HALF ECHO LEARN / REFERENCE COLLECTION

v262.2

man/systemd.unit.xml

165,445 bytesGit mode 100644Download original fileLGPL-2.1-or-later

Git blob: 54d24961893748d6aa56d22aa57bf37d61254735

Lines 1–1000 of 2,862

<?xml version='1.0'?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
<!ENTITY % entities SYSTEM "custom-entities.ent" >
%entities;
]>
<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
 
<refentry id="systemd.unit"
          xmlns:xi="http://www.w3.org/2001/XInclude">
 
  <refentryinfo>
    <title>systemd.unit</title>
    <productname>systemd</productname>
  </refentryinfo>
 
  <refmeta>
    <refentrytitle>systemd.unit</refentrytitle>
    <manvolnum>5</manvolnum>
  </refmeta>
 
  <refnamediv>
    <refname>systemd.unit</refname>
    <refpurpose>Unit configuration</refpurpose>
  </refnamediv>
 
  <refsynopsisdiv>
    <para><simplelist type="inline">
      <member><filename><replaceable>service</replaceable>.service</filename></member>
      <member><filename><replaceable>socket</replaceable>.socket</filename></member>
      <member><filename><replaceable>device</replaceable>.device</filename></member>
      <member><filename><replaceable>mount</replaceable>.mount</filename></member>
      <member><filename><replaceable>automount</replaceable>.automount</filename></member>
      <member><filename><replaceable>swap</replaceable>.swap</filename></member>
      <member><filename><replaceable>target</replaceable>.target</filename></member>
      <member><filename><replaceable>path</replaceable>.path</filename></member>
      <member><filename><replaceable>timer</replaceable>.timer</filename></member>
      <member><filename><replaceable>slice</replaceable>.slice</filename></member>
      <member><filename><replaceable>scope</replaceable>.scope</filename></member>
    </simplelist></para>
 
    <refsect2>
      <title>System Unit Search Path</title>
 
      <para><simplelist>
        <member><filename>/etc/systemd/system.control/*</filename></member>
        <member><filename>/run/systemd/system.control/*</filename></member>
        <member><filename>/run/systemd/transient/*</filename></member>
        <member><filename>/run/systemd/generator.early/*</filename></member>
        <member><filename>/etc/systemd/system/*</filename></member>
        <member><filename>/etc/systemd/system.attached/*</filename></member>
        <member><filename>/run/systemd/system/*</filename></member>
        <member><filename>/run/systemd/system.attached/*</filename></member>
        <member><filename>/run/systemd/generator/*</filename></member>
        <member><filename index='false'>…</filename></member>
        <member><filename>/usr/local/lib/systemd/system/*</filename></member>
        <member><filename>/usr/lib/systemd/system/*</filename></member>
        <member><filename>/run/systemd/generator.late/*</filename></member>
      </simplelist></para>
    </refsect2>
 
    <refsect2>
      <title>User Unit Search Path</title>
      <para><simplelist>
        <member><filename>~/.config/systemd/user.control/*</filename></member>
        <member><filename>$XDG_RUNTIME_DIR/systemd/user.control/*</filename></member>
        <member><filename>$XDG_RUNTIME_DIR/systemd/transient/*</filename></member>
        <member><filename>$XDG_RUNTIME_DIR/systemd/generator.early/*</filename></member>
        <member><filename>~/.config/systemd/user/*</filename></member>
        <member><filename>$XDG_CONFIG_DIRS/systemd/user/*</filename></member>
        <member><filename>/etc/systemd/user/*</filename></member>
        <member><filename>$XDG_RUNTIME_DIR/systemd/user/*</filename></member>
        <member><filename>/run/systemd/user/*</filename></member>
        <member><filename>$XDG_RUNTIME_DIR/systemd/generator/*</filename></member>
        <member><filename>$XDG_DATA_HOME/systemd/user/*</filename></member>
        <member><filename>$XDG_DATA_DIRS/systemd/user/*</filename></member>
        <member><filename index='false'>…</filename></member>
        <member><filename>/usr/local/lib/systemd/user/*</filename></member>
        <member><filename>/usr/lib/systemd/user/*</filename></member>
        <member><filename>$XDG_RUNTIME_DIR/systemd/generator.late/*</filename></member>
      </simplelist></para>
    </refsect2>
 
  </refsynopsisdiv>
 
  <refsect1>
    <title>Description</title>
 
    <para>A unit file is a plain text ini-style file that encodes information about a service, a
    socket, a device, a mount point, an automount point, a swap file or partition, a start-up
    target, a watched file system path, a timer controlled and supervised by
    <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, a
    resource management slice or a group of externally created processes. See
    <citerefentry><refentrytitle>systemd.syntax</refentrytitle><manvolnum>7</manvolnum></citerefentry>
    for a general description of the syntax.</para>
 
    <para>This man page lists the common configuration options of all
    the unit types. These options need to be configured in the [Unit]
    or [Install] sections of the unit files.</para>
 
    <para>In addition to the generic [Unit] and [Install] sections
    described here, each unit may have a type-specific section, e.g.
    [Service] for a service unit. See the respective man pages for
    more information:
    <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
    <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
    <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
    <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
    <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
    <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
    <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
    <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
    <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
    <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
    <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
    </para>
 
    <para>Unit files are loaded from a set of paths determined during compilation, described in the next
    section.</para>
 
