is considered being no longer
functional which has the effect that the service manager attempts to terminate any remaining
processes belonging to the service. Services that drop their bus name as part of their shutdown
logic thus should be prepared to receive a <constant>SIGTERM</constant> (or whichever signal is
configured in <varname>KillSignal=</varname>) as result.</para></listitem>
<listitem><para>Behavior of <option>notify</option> is similar to <option>exec</option>; however,
it is expected that the service sends a <literal>READY=1</literal> notification message via
<citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry> or
an equivalent call when it has finished starting up. systemd will proceed with starting follow-up
units after this notification message has been sent. If this option is used,
<varname>NotifyAccess=</varname> (see below) should be set to open access to the notification
socket provided by systemd. If <varname>NotifyAccess=</varname> is missing or set to
<option>none</option>, it will be forcibly set to <option>main</option>.</para>
<para>If the service supports reloading, and uses a signal to start the reload, using
<option>notify-reload</option> instead is recommended.</para></listitem>
<listitem><para>Behavior of <option>notify-reload</option> is similar to <option>notify</option>,
with one difference: the <constant>SIGHUP</constant> UNIX process signal is sent to the service's
main process when the service is asked to reload and the manager will wait for a notification
about the reload being finished.</para>
<para>When initiating the reload process the service is expected to reply with a notification
message via
<citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>
that contains the <literal>RELOADING=1</literal> field in combination with
<literal>MONOTONIC_USEC=</literal> set to the current monotonic time
(i.e. <constant>CLOCK_MONOTONIC</constant> in
<citerefentry><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry>)
in μs, formatted as decimal string. Once reloading is complete another notification message must
be sent, containing <literal>READY=1</literal>. Using this service type and implementing this
reload protocol is an efficient alternative to providing an <varname>ExecReload=</varname>
command for reloading of the service's configuration.</para>
<para>The signal to send can be tweaked via <varname>ReloadSignal=</varname>, see below.</para>
<para>For <option>notify-reload</option> services, systemd verifies that the service's main process
has actually installed a handler for the configured reload signal (by default
<constant>SIGHUP</constant>). This verification checks for both traditional signal handlers (via
<citerefentry project="man-pages"><refentrytitle>sigaction</refentrytitle><manvolnum>2</manvolnum></citerefentry>)
and blocked signals that are typically handled via
<citerefentry project="man-pages"><refentrytitle>signalfd</refentrytitle><manvolnum>2</manvolnum></citerefentry>.
This verification is performed at two points:</para>
<orderedlist>
<listitem><para>When the service first sends <literal>READY=1</literal> during initial startup. If no
signal handler is detected at this point, the service startup is aborted.</para></listitem>
<listitem><para>Immediately before sending the reload signal. If the handler is no longer present,
systemd logs a warning but the reload signal is still sent.</para></listitem>
</orderedlist>
<para>This prevents accidentally starting services that lack the required signal handler. Services
using <option>notify-reload</option> must install their reload signal handler before sending the
initial <literal>READY=1</literal> notification.</para>
</listitem>
<listitem><para>Behavior of <option>idle</option> is very similar to <option>simple</option>; however,
actual execution of the service program is delayed until all active jobs are dispatched. This may be used
to avoid interleaving of output of shell services with the status output on the console. Note that this
type is useful only to improve console output, it is not useful as a general unit ordering tool, and the
effect of this service type is subject to a 5s timeout, after which the service program is invoked
anyway.</para></listitem>
</itemizedlist>
<para>It is recommended to use <varname>Type=</varname><option>exec</option> for long-running
services, as it ensures that process setup errors (e.g. errors such as a missing service
executable, or missing user) are properly tracked. However, as this service type will not propagate
the failures in the service's own startup code (as opposed to failures in the preparatory steps the
service manager executes before <function>execve()</function>) and does not allow ordering of other
units against completion of initialization of the service code itself (which for example is useful
if clients need to connect to the service through some form of IPC, and the IPC channel is only
established by the service itself — in contrast to doing this ahead of time through socket or bus
activation or similar), it might not be sufficient for many cases. If so, <option>notify</option>,
<option>notify-reload</option>, or <option>dbus</option> (the latter only in case the service
provides a D-Bus interface) are the preferred options as they allow service program code to
precisely schedule when to consider the service started up successfully and when to proceed with
follow-up units. The <option>notify</option>/<option>notify-reload</option> service types require
explicit support in the service codebase (as <function>sd_notify()</function> or an equivalent API
needs to be invoked by the service at the appropriate time) — if it is not supported, then
<option>forking</option> is an alternative: it supports the traditional heavy-weight UNIX service
start-up protocol. Note that using any type other than <option>simple</option> possibly delays the
boot process, as the service manager needs to wait for at least some service initialization to
complete. (Also note it is generally not recommended to use <option>idle</option> or
<option>oneshot</option> for long-running services.)</para>
<para>Note that various service settings (e.g. <varname>User=</varname>, <varname>Group=</varname>