    <para>Valid unit names consist of a "unit name prefix", and a suffix specifying the unit type which
    begins with a dot. The "unit name prefix" must consist of one or more valid characters (ASCII letters,
    digits, <literal>:</literal>, <literal>-</literal>, <literal>_</literal>, <literal>.</literal>, and
    <literal>\</literal>). The total length of the unit name including the suffix must not exceed 255
    characters. The unit type suffix must be one of <literal>.service</literal>, <literal>.socket</literal>,
    <literal>.device</literal>, <literal>.mount</literal>, <literal>.automount</literal>,
    <literal>.swap</literal>, <literal>.target</literal>, <literal>.path</literal>,
    <literal>.timer</literal>, <literal>.slice</literal>, or <literal>.scope</literal>.</para>
 
    <para>Unit names can be parameterized by a single argument called the "instance name". The unit is then
    constructed based on a "template file" which serves as the definition of multiple services or other
    units. A template unit must have a single <literal>@</literal> at the end of the unit name prefix (right
    before the type suffix). The name of the full unit is formed by inserting the instance name between
    <literal>@</literal> and the unit type suffix. In the unit file itself, the instance parameter may be
    referred to using <literal>%i</literal> and other specifiers, see below.</para>
 
    <para>Unit files may contain additional options on top of those listed here. If systemd encounters an
    unknown option, it will write a warning log message but continue loading the unit. If an option or
    section name is prefixed with <option>X-</option>, it is ignored completely by systemd. Options within an
    ignored section do not need the prefix. Applications may use this to include additional information in
    the unit files. To access those options, applications need to parse the unit files on their own.</para>
 
    <para>Units can be aliased (have an alternative name), by creating a symlink from the new name to the
    existing name in one of the unit search paths. For example, <filename>systemd-networkd.service</filename>
    has the alias <filename>dbus-org.freedesktop.network1.service</filename>, created during installation as
    a symlink, so when <command>systemd</command> is asked through D-Bus to load
    <filename>dbus-org.freedesktop.network1.service</filename>, it'll load
    <filename>systemd-networkd.service</filename>. As another example, <filename>default.target</filename> —
    the default system target started at boot — is commonly aliased to either
    <filename>multi-user.target</filename> or <filename>graphical.target</filename> to select what is started
    by default. Alias names may be used in commands like <command>disable</command>,
    <command>start</command>, <command>stop</command>, <command>status</command>, and similar, and in all
    unit dependency directives, including <varname>Wants=</varname>, <varname>Requires=</varname>,
    <varname>Before=</varname>, <varname>After=</varname>. Aliases cannot be used with the
    <command>preset</command> command.</para>
 
    <para>Aliases obey the following restrictions: a unit of a certain type (<literal>.service</literal>,
    <literal>.socket</literal>, …) can only be aliased by a name with the same type suffix. A plain unit (not
    a template or an instance), may only be aliased by a plain name. A template instance may only be aliased
    by another template instance, and the instance part must be identical. A template may be aliased by
    another template (in which case the alias applies to all instances of the template). As a special case, a
    template instance (e.g. <literal>alias@inst.service</literal>) may be a symlink to different template
    (e.g. <literal>template@inst.service</literal>). In that case, just this specific instance is aliased,
    while other instances of the template (e.g. <literal>alias@foo.service</literal>,
    <literal>alias@bar.service</literal>) are not aliased. Those rules preserve the requirement that the
    instance (if any) is always uniquely defined for a given unit and all its aliases. The target of alias
    symlink must point to a valid unit file location, i.e. the symlink target name must match the symlink
    source name as described, and the destination path must be in one of the unit search paths, see UNIT FILE
    LOAD PATH section below for more details. Note that the target file might not exist, i.e. the symlink may
    be dangling.</para>
 
    <para>Unit files may specify aliases through the <varname>Alias=</varname> directive in the [Install]
    section. When the unit is enabled, symlinks will be created for those names, and removed when the unit is
    disabled. For example, <filename>reboot.target</filename> specifies
    <varname>Alias=ctrl-alt-del.target</varname>, so when enabled, the symlink
    <filename>/etc/systemd/system/ctrl-alt-del.target</filename> pointing to the
    <filename>reboot.target</filename> file will be created, and when
    <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>Del</keycap></keycombo> is invoked,
    <command>systemd</command> will look for <filename>ctrl-alt-del.target</filename>, follow the symlink to
    <filename>reboot.target</filename>, and execute <filename>reboot.service</filename> as part of that target.
    <command>systemd</command> does not look at the [Install] section at all during normal operation, so any
    directives in that section only have an effect through the symlinks created during enablement.</para>
 
    <para>Along with a unit file <filename>foo.service</filename>, the directory
    <filename>foo.service.wants/</filename> may exist. All unit files symlinked from such a directory are
    implicitly added as dependencies of type <varname>Wants=</varname> to the unit. Similar functionality
    exists for <varname>Requires=</varname> type dependencies as well, the directory suffix is
    <filename>.requires/</filename> in this case. This functionality is useful to hook units into the
    start-up of other units, without having to modify their unit files. For details about the semantics of
    <varname>Wants=</varname> and <varname>Requires=</varname>, see below. The preferred way to create
    symlinks in the <filename>.wants/</filename> or <filename>.requires/</filename> directories is by
    specifying the dependency in [Install] section of the target unit, and creating the symlink in the file
    system with the <command>enable</command> or <command>preset</command> commands of
    <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.  The
    target can be a normal unit (either plain or a specific instance of a template unit). In case when the
    source unit is a template, the target can also be a template, in which case the instance will be
    "propagated" to the target unit to form a valid unit instance. The target of symlinks in
    <filename>.wants/</filename> or <filename>.requires/</filename> must thus point to a valid unit file
    location, i.e. the symlink target name must satisfy the described requirements, and the destination path
    must be in one of the unit search paths, see UNIT FILE LOAD PATH section below for more details. Note
    that the target file might not exist, i.e. the symlink may be dangling.</para>
 