through libc NSS) might result in "hidden" blocking IPC calls to other services when
used. Sometimes it might be advisable to use the <option>simple</option> service type to ensure
that the service manager's transaction logic is not affected by such potentially slow operations
and hidden dependencies, as this is the only service type where the service manager will not wait
for such service execution setup operations to complete before proceeding.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>ExitType=</varname></term>
<listitem>
<para>Specifies when the manager should consider the service to be finished. One of <option>main</option> or
<option>cgroup</option>:</para>
<itemizedlist>
<listitem><para>If set to <option>main</option> (the default), the service manager
will consider the unit stopped when the main process, which is determined according to the
<varname>Type=</varname>, exits.</para></listitem>
<listitem><para>If set to <option>cgroup</option>, the service will be considered running as long as at
least one process in the cgroup has not exited. This option cannot be used with
<varname>Type=</varname><option>oneshot</option>.</para></listitem>
</itemizedlist>
<para>It is generally recommended to use <varname>ExitType=</varname><option>main</option> when a service has
a known forking model and a main process can reliably be determined. <varname>ExitType=</varname>
<option>cgroup</option> is meant for applications whose forking model is not known ahead of time and which
might not have a specific main process. It is well suited for transient or automatically generated services,
such as graphical applications inside of a desktop environment.</para>
<xi:include href="version-info.xml" xpointer="v250"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>RemainAfterExit=</varname></term>
<listitem><para>Takes a boolean value that specifies whether
the service shall be considered active even when all its
processes exited. Defaults to <option>no</option>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>GuessMainPID=</varname></term>
<listitem><para>Takes a boolean value that specifies whether
systemd should try to guess the main PID of a service if it
cannot be determined reliably. This option is ignored unless
<option>Type=forking</option> is set and
<option>PIDFile=</option> is unset because for the other types
or with an explicitly configured PID file, the main PID is
always known. The guessing algorithm might come to incorrect
conclusions if a daemon consists of more than one process. If
the main PID cannot be determined, failure detection and
automatic restarting of a service will not work reliably.
Defaults to <option>yes</option>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PIDFile=</varname></term>
<listitem><para>Takes a path referring to the PID file of the service. Usage of this option is
recommended for services where <varname>Type=</varname> is set to <option>forking</option>. The path
specified typically points to a file below <filename>/run/</filename>. If a relative path is
specified for system service, then it is hence prefixed with <filename>/run/</filename>, and prefixed
with <filename>$XDG_RUNTIME_DIR</filename> if specified in a user service. The service manager will
read the PID of the main process of the service from this file after start-up of the service. The
service manager will not write to the file configured here, although it will remove the file after
the service has shut down if it still exists. The PID file does not need to be owned by a privileged
user, but if it is owned by an unprivileged user additional safety restrictions are enforced: the
file may not be a symlink to a file owned by a different user (neither directly nor indirectly), and
the PID file must refer to a process already belonging to the service.</para>
<para>Note that PID files should be avoided in modern projects. Use <option>Type=notify</option>,
<option>Type=notify-reload</option> or <option>Type=simple</option> where possible, which does not
require use of PID files to determine the main process of a service and avoids needless
forking.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>BusName=</varname></term>
<listitem><para>Takes a D-Bus destination name that this service shall use. This option is mandatory
for services where <varname>Type=</varname> is set to <option>dbus</option>. It is recommended to
always set this property if known to make it easy to map the service name to the D-Bus destination.
In particular, <command>systemctl service-log-level/service-log-target</command> verbs make use of
this.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ExecStart=</varname></term>
<listitem><para>Commands that are executed when this service is started.</para>
<para>Unless <varname>Type=</varname> is <option>oneshot</option>, exactly one command must be
given. When <varname>Type=oneshot</varname> is used, this setting may be used multiple times to
define multiple commands to execute. If the empty string is assigned to this option, the list of
commands to start is reset, prior assignments of this option will have no effect. If no
<varname>ExecStart=</varname> is specified, then the service must have
<varname>RemainAfterExit=yes</varname> and at least one <varname>ExecStop=</varname> line
set. (Services lacking both <varname>ExecStart=</varname> and <varname>ExecStop=</varname> are not
valid.)</para>
<para>If more than one command is configured, the commands are invoked sequentially in the order they
appear in the unit file. If one of the commands fails (and is not prefixed with
<literal>-</literal>), other lines are not executed, and the unit is considered failed.</para>
<para>Unless <varname>Type=forking</varname> is set, the process started via this command line will
be considered the main process of the daemon.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ExecStartPre=</varname></term>
<term><varname>ExecStartPost=</varname></term>
<listitem><para>Additional commands that are executed before or after the command in
<varname>ExecStart=</varname>, respectively. Syntax is the same as for <varname>ExecStart=</varname>.