    <para>Along with a unit file <filename>foo.service</filename>, a "drop-in" directory
    <filename>foo.service.d/</filename> may exist. All files with the suffix
    <literal>.conf</literal> from this directory will be merged in the alphanumeric order and parsed
    after the main unit file itself has been parsed. This is useful to alter or add configuration
    settings for a unit, without having to modify unit files. Each drop-in file must contain appropriate
    section headers. For instantiated units, this logic will first look for the instance
    <literal>.d/</literal> subdirectory (e.g. <literal>foo@bar.service.d/</literal>) and read its
    <literal>.conf</literal> files, followed by the template <literal>.d/</literal> subdirectory (e.g.
    <literal>foo@.service.d/</literal>) and the <literal>.conf</literal> files there. Moreover, for unit
    names containing dashes (<literal>-</literal>), the set of directories generated by repeatedly
    truncating the unit name after all dashes is searched too. Specifically, for a unit name
    <filename>foo-bar-baz.service</filename> not only the regular drop-in directory
    <filename>foo-bar-baz.service.d/</filename> is searched but also both <filename>foo-bar-.service.d/</filename> and
    <filename>foo-.service.d/</filename>. This is useful for defining common drop-ins for a set of related units, whose
    names begin with a common prefix. This scheme is particularly useful for mount, automount and slice units, whose
    systematic naming structure is built around dashes as component separators. Note that equally named drop-in files
    further down the prefix hierarchy override those further up,
    i.e. <filename>foo-bar-.service.d/10-override.conf</filename> overrides
    <filename>foo-.service.d/10-override.conf</filename>.</para>
 
    <para>In cases of unit aliases (described above), dropins for the aliased name and all aliases are
    loaded. In the example of <filename>default.target</filename> aliasing
    <filename>graphical.target</filename>, <filename>default.target.d/</filename>,
    <filename>default.target.wants/</filename>, <filename>default.target.requires/</filename>,
    <filename>graphical.target.d/</filename>, <filename>graphical.target.wants/</filename>,
    <filename>graphical.target.requires/</filename> would all be read. For templates, dropins for the
    template, any template aliases, the template instance, and all alias instances are read. When just a
    specific template instance is aliased, then the dropins for the target template, the target template
    instance, and the alias template instance are read.</para>
 
    <para>In addition to <filename>/etc/systemd/system</filename>, the drop-in <literal>.d/</literal>
    directories for system services can be placed in <filename>/usr/lib/systemd/system</filename> or
    <filename>/run/systemd/system</filename> directories. Drop-in files in <filename>/etc/</filename>
    take precedence over those in <filename>/run/</filename> which in turn take precedence over those
    in <filename>/usr/lib/</filename>. Drop-in files under any of these directories take precedence
    over unit files wherever located. Multiple drop-in files with different names are applied in
    lexicographic order, regardless of which of the directories they reside in.</para>
 
    <para>Units also support a top-level drop-in with <filename><replaceable>type</replaceable>.d/</filename>,
    where <replaceable>type</replaceable> may be e.g. <literal>service</literal> or <literal>socket</literal>,
    that allows altering or adding to the settings of all corresponding unit files on the system.
    The formatting and precedence of applying drop-in configurations follow what is defined above.
    Files in <filename><replaceable>type</replaceable>.d/</filename> have lower precedence compared
    to files in name-specific override directories. The usual rules apply: multiple drop-in files
    with different names are applied in lexicographic order, regardless of which of the directories
    they reside in, so a file in <filename><replaceable>type</replaceable>.d/</filename> applies
    to a unit only if there are no drop-ins or masks with that name in directories with higher
    precedence. See Examples.</para>
 
    <para>Note that while systemd offers a flexible dependency system
    between units it is recommended to use this functionality only
    sparingly and instead rely on techniques such as bus-based or
    socket-based activation which make dependencies implicit,
    resulting in a both simpler and more flexible system.</para>
 
    <para>As mentioned above, a unit may be instantiated from a template file. This allows creation
    of multiple units from a single configuration file. If systemd looks for a unit configuration
    file, it will first search for the literal unit name in the file system. If that yields no
    success and the unit name contains an <literal>@</literal> character, systemd will look for a
    unit template that shares the same name but with the instance string (i.e. the part between the
    <literal>@</literal> character and the suffix) removed. Example: if a service
    <filename>getty@tty3.service</filename> is requested and no file by that name is found, systemd
    will look for <filename>getty@.service</filename> and instantiate a service from that
    configuration file if it is found.</para>
 
    <para>To refer to the instance string from within the
    configuration file you may use the special <literal>%i</literal>
    specifier in many of the configuration options. See below for
    details.</para>
 
    <para>If a unit file is empty (i.e. has the file size 0) or is
    symlinked to <filename>/dev/null</filename>, its configuration
    will not be loaded and it appears with a load state of
    <literal>masked</literal>, and cannot be activated. Use this as an
    effective way to fully disable a unit, making it impossible to
    start it even manually.</para>
 
    <para>Files (including directories) with names that match certain patterns are
    generally ignored. This includes names that start with a <literal>.</literal> or
    end with a <literal>.ignore</literal>.</para>
 