Multiple command lines are allowed, regardless of the service type (i.e. <varname>Type=</varname>),
and the commands are executed one after the other, serially.</para>
<para>If any of those commands (not prefixed with
<literal>-</literal>) fail, the rest are not executed and the
unit is considered failed.</para>
<para><varname>ExecStart=</varname> commands are only run after
all <varname>ExecStartPre=</varname> commands that were not prefixed
with a <literal>-</literal> exit successfully.</para>
<para><varname>ExecStartPost=</varname> commands are only run after the commands specified in
<varname>ExecStart=</varname> have been invoked successfully, as determined by
<varname>Type=</varname> (i.e. the process has been started for <varname>Type=simple</varname> or
<varname>Type=idle</varname>, the last <varname>ExecStart=</varname> process exited successfully for
<varname>Type=oneshot</varname>, the initial process exited successfully for
<varname>Type=forking</varname>, <literal>READY=1</literal> is sent for
<varname>Type=notify</varname>/<varname>Type=notify-reload</varname>, or the
<varname>BusName=</varname> has been taken for <varname>Type=dbus</varname>).</para>
<para>Note that <varname>ExecStartPre=</varname> may not be
used to start long-running processes. All processes forked
off by processes invoked via <varname>ExecStartPre=</varname> will
be killed before the next service process is run.</para>
<para>Note that if any of the commands specified in <varname>ExecStartPre=</varname>,
<varname>ExecStart=</varname>, or <varname>ExecStartPost=</varname> fail (and are not prefixed with
<literal>-</literal>, see above) or time out before the service is fully up, execution continues with commands
specified in <varname>ExecStopPost=</varname>, the commands in <varname>ExecStop=</varname> are skipped.</para>
<para>Note that the execution of <varname>ExecStartPost=</varname> is taken into account for the purpose of
<varname>Before=</varname>/<varname>After=</varname> ordering constraints.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ExecCondition=</varname></term>
<listitem><para>Optional commands that are executed before the commands in
<varname>ExecStartPre=</varname>. Syntax is the same as for <varname>ExecStart=</varname>. Multiple
command lines are allowed, regardless of the service type (i.e. <varname>Type=</varname>), and the
commands are executed one after the other, serially.</para>
<para>The behavior is like an <varname>ExecStartPre=</varname> and condition check hybrid: when an
<varname>ExecCondition=</varname> command exits with exit code 1 through 254 (inclusive), the remaining
commands are skipped and the unit is <emphasis>not</emphasis> marked as failed. However, if an
<varname>ExecCondition=</varname> command exits with 255 or abnormally (e.g. timeout, killed by a
signal, etc.), the unit will be considered failed (and remaining commands will be skipped). Exit code of 0 or
those matching <varname>SuccessExitStatus=</varname> will continue execution to the next commands.</para>
<para>Note that an <varname>ExecCondition=</varname> skip is <emphasis>not</emphasis> equivalent to a
unit-level <varname>Condition…=</varname> or <varname>Assert…=</varname> check failing. Because
<varname>ExecCondition=</varname> runs as part of the activation transition, a skip causes the unit to
transition from <constant>active</constant> to <constant>inactive</constant>, and consequently
<varname>SuccessAction=</varname> (see
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>) will be
honored. By contrast, <varname>Condition…=</varname> directives in the <literal>[Unit]</literal> section
prevent activation entirely and therefore do not trigger <varname>SuccessAction=</varname>.</para>
<para>The same recommendations about not running long-running processes in <varname>ExecStartPre=</varname>
also applies to <varname>ExecCondition=</varname>. <varname>ExecCondition=</varname> will also run the commands
in <varname>ExecStopPost=</varname>, as part of stopping the service, in the case of any non-zero or abnormal
exits, like the ones described above.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ExecReload=</varname></term>
<listitem><para>Commands to execute to trigger a configuration reload in the service. This setting
may take multiple command lines, following the same scheme as described for
<varname>ExecStart=</varname> above. Use of this setting is optional. Specifier and environment
variable substitution is supported here following the same scheme as for
<varname>ExecStart=</varname>.</para>
<para>One additional, special environment variable is set: if known, <varname>$MAINPID</varname> is
set to the main process of the daemon, and may be used for command lines like the following:</para>
<programlisting>ExecReload=kill -HUP $MAINPID</programlisting>
<para>Note however that reloading a daemon by enqueuing a signal without completion notification
(as is the case with the example line above) is usually not a good choice, because this is an
asynchronous operation and hence not suitable when ordering reloads of multiple services against
each other. It is thus strongly recommended to either use <varname>Type=notify-reload</varname>,
or to set <varname>ExecReload=</varname> to a command that not only triggers a configuration reload
of the daemon, but also synchronously waits for it to complete. For example, <citerefentry
project='mankier'><refentrytitle>dbus-broker</refentrytitle><manvolnum>1</manvolnum></citerefentry>
uses the following:</para>
<programlisting>ExecReload=busctl call org.freedesktop.DBus \
/org/freedesktop/DBus org.freedesktop.DBus \