    <para>When unit aliasing is introduced during reload/reexec (e.g., converting
    <filename>b.service</filename> to a symlink pointing to <filename>a.service</filename>), the running
    state of the canonical unit (<filename>a.service</filename>) is preserved. The old serialized state
    of the now-aliased unit is migrated to a new stub orphaned unit to prevent stale data from
    corrupting the canonical unit's live state. Dependencies referencing the alias name are automatically
    resolved to the canonical unit, and the dependency graph is rebuilt from unit files, ensuring
    consistency. If the now-aliased unit had resources such as running processes, they will now be tracked
    under the new orphaned unit. Once all resources are gone (e.g. all processes have exited) the orphaned
    unit will be garbage collected automatically.</para>
 
    <para>The unit file format is covered by the
    <ulink url="https://systemd.io/PORTABILITY_AND_STABILITY/">Interface
    Portability and Stability Promise</ulink>.</para>
 
  </refsect1>
 
  <refsect1>
    <title>String Escaping for Inclusion in Unit Names</title>
 
    <para>Sometimes it is useful to convert arbitrary strings into unit names. To facilitate this, a method of string
    escaping is used, in order to map strings containing arbitrary byte values (except <constant>NUL</constant>) into
    valid unit names and their restricted character set. A common special case are unit names that reflect paths to
    objects in the file system hierarchy. Example: a device unit <filename>dev-sda.device</filename> refers to a device
    with the device node <filename index="false">/dev/sda</filename> in the file system.</para>
 
    <para>The escaping algorithm operates as follows: given a string, any <literal>/</literal> character is
    replaced by <literal>-</literal>, and all other characters which are not ASCII alphanumerics,
    <literal>:</literal>, <literal>_</literal> or <literal>.</literal> are replaced by C-style
    <literal>\x2d</literal> escapes. In addition, <literal>.</literal> is replaced with such a C-style escape
    when it would appear as the first character in the escaped string.</para>
 
    <para>When the input qualifies as absolute file system path, this algorithm is extended slightly: the path to the
    root directory <literal>/</literal> is encoded as single dash <literal>-</literal>. In addition, any leading,
    trailing or duplicate <literal>/</literal> characters are removed from the string before transformation. Example:
    <filename index="false">/foo//bar/baz/</filename> becomes <literal>foo-bar-baz</literal>.</para>
 
    <para>This escaping is fully reversible, as long as it is known whether the escaped string was a path (the
    unescaping results are different for paths and non-path strings). The
    <citerefentry><refentrytitle>systemd-escape</refentrytitle><manvolnum>1</manvolnum></citerefentry> command may be
    used to apply and reverse escaping on arbitrary strings. Use <command>systemd-escape --path</command> to escape
    path strings, and <command>systemd-escape</command> without <option>--path</option> otherwise.</para>
  </refsect1>
 
  <refsect1>
    <title>Automatic dependencies</title>
 
    <refsect2>
      <title>Implicit Dependencies</title>
 
      <para>A number of unit dependencies are implicitly established, depending on unit type and
      unit configuration. These implicit dependencies can make unit configuration file cleaner. For
      the implicit dependencies in each unit type, please refer to section "Implicit Dependencies"
      in respective man pages.</para>
 
      <para>For example, service units with <varname>Type=dbus</varname> automatically acquire
      dependencies of type <varname>Requires=</varname> and <varname>After=</varname> on
      <filename>dbus.socket</filename>. See
      <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
      for details.</para>
    </refsect2>
 
    <refsect2>
      <title>Default Dependencies</title>
 
      <para>Default dependencies are similar to implicit dependencies, but can be turned on and off
      by setting <varname>DefaultDependencies=</varname> to <varname>yes</varname> (the default) and
      <varname>no</varname>, while implicit dependencies are always in effect. See section "Default
      Dependencies" in respective man pages for the effect of enabling
      <varname>DefaultDependencies=</varname> in each unit types.</para>
 
      <para>For example, target units will complement all configured dependencies of type
      <varname>Wants=</varname> or <varname>Requires=</varname> with dependencies of type
      <varname>After=</varname>. See
      <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>
      for details. Note that this behavior can be opted out by setting
      <varname>DefaultDependencies=no</varname> in the specified units, or it can be selectively
      overridden via an explicit <varname>Before=</varname> dependency.</para>
    </refsect2>
  </refsect1>
 
  <refsect1>
    <title>Unit File Load Path</title>
 
    <para>Unit files are loaded from a set of paths determined during
    compilation, described in the two tables below. Unit files found
    in directories listed earlier override files with the same name in
    directories lower in the list
    <xi:include href="standard-conf.xml" xpointer="usr-local-footnote" />.
    </para>
 
    <para>When the variable <varname>$SYSTEMD_UNIT_PATH</varname> is set,
    the contents of this variable overrides the unit load path. If
    <varname>$SYSTEMD_UNIT_PATH</varname> ends with an empty component
    (<literal>:</literal>), the usual unit load path will be appended
    to the contents of the variable.</para>
 
    <table>
      <title>
        Load path when running in system mode (<option>--system</option>).
      </title>
 