ReloadConfig
</programlisting>
<para>This setting can be combined with <varname>Type=notify-reload</varname>, in which case
the service main process is signaled after all specified command lines finish execution. Specially,
if <literal>RELOADING=1</literal> notification is received before <varname>ExecReload=</varname>
completes, the signaling is skipped and the service manager immediately starts listening for
<literal>READY=1</literal>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ExecReloadPost=</varname></term>
<listitem><para>Commands to execute after a successful reload operation. Syntax for this setting
is exactly the same as <varname>ExecReload=</varname>.</para>
<xi:include href="version-info.xml" xpointer="v259"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ExecStop=</varname></term>
<listitem><para>Commands to execute to stop the service started via
<varname>ExecStart=</varname>. This argument takes multiple command lines, following the same scheme
as described for <varname>ExecStart=</varname> above. Use of this setting is optional. After the
commands configured in this option are run, it is implied that the service is stopped, and any
processes remaining for it are terminated according to the <varname>KillMode=</varname> setting (see
<citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
If this option is not specified, the process is terminated by sending the signal specified in
<varname>KillSignal=</varname> or <varname>RestartKillSignal=</varname> when service stop is
requested. Specifier and environment variable substitution is supported (including
<varname>$MAINPID</varname>, see above).</para>
<para>Note that it is usually not sufficient to specify a command for this setting that only asks the
service to terminate (for example, by sending some form of termination signal to it), but does not
wait for it to do so. Since the remaining processes of the services are killed according to
<varname>KillMode=</varname> and <varname>KillSignal=</varname> or
<varname>RestartKillSignal=</varname> as described above immediately after the command exited, this
may not result in a clean stop. The specified command should hence be a synchronous operation, not an
asynchronous one.</para>
<para>Note that the commands specified in <varname>ExecStop=</varname> are only executed when the service
started successfully first. They are not invoked if the service was never started at all, or in case its
start-up failed, for example because any of the commands specified in <varname>ExecStart=</varname>,
<varname>ExecStartPre=</varname> or <varname>ExecStartPost=</varname> failed (and were not prefixed with
<literal>-</literal>, see above) or timed out. Use <varname>ExecStopPost=</varname> to invoke commands when a
service failed to start up correctly and is shut down again. Also note that the stop operation is always
performed if the service started successfully, even if the processes in the service terminated on their
own or were killed. The stop commands must be prepared to deal with that case. <varname>$MAINPID</varname>
will be unset if systemd knows that the main process exited by the time the stop commands are called.</para>
<para>Service restart requests are implemented as stop operations followed by start operations. This
means that <varname>ExecStop=</varname> and <varname>ExecStopPost=</varname> are executed during a
service restart operation.</para>
<para>It is recommended to use this setting for commands that communicate with the service requesting
clean termination. For post-mortem clean-up steps use <varname>ExecStopPost=</varname> instead.
</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>ExecStopPost=</varname></term>
<listitem><para>Additional commands that are executed after the service is stopped. This includes cases where
the commands configured in <varname>ExecStop=</varname> were used, where the service does not have any
<varname>ExecStop=</varname> defined, or where the service exited unexpectedly. This argument takes multiple
command lines, following the same scheme as described for <varname>ExecStart=</varname>. Use of these settings
is optional. Specifier and environment variable substitution is supported. Note that – unlike
<varname>ExecStop=</varname> – commands specified with this setting are invoked when a service failed to start
up correctly and is shut down again.</para>
<para>It is recommended to use this setting for clean-up operations that shall be executed even when
the service failed to start up correctly. Commands configured with this setting need to be able to
operate even if the service failed starting up half-way and left incompletely initialized data
around. As the service's processes have likely exited already when the commands specified with this
setting are executed they should not attempt to communicate with them.</para>
<para>Note that all commands that are configured with this setting are invoked with the result code of the
service, as well as the main process' exit code and status, set in the <varname>$SERVICE_RESULT</varname>,
<varname>$EXIT_CODE</varname> and <varname>$EXIT_STATUS</varname> environment variables, see
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
details.</para>
<para>Note that the execution of <varname>ExecStopPost=</varname> is taken into account for the purpose of
<varname>Before=</varname>/<varname>After=</varname> ordering constraints.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>RestartSec=</varname></term>
<listitem><para>Configures the time to sleep before restarting
a service (as configured with <varname>Restart=</varname>).