      <tgroup cols='2'>
        <colspec colname='path' />
        <colspec colname='expl' />
        <thead>
          <row>
            <entry>Path</entry>
            <entry>Description</entry>
          </row>
        </thead>
        <tbody>
          <row>
            <entry><filename>/etc/systemd/system.control</filename></entry>
            <entry morerows="1">Persistent and transient configuration created using the dbus API</entry>
          </row>
          <row>
            <entry><filename>/run/systemd/system.control</filename></entry>
          </row>
          <row>
            <entry><filename>/run/systemd/transient</filename></entry>
            <entry>Dynamic configuration for transient units</entry>
          </row>
          <row>
            <entry><filename>/run/systemd/generator.early</filename></entry>
            <entry>Generated units with high priority (see <replaceable>early-dir</replaceable> in <citerefentry
            ><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
          </row>
          <row>
            <entry><filename>/etc/systemd/system</filename></entry>
            <entry>System units created by the administrator</entry>
          </row>
          <row>
            <entry><filename>/run/systemd/system</filename></entry>
            <entry>Runtime units</entry>
          </row>
          <row>
            <entry><filename>/run/systemd/generator</filename></entry>
            <entry>Generated units with medium priority (see <replaceable>normal-dir</replaceable> in <citerefentry
            ><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
          </row>
          <row>
            <entry><filename>/usr/local/lib/systemd/system</filename></entry>
            <entry>System units installed by the administrator</entry>
          </row>
          <row>
            <entry><filename>/usr/lib/systemd/system</filename></entry>
            <entry>System units installed by the distribution package manager</entry>
          </row>
          <row>
            <entry><filename>/run/systemd/generator.late</filename></entry>
            <entry>Generated units with low priority (see <replaceable>late-dir</replaceable> in <citerefentry
            ><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
          </row>
        </tbody>
      </tgroup>
    </table>
 
    <table>
      <title>
        Load path when running in user mode (<option>--user</option>).
      </title>
 
      <tgroup cols='2'>
        <colspec colname='path' />
        <colspec colname='expl' />
        <thead>
          <row>
            <entry>Path</entry>
            <entry>Description</entry>
          </row>
        </thead>
        <tbody>
          <row>
            <entry><filename>$XDG_CONFIG_HOME/systemd/user.control</filename> or <filename
            >~/.config/systemd/user.control</filename></entry>
            <entry morerows="1">Persistent and transient configuration created using the dbus API (<varname>$XDG_CONFIG_HOME</varname> is used if set, <filename>~/.config</filename> otherwise)</entry>
          </row>
          <row>
            <entry><filename>$XDG_RUNTIME_DIR/systemd/user.control</filename></entry>
          </row>
          <row>
            <entry><filename>$XDG_RUNTIME_DIR/systemd/transient</filename></entry>
            <entry>Dynamic configuration for transient units</entry>
          </row>
          <row>
            <entry><filename>$XDG_RUNTIME_DIR/systemd/generator.early</filename></entry>
            <entry>Generated units with high priority (see <replaceable>early-dir</replaceable> in <citerefentry
            ><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
          </row>
          <row>
            <entry><filename>$XDG_CONFIG_HOME/systemd/user</filename> or <filename>$HOME/.config/systemd/user</filename></entry>
            <entry>User configuration (<varname>$XDG_CONFIG_HOME</varname> is used if set, <filename>~/.config</filename> otherwise)</entry>
          </row>
          <row>
            <entry><filename>$XDG_CONFIG_DIRS/systemd/user</filename> or <filename>/etc/xdg/systemd/user</filename></entry>
            <entry>Additional configuration directories as specified by the XDG base directory specification (<varname>$XDG_CONFIG_DIRS</varname> is used if set, <filename>/etc/xdg</filename> otherwise)</entry>
          </row>
          <row>
            <entry><filename>/etc/systemd/user</filename></entry>
            <entry>User units created by the administrator</entry>
          </row>
          <row>
            <entry><filename>$XDG_RUNTIME_DIR/systemd/user</filename></entry>
            <entry>Runtime units (only used when $XDG_RUNTIME_DIR is set)</entry>
          </row>
          <row>
            <entry><filename>/run/systemd/user</filename></entry>
            <entry>Runtime units</entry>
          </row>
          <row>
            <entry><filename>$XDG_RUNTIME_DIR/systemd/generator</filename></entry>
            <entry>Generated units with medium priority (see <replaceable>normal-dir</replaceable> in <citerefentry
            ><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
          </row>
          <row>
            <entry><filename>$XDG_DATA_HOME/systemd/user</filename> or <filename>$HOME/.local/share/systemd/user</filename></entry>
            <entry>Units of packages that have been installed in the home directory (<varname>$XDG_DATA_HOME</varname> is used if set, <filename>~/.local/share</filename> otherwise)</entry>
          </row>
          <row>
            <entry><filename>$XDG_DATA_DIRS/systemd/user</filename> or <filename>/usr/local/share/systemd/user</filename> and <filename>/usr/share/systemd/user</filename></entry>
            <entry>Additional data directories as specified by the XDG base directory specification (<varname>$XDG_DATA_DIRS</varname> is used if set, <filename>/usr/local/share</filename> and <filename>/usr/share</filename> otherwise)</entry>
          </row>
          <row>
            <entry><filename>$dir/systemd/user</filename> for each <varname index="false">$dir</varname> in <varname>$XDG_DATA_DIRS</varname></entry>
            <entry>Additional locations for installed user units, one for each entry in <varname>$XDG_DATA_DIRS</varname></entry>
          </row>
          <row>
            <entry><filename>/usr/local/lib/systemd/user</filename></entry>
            <entry>User units installed by the administrator</entry>
          </row>
          <row>
            <entry><filename>/usr/lib/systemd/user</filename></entry>
            <entry>User units installed by the distribution package manager</entry>
          </row>
          <row>
            <entry><filename>$XDG_RUNTIME_DIR/systemd/generator.late</filename></entry>
            <entry>Generated units with low priority (see <replaceable>late-dir</replaceable> in <citerefentry
            ><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
          </row>
        </tbody>
      </tgroup>
    </table>
 