Takes a unit-less value in seconds, or a time span value such
as "5min 20s". Defaults to 100ms.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>RestartSteps=</varname></term>
<listitem><para>Configures the number of exponential steps to take to increase the interval
of auto-restarts from <varname>RestartSec=</varname> to <varname>RestartMaxDelaySec=</varname>.
Takes a positive integer or 0 to disable it. Defaults to 0. <emphasis>Hint:</emphasis> values
between 3 and 5 are good choices when exponential backoff is desired.</para>
<para>Example:</para>
<programlisting>RestartSec=10s
RestartSteps=4
RestartMaxDelaySec=160s</programlisting>
<para>This will produce the following restart intervals: 10s, 20s, 40s, 80s, 160s, 160s, 160s, etc.
Notice the geometric interpolation and the resulting constant ratio between intervals; here it is 2.
The formula for the <emphasis>ratio</emphasis> is
<inlineequation>
<mathphrase>
(<varname>RestartMaxDelaySec</varname> / <varname>RestartSec</varname>)^(1 / <varname>RestartSteps</varname>)
</mathphrase>
</inlineequation>. A (repeating) delay equal to <varname>RestartMaxDelaySec=</varname> is always
reached after
<inlineequation>
<mathphrase>
<varname>RestartSteps</varname> + 1
</mathphrase>
</inlineequation> steps.</para>
<para>The total wait until the first restart at <varname>RestartMaxDelaySec=</varname> is
<inlineequation>
<mathphrase>
(<varname>RestartMaxDelaySec</varname> * <emphasis>ratio</emphasis> - <varname>RestartSec</varname>) / (<emphasis>ratio</emphasis> - 1)
</mathphrase>
</inlineequation>, or 310s in the example above. This excludes the time each start, run, and stop
takes, and any delay added by <varname>RestartRandomizedDelaySec=</varname>.</para>
<para>Use <command>systemd-analyze restart-delays</command> to show the restart delays and their
cumulative total, and check whether the start rate limit rejects a restart. See
<citerefentry><refentrytitle>systemd-analyze</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para>
<para>Restarts stop when the start rate limit is hit, see
<varname>StartLimitIntervalSec=</varname> and <varname>StartLimitBurst=</varname> in
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
The defaults come from <varname>DefaultStartLimitIntervalSec=</varname> and
<varname>DefaultStartLimitBurst=</varname> in
<citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
With the built-in defaults of 5 starts in 10s, the example restarts indefinitely.</para>
<para>The start limit example below assumes that the restart counter and start rate limit are reset
before the first start, for example by <command>systemctl reset-failed</command>. Earlier starts in
the current rate limit interval may cause an earlier failure. If the interval expires during the
restart sequence, the service may restart indefinitely. A successful restart does not reset the
restart counter. After starting, the service can reset the restart counter with
<literal>RESTART_RESET=1</literal>, see
<citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para>
<para>To make the unit fail once the delay reaches <varname>RestartMaxDelaySec=</varname>, set
<varname>StartLimitBurst=</varname> to <varname>RestartSteps</varname> + 1, and set
<varname>StartLimitIntervalSec=</varname> to more than the total plus the time the service takes to
start, run, and stop each time. For the example above:</para>
<programlisting>[Unit]
StartLimitIntervalSec=10min
StartLimitBurst=5</programlisting>
<para>This setting is effective only if <varname>RestartMaxDelaySec=</varname> is also set and
<varname>RestartSec=</varname> is not zero.</para>
<xi:include href="version-info.xml" xpointer="v254"/></listitem>
</varlistentry>
<varlistentry>
<term><varname>RestartMaxDelaySec=</varname></term>
<listitem><para>Configures the longest time to sleep before restarting a service
as the interval goes up with <varname>RestartSteps=</varname>. Takes a value
in the same format as <varname>RestartSec=</varname>, or <literal>infinity</literal>
to disable the setting. Defaults to <literal>infinity</literal>.</para>
<para>This setting is effective only if <varname>RestartSteps=</varname> is also set and
<varname>RestartSec=</varname> is not zero.</para>
<xi:include href="version-info.xml" xpointer="v254"/></listitem>
</varlistentry>
<varlistentry>
<term><varname>RestartRandomizedDelaySec=</varname></term>
<listitem><para>Delay automatic restarts by a randomly selected, evenly distributed amount of time
between 0 and the specified time value, added on top of the delay otherwise configured via
<varname>RestartSec=</varname> (and <varname>RestartSteps=</varname>/<varname>RestartMaxDelaySec=</varname>,
if used). Takes a value in the same format as <varname>RestartSec=</varname>. Defaults to 0, indicating
that no randomized delay shall be applied.</para>
<para>This setting is useful to stretch out the restarts of similarly configured service instances that
fail at the same time, to prevent them from restarting simultaneously and possibly resulting in
resource congestion. It is the restart-side analogue of <varname>RandomizedDelaySec=</varname> in
<citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
<xi:include href="version-info.xml" xpointer="v262"/></listitem>
</varlistentry>
<varlistentry>
<term><varname>TimeoutStartSec=</varname></term>
<listitem><para>Configures the time to wait for start-up. If a daemon service does not signal
start-up completion within the configured time, the service will be considered failed and will be
shut down again. The precise action depends on the <varname>TimeoutStartFailureMode=</varname>
option. Takes a unit-less value in seconds, or a time span value such as "5min 20s". Pass
<literal>infinity</literal> to disable the timeout logic. Defaults to
<varname>DefaultTimeoutStartSec=</varname> set in the manager, except when
<varname>Type=oneshot</varname> is used, in which case the timeout is disabled by default (see
<citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
</para>
<para>If a service of <varname>Type=notify</varname>/<varname>Type=notify-reload</varname> sends
<literal>EXTEND_TIMEOUT_USEC=…</literal>, this may cause the start time to be extended beyond
<varname>TimeoutStartSec=</varname>. The first receipt of this message must occur before
<varname>TimeoutStartSec=</varname> is exceeded, and once the start time has extended beyond
<varname>TimeoutStartSec=</varname>, the service manager will allow the service to continue to start,
provided the service repeats <literal>EXTEND_TIMEOUT_USEC=…</literal> within the interval specified
until the service startup status is finished by <literal>READY=1</literal>. (see
<citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>).
</para>
<para>Note that the start timeout is also applied to service reloads, regardless of whether implemented
through <varname>ExecReload=</varname> or via the reload logic enabled via <varname>Type=notify-reload</varname>.
If the reload does not complete within the configured time, the reload will be considered failed and
the service will continue running with the old configuration. This will not affect the running service,
but will be logged and will cause e.g. <command>systemctl reload</command> to fail.</para>
<xi:include href="version-info.xml" xpointer="v188"/></listitem>
</varlistentry>
<varlistentry>
<term><varname>TimeoutStopSec=</varname></term>
<listitem><para>This option serves two purposes. First, it configures the time to wait for each
<varname>ExecStop=</varname> command. If any of them times out, subsequent <varname>ExecStop=</varname> commands
are skipped and the service will be terminated by <constant>SIGTERM</constant>. If no <varname>ExecStop=</varname>
commands are specified, the service gets the <constant>SIGTERM</constant> immediately. This default behavior
can be changed by the <varname>TimeoutStopFailureMode=</varname> option. Second, it configures the time
to wait for the service itself to stop. If it does not terminate in the specified time, it will be forcibly terminated
by <constant>SIGKILL</constant> (see <varname>KillMode=</varname> in
<citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
Takes a unit-less value in seconds, or a time span value such
as "5min 20s". Pass <literal>infinity</literal> to disable the
timeout logic. Defaults to
<varname>DefaultTimeoutStopSec=</varname> from the manager
configuration file (see
<citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
</para>
<para>If a service of <varname>Type=notify</varname>/<varname>Type=notify-reload</varname> sends
<literal>EXTEND_TIMEOUT_USEC=…</literal>, this may cause the stop time to be extended beyond
<varname>TimeoutStopSec=</varname>. The first receipt of this message must occur before
<varname>TimeoutStopSec=</varname> is exceeded, and once the stop time has extended beyond
<varname>TimeoutStopSec=</varname>, the service manager will allow the service to continue to stop,
provided the service repeats <literal>EXTEND_TIMEOUT_USEC=…</literal> within the interval specified,
or terminates itself (see
<citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>).
</para>
<xi:include href="version-info.xml" xpointer="v188"/></listitem>
</varlistentry>
<varlistentry>
<term><varname>TimeoutAbortSec=</varname></term>
<listitem><para>This option configures the time to wait for the service to terminate when it was aborted due to a
watchdog timeout (see <varname>WatchdogSec=</varname>). If the service has a short <varname>TimeoutStopSec=</varname>
this option can be used to give the system more time to write a core dump of the service. Upon expiration the service
will be forcibly terminated by <constant>SIGKILL</constant> (see <varname>KillMode=</varname> in
<citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>). The core file will
be truncated in this case. Use <varname>TimeoutAbortSec=</varname> to set a sensible timeout for the core dumping per
service that is large enough to write all expected data while also being short enough to handle the service failure
in due time.