    <para>The set of load paths for the user manager instance may be augmented or
    changed using various environment variables. And environment variables may in
    turn be set using environment generators, see
    <citerefentry><refentrytitle>systemd.environment-generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.
    In particular, <varname>$XDG_DATA_HOME</varname> and
    <varname>$XDG_DATA_DIRS</varname> may be easily set using
    <citerefentry><refentrytitle>systemd-environment-d-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
    Thus, directories listed here are just the defaults. To see the actual list that
    would be used based on compilation options and current environment use
    <programlisting>systemd-analyze --user unit-paths</programlisting>
    </para>
 
    <para>Moreover, additional units might be loaded into systemd from directories not on the unit load path
    by creating a symlink pointing to a unit file in the directories. You can use <command>systemctl
    link</command> for this; see
    <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. The file
    system where the linked unit files are located must be accessible when systemd is started (e.g. anything
    underneath <filename>/home/</filename> or <filename>/var/</filename> is not allowed, unless those
    directories are located on the root file system).</para>
 
    <para>It is important to distinguish "linked unit files" from "unit file aliases": any symlink where the
    symlink <emphasis>target</emphasis> is within the unit load path becomes an alias: the source name and
    the target file name must satisfy specific constraints listed above in the discussion of aliases, but the
    symlink target does not have to exist, and in fact the symlink target path is not used, except to check
    whether the target is within the unit load path. In contrast, a symlink which goes outside of the unit
    load path signifies a linked unit file. The symlink is followed when loading the file, but the
    destination name is otherwise unused (and may even not be a valid unit file name). For example, symlinks
    <filename index='false'>/etc/systemd/system/alias1.service</filename> → <filename index='false'>service1.service</filename>,
    <filename index='false'>/etc/systemd/system/alias2.service</filename> → <filename index='false'>/usr/lib/systemd/service1.service</filename>,
    <filename index='false'>/etc/systemd/system/alias3.service</filename> → <filename index='false'>/etc/systemd/system/service1.service</filename>
    are all valid aliases and <filename index='false'>service1.service</filename> will have
    four names, even if the unit file is located at
    <filename index='false'>/run/systemd/system/service1.service</filename>. In contrast,
    a symlink <filename index='false'>/etc/systemd/system/link1.service</filename> → <filename index='false'>../link1_service_file</filename>
    means that <filename index='false'>link1.service</filename> is a "linked unit" and the contents of
    <filename index='false'>/etc/systemd/link1_service_file</filename> provide its configuration.</para>
  </refsect1>
 
  <refsect1>
    <title>Unit Garbage Collection</title>
 
    <para>The system and service manager loads a unit's configuration automatically when a unit is referenced for the
    first time. It will automatically unload the unit configuration and state again when the unit is not needed anymore
    ("garbage collection"). A unit may be referenced through a number of different mechanisms:</para>
 
    <orderedlist>
      <listitem><para>Another loaded unit references it with a dependency such as <varname>After=</varname>,
      <varname>Wants=</varname>, …</para></listitem>
 
      <listitem><para>The unit is currently starting, running, reloading or stopping.</para></listitem>
 
      <listitem><para>The unit is currently in the <constant>failed</constant> state. (But see below.)</para></listitem>
 
      <listitem><para>A job for the unit is pending.</para></listitem>
 
      <listitem><para>The unit is pinned by an active IPC client program.</para></listitem>
 
      <listitem><para>The unit is a special "perpetual" unit that is always active and loaded. Examples for perpetual
      units are the root mount unit <filename>-.mount</filename> or the scope unit <filename>init.scope</filename> that
      the service manager itself lives in.</para></listitem>
 
      <listitem><para>The unit has running processes associated with it.</para></listitem>
    </orderedlist>
 
    <para>The garbage collection logic may be altered with the <varname>CollectMode=</varname> option, which allows
    configuration whether automatic unloading of units that are in <constant>failed</constant> state is permissible,
    see below.</para>
 
    <para>Note that when a unit's configuration and state is unloaded, all execution results, such as exit codes, exit
    signals, resource consumption and other statistics are lost, except for what is stored in the log subsystem.</para>
 
    <para>Use <command>systemctl daemon-reload</command> or an equivalent command to reload unit configuration while
    the unit is already loaded. In this case, all configuration settings are flushed out and replaced with the new
    configuration (which however might not be in effect immediately), however all runtime state is
    saved/restored.</para>
  </refsect1>
 
  <refsect1>
    <title>[Unit] Section Options</title>
 
    <para>The unit file may include a [Unit] section, which carries
    generic information about the unit that is not dependent on the
    type of unit:</para>
 
    <variablelist class='unit-directives'>
      <varlistentry>
        <term><varname>Description=</varname></term>
        <listitem><para>A brief, meaningful, human-readable text identifying the unit. This may be used by
        <command>systemd</command> (and suitable UIs) as a user-visible label for the unit, so this string
        should identify the unit rather than just describe it, despite the name. This string also should not
        just repeat the unit name. <literal>Apache HTTP Server</literal> or <literal>Postfix Mail
        Server</literal> are good examples. Bad examples are <literal>high-performance lightweight HTTP
        server</literal> (too generic) or <literal>Apache</literal> (meaningless for people who do not know
        the Apache HTTP server project, duplicates the unit name). <command>systemd</command> may use this
        string as a noun in status messages (<literal>Starting
        <replaceable>Description</replaceable>...</literal>, <literal>Started
        <replaceable>Description</replaceable>.</literal>, <literal>Reached target
        <replaceable>Description</replaceable>.</literal>, <literal>Failed to start
        <replaceable>Description</replaceable>.</literal>), so it should be capitalized, and should not be a
        full sentence, or a phrase with a verb conjugated in the present continuous, or end in a full
        stop. Bad examples include <literal>exiting the container</literal>, <literal>updating the database
        once per day.</literal>, or <literal>OpenSSH server second instance daemon</literal>.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/>
        </listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>Documentation=</varname></term>
        <listitem><para>A space-separated list of URIs referencing
        documentation for this unit or its configuration. Accepted are
        only URIs of the types <literal>http://</literal>,
        <literal>https://</literal>, <literal>file:</literal>,
        <literal>info:</literal>, <literal>man:</literal>. For more
        information about the syntax of these URIs, see <citerefentry
        project='man-pages'><refentrytitle>uri</refentrytitle><manvolnum>7</manvolnum></citerefentry>.
        The URIs should be listed in order of relevance, starting with
        the most relevant. It is a good idea to first reference
        documentation that explains what the unit's purpose is,
        followed by how it is configured, followed by any other
        related documentation. This option may be specified more than
        once, in which case the specified list of URIs is merged. If
        the empty string is assigned to this option, the list is reset
        and all prior assignments will have no
        effect.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>Wants=</varname></term>
 
        <listitem><para>Configures (weak) requirement dependencies on other units. This option may be
        specified more than once or multiple space-separated units may be specified in one option in which
        case dependencies for all listed names will be created. Dependencies of this type may also be
        configured outside of the unit configuration file by adding a symlink to a
        <filename>.wants/</filename> directory accompanying the unit file. For details, see above.</para>
 
        <para>Units listed in this option will be started if the configuring unit is. However, if the listed
        units fail to start or cannot be added to the transaction, this has no impact on the validity of the
        transaction as a whole, and this unit will still be started. This is the recommended way to hook
        the start-up of one unit to the start-up of another unit.</para>
 
        <para>Note that requirement dependencies do not influence the order in which services are started or
        stopped. This has to be configured independently with the <varname>After=</varname> or
        <varname>Before=</varname> options. If unit <filename>foo.service</filename> pulls in unit
        <filename>bar.service</filename> as configured with <varname>Wants=</varname> and no ordering is
        configured with <varname>After=</varname> or <varname>Before=</varname>, then both units will be
        started simultaneously and without any delay between them if <filename>foo.service</filename> is
        activated.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>Requires=</varname></term>
 
        <listitem><para>Similar to <varname>Wants=</varname>, but declares a stronger requirement
        dependency. Dependencies of this type may also be configured by adding a symlink to a
        <filename>.requires/</filename> directory accompanying the unit file.</para>
 
        <para>If this unit gets activated, the units listed will be activated as well. If one of
        the other units fails to activate, and an ordering dependency <varname>After=</varname> on the
        failing unit is set, this unit will not be started. Besides, with or without specifying
        <varname>After=</varname>, this unit will be stopped (or restarted) if one of the other units is
        explicitly stopped (or restarted).</para>
 
        <para>Often, it is a better choice to use <varname>Wants=</varname> instead of
        <varname>Requires=</varname> in order to achieve a system that is more robust when dealing with
        failing services.</para>
 
        <para>Note that this dependency type does not imply that the other unit always has to be in active state when
        this unit is running. Specifically: failing condition checks (such as <varname>ConditionPathExists=</varname>,
        <varname>ConditionPathIsSymbolicLink=</varname>, … — see below) do not cause the start job of a unit with a
        <varname>Requires=</varname> dependency on it to fail. Also, some unit types may deactivate on their own (for
        example, a service process may decide to exit cleanly, or a device may be unplugged by the user), which is not
        propagated to units having a <varname>Requires=</varname> dependency. Use the <varname>BindsTo=</varname>
        dependency type together with <varname>After=</varname> to ensure that a unit may never be in active state
        without a specific other unit also in active state (see below).</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>Requisite=</varname></term>
 
        <listitem><para>Similar to <varname>Requires=</varname>. However, if the units listed here
        are not started already, they will not be started and the starting of this unit will fail
        immediately. <varname>Requisite=</varname> does not imply an ordering dependency, even if
        both units are started in the same transaction. Hence this setting should usually be
        combined with <varname>After=</varname>, to ensure this unit is not started before the other
        unit.</para>
 
        <para>When <varname>Requisite=b.service</varname> is used on
        <filename>a.service</filename>, this dependency will show as
        <varname>RequisiteOf=a.service</varname> in property listing of
        <filename>b.service</filename>. <varname>RequisiteOf=</varname>
        dependency cannot be specified directly.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/>
        </listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>BindsTo=</varname></term>
 
        <listitem><para>Configures requirement dependencies, very similar in style to
        <varname>Requires=</varname>. However, this dependency type is stronger: in addition to the effects of
        <varname>Requires=</varname>, which already stops (or restarts) the configuring unit when a listed unit is
        explicitly stopped (or restarted), it also does so when a listed unit stops unexpectedly (which includes when it
        fails).
        Units can suddenly, unexpectedly enter inactive state for different reasons: the main process of a service unit
        might terminate on its own choice, the backing device of a device unit might be unplugged or the mount point of
        a mount unit might be unmounted without involvement of the system and service manager.</para>
 