</para>
<para>Takes a unit-less value in seconds, or a time span value such as "5min 20s". Pass an empty value to skip
the dedicated watchdog abort timeout handling and fall back <varname>TimeoutStopSec=</varname>. Pass
<literal>infinity</literal> to disable the timeout logic. Defaults to <varname>DefaultTimeoutAbortSec=</varname> from
the manager configuration file (see
<citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
</para>
<para>If a service of <varname>Type=notify</varname>/<varname>Type=notify-reload</varname> handles
<constant>SIGABRT</constant> itself (instead of relying on the kernel to write a core dump) it can
send <literal>EXTEND_TIMEOUT_USEC=…</literal> to extended the abort time beyond
<varname>TimeoutAbortSec=</varname>. The first receipt of this message must occur before
<varname>TimeoutAbortSec=</varname> is exceeded, and once the abort time has extended beyond
<varname>TimeoutAbortSec=</varname>, the service manager will allow the service to continue to abort,
provided the service repeats <literal>EXTEND_TIMEOUT_USEC=…</literal> within the interval specified,
or terminates itself (see
<citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>).
</para>
<xi:include href="version-info.xml" xpointer="v243"/></listitem>
</varlistentry>
<varlistentry>
<term><varname>TimeoutSec=</varname></term>
<listitem><para>A shorthand for configuring both
<varname>TimeoutStartSec=</varname> and
<varname>TimeoutStopSec=</varname> to the specified value.
</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>TimeoutStartFailureMode=</varname></term>
<term><varname>TimeoutStopFailureMode=</varname></term>
<listitem><para>These options configure the action that is taken in case a daemon service does not signal
start-up within its configured <varname>TimeoutStartSec=</varname>, respectively if it does not stop within
<varname>TimeoutStopSec=</varname>. Takes one of <option>terminate</option>, <option>abort</option> and
<option>kill</option>. Both options default to <option>terminate</option>.</para>
<para>If <option>terminate</option> is set the service will be gracefully terminated by sending the signal
specified in <varname>KillSignal=</varname> (defaults to <constant>SIGTERM</constant>, see
<citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>). If the
service does not terminate the <varname>FinalKillSignal=</varname> is sent after
<varname>TimeoutStopSec=</varname>. If <option>abort</option> is set, <varname>WatchdogSignal=</varname> is sent
instead and <varname>TimeoutAbortSec=</varname> applies before sending <varname>FinalKillSignal=</varname>.
This setting may be used to analyze services that fail to start-up or shut-down intermittently.
By using <option>kill</option> the service is immediately terminated by sending
<varname>FinalKillSignal=</varname> without any further timeout. This setting can be used to expedite the
shutdown of failing services.
</para>
<xi:include href="version-info.xml" xpointer="v246"/></listitem>
</varlistentry>
<varlistentry>
<term><varname>RuntimeMaxSec=</varname></term>
<listitem><para>Configures a maximum time for the service to run. If this is used and the service has been
active for longer than the specified time it is terminated and put into a failure state. Note that this setting
does not have any effect on <varname>Type=oneshot</varname> services, as they terminate immediately after
activation completed (use <varname>TimeoutStartSec=</varname> to limit their activation).
Pass <literal>infinity</literal> (the default) to configure no runtime limit.</para>
<para>If a service of <varname>Type=notify</varname>/<varname>Type=notify-reload</varname> sends
<literal>EXTEND_TIMEOUT_USEC=…</literal>, this may cause the runtime to be extended beyond
<varname>RuntimeMaxSec=</varname>. The first receipt of this message must occur before
<varname>RuntimeMaxSec=</varname> is exceeded, and once the runtime has extended beyond
<varname>RuntimeMaxSec=</varname>, the service manager will allow the service to continue to run,
provided the service repeats <literal>EXTEND_TIMEOUT_USEC=…</literal> within the interval specified
until the service shutdown is achieved by <literal>STOPPING=1</literal> (or termination). (see
<citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>).
</para>
<xi:include href="version-info.xml" xpointer="v229"/></listitem>
</varlistentry>
<varlistentry>
<term><varname>RuntimeRandomizedExtraSec=</varname></term>
<listitem><para>This option modifies <varname>RuntimeMaxSec=</varname> by increasing the maximum runtime by an
evenly distributed duration between 0 and the specified value (in seconds). If <varname>RuntimeMaxSec=</varname> is
unspecified, then this feature will be disabled.
</para>
<xi:include href="version-info.xml" xpointer="v250"/></listitem>
</varlistentry>
<varlistentry>
<term><varname>WatchdogSec=</varname></term>
<listitem><para>Configures the watchdog timeout for a service.
The watchdog is activated when the start-up is completed. The
service must call
<citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>
regularly with <literal>WATCHDOG=1</literal> (i.e. the
"keep-alive ping"). If the time between two such calls is
larger than the configured time, then the service is placed in
a failed state and it will be terminated with
<constant>SIGABRT</constant> (or the signal specified by
<varname>WatchdogSignal=</varname>). By setting
<varname>Restart=</varname> to <option>on-failure</option>,
<option>on-watchdog</option>, <option>on-abnormal</option> or
<option>always</option>, the service will be automatically
restarted. The time configured here will be passed to the
executed service process in the
<varname>WATCHDOG_USEC=</varname> environment variable. This
allows daemons to automatically enable the keep-alive pinging
logic if watchdog support is enabled for the service. If this
option is used, <varname>NotifyAccess=</varname> (see below)
should be set to open access to the notification socket
provided by systemd. If <varname>NotifyAccess=</varname> is
not set, it will be implicitly set to <option>main</option>.
Defaults to 0, which disables this feature. The service can
check whether the service manager expects watchdog keep-alive
notifications. See
<citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>
for details.
<citerefentry><refentrytitle>sd_event_set_watchdog</refentrytitle><manvolnum>3</manvolnum></citerefentry>
may be used to enable automatic watchdog notification support.
</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>Restart=</varname></term>
<listitem><para>Configures whether the service shall be restarted when the service process exits,
is killed, or a timeout is reached. The service process may be the main service process, but it may
also be one of the processes specified with <varname>ExecStartPre=</varname>,
<varname>ExecStartPost=</varname>, <varname>ExecStop=</varname>, <varname>ExecStopPost=</varname>,
or <varname>ExecReload=</varname>. When the death of the process is a result of systemd operation
(e.g. service stop or restart), the service will not be restarted. Timeouts include missing the watchdog
"keep-alive ping" deadline and a service start, reload, and stop operation timeouts.</para>
<para>Takes one of <option>no</option>, <option>on-success</option>, <option>on-failure</option>,
<option>on-abnormal</option>, <option>on-watchdog</option>, <option>on-abort</option>, or
<option>always</option>. If set to <option>no</option> (the default), the service will not be restarted.
If set to <option>on-success</option>, it will be restarted only when the service process exits cleanly.
In this context, a clean exit means any of the following:
<itemizedlist>
<listitem><simpara>exit code of 0;</simpara></listitem>
<listitem><simpara>for types other than <varname>Type=oneshot</varname>, one of the signals
<constant>SIGHUP</constant>, <constant>SIGINT</constant>,
<constant>SIGTERM</constant>, or <constant>SIGPIPE</constant>;
</simpara></listitem>
<listitem><simpara>exit statuses and signals specified in
<varname>SuccessExitStatus=</varname>.</simpara></listitem>
</itemizedlist>
If set to <option>on-failure</option>, the service will be restarted when the process exits with
a non-zero exit code, is terminated by a signal (including on core dump, but excluding the aforementioned
four signals), when an operation (such as service reload) times out, and when the configured watchdog
timeout is triggered. If set to <option>on-abnormal</option>, the service will be restarted when
the process is terminated by a signal (including on core dump, excluding the aforementioned four signals),
when an operation times out, or when the watchdog timeout is triggered. If set to <option>on-abort</option>,
the service will be restarted only if the service process exits due to an uncaught signal not specified
as a clean exit status. If set to <option>on-watchdog</option>, the service will be restarted
only if the watchdog timeout for the service expires. If set to <option>always</option>, the service
will be restarted regardless of whether it exited cleanly or not, got terminated abnormally by
a signal, or hit a timeout. Note that <varname>Type=oneshot</varname> services will never be restarted
on a clean exit status, i.e. <option>always</option> and <option>on-success</option> are rejected
for them.</para>
<table>
<title>Exit causes and the effect of the <varname>Restart=</varname> settings</title>
<tgroup cols='2'>
<colspec colname='path' />
<colspec colname='expl' />
<thead>
<row>
<entry>Restart settings/Exit causes</entry>
<entry><option>no</option></entry>
<entry><option>always</option></entry>
<entry><option>on-success</option></entry>
<entry><option>on-failure</option></entry>
<entry><option>on-abnormal</option></entry>
<entry><option>on-abort</option></entry>
<entry><option>on-watchdog</option></entry>
</row>
</thead>
<tbody>
<row>
<entry>Clean exit code or signal</entry>
<entry/>
<entry>X</entry>
<entry>X</entry>
<entry/>
<entry/>
<entry/>
<entry/>
</row>
<row>
<entry>Unclean exit code</entry>
<entry/>
<entry>X</entry>
<entry/>
<entry>X</entry>
<entry/>
<entry/>
<entry/>
</row>
<row>
<entry>Unclean signal</entry>
<entry/>
<entry>X</entry>
<entry/>
<entry>X</entry>
<entry>X</entry>
<entry>X</entry>
<entry/>
</row>
<row>
<entry>Timeout</entry>