        <para>When used in conjunction with <varname>After=</varname> on the same unit the behaviour of
        <varname>BindsTo=</varname> is even stronger. In this case, the unit bound to strictly has to be in active
        state for this unit to also be in active state. This not only means a unit bound to another unit that suddenly
        enters inactive state, but also one that is bound to another unit that gets skipped due to an unmet condition
        check (such as <varname>ConditionPathExists=</varname>, <varname>ConditionPathIsSymbolicLink=</varname>, … —
        see below) will be stopped, should it be running. Hence, in many cases it is best to combine
        <varname>BindsTo=</varname> with <varname>After=</varname>.</para>
 
        <para>When <varname>BindsTo=b.service</varname> is used on
        <filename>a.service</filename>, this dependency will show as
        <varname>BoundBy=a.service</varname> in property listing of
        <filename>b.service</filename>. <varname>BoundBy=</varname>
        dependency cannot be specified directly.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/>
        </listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>PartOf=</varname></term>
 
        <listitem><para>Configures dependencies similar to
        <varname>Requires=</varname>, but limited to stopping and
        restarting of units. When systemd stops or restarts the units
        listed here, the action is propagated to this unit. Note that
        this is a one-way dependency — changes to this unit do not
        affect the listed units.</para>
 
        <para>When <varname>PartOf=b.service</varname> is used on
        <filename>a.service</filename>, this dependency will show as
        <varname>ConsistsOf=a.service</varname> in property listing of
        <filename>b.service</filename>. <varname>ConsistsOf=</varname>
        dependency cannot be specified directly.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/>
        </listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>Upholds=</varname></term>
 
        <listitem><para>Configures dependencies similar to <varname>Wants=</varname>, but as long as this unit
        is up, all units listed in <varname>Upholds=</varname> are started whenever found to be inactive or
        failed, and no job is queued for them. While a <varname>Wants=</varname> dependency on another unit
        has a one-time effect when this units started, a <varname>Upholds=</varname> dependency on it has a
        continuous effect, constantly restarting the unit if necessary. This is an alternative to the
        <varname>Restart=</varname> setting of service units, to ensure they are kept running whatever
        happens. The restart happens without delay, and usual per-unit rate-limit applies.</para>
 
        <para>When <varname>Upholds=b.service</varname> is used on <filename>a.service</filename>, this
        dependency will show as <varname>UpheldBy=a.service</varname> in the property listing of
        <filename>b.service</filename>.</para>
 
        <xi:include href="version-info.xml" xpointer="v249"/>
        </listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>Conflicts=</varname></term>
 
        <listitem><para>A space-separated list of unit names. Configures negative requirement
        dependencies. If a unit has a <varname>Conflicts=</varname> requirement on a set of other units,
        then starting it will stop all of them and starting any of them will stop it.</para>
 
        <para>Note that this setting does not imply an ordering dependency, similarly to the
        <varname>Wants=</varname> and <varname>Requires=</varname> dependencies described above. This means
        that to ensure that the conflicting unit is stopped before the other unit is started, an
        <varname>After=</varname> or <varname>Before=</varname> dependency must be declared. It does not
        matter which of the two ordering dependencies is used, because stop jobs are always ordered before
        start jobs, see the discussion in <varname>Before=</varname>/<varname>After=</varname> below.</para>
 
        <para>If unit A that conflicts with unit B is scheduled to
        be started at the same time as B, the transaction will either
        fail (in case both are required parts of the transaction) or be
        modified to be fixed (in case one or both jobs are not a
        required part of the transaction). In the latter case, the job
        that is not required will be removed, or in case both are
        not required, the unit that conflicts will be started and the
        unit that is conflicted is stopped.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>Before=</varname></term>
        <term><varname>After=</varname></term>
 
        <listitem><para>These two settings expect a space-separated list of unit names. They may be specified
        more than once, in which case dependencies for all listed names are created.</para>
 
        <para>Those two settings configure ordering dependencies between units. If unit
        <filename>foo.service</filename> contains the setting <option>Before=bar.service</option> and both
        units are being started, <filename>bar.service</filename>'s start-up is delayed until
        <filename>foo.service</filename> has finished starting up. <varname>After=</varname> is the inverse
        of <varname>Before=</varname>, i.e. while <varname>Before=</varname> ensures that the configured unit
        is started before the listed unit begins starting up, <varname>After=</varname> ensures the opposite,
        that the listed unit is fully started up before the configured unit is started.</para>
 
        <para>When two units with an ordering dependency between them are shut down, the inverse of the
        start-up order is applied. I.e. if a unit is configured with <varname>After=</varname> on another
        unit, the former is stopped before the latter if both are shut down. Given two units with any
        ordering dependency between them, if one unit is shut down and the other is started up, the shutdown
        is ordered before the start-up. It does not matter if the ordering dependency is
        <varname>After=</varname> or <varname>Before=</varname>, in this case. It also does not matter which
        of the two is shut down, as long as one is shut down and the other is started up; the shutdown is
        ordered before the start-up in all cases. If two units have no ordering dependencies between them,
        they are shut down or started up simultaneously, and no ordering takes place. It depends on the unit
        type when precisely a unit has finished starting up. Most importantly, for service units start-up is
        considered completed for the purpose of <varname>Before=</varname>/<varname>After=</varname> when all
        its configured start-up commands have been invoked and they either failed or reported start-up
        success. Note that this includes <varname>ExecStartPost=</varname> (or
        <varname>ExecStopPost=</varname> for the shutdown case).</para>
 
        <para>Note that those settings are independent of and orthogonal to the requirement dependencies as
        configured by <varname>Requires=</varname>, <varname>Wants=</varname>, <varname>Requisite=</varname>,
        or <varname>BindsTo=</varname>. It is a common pattern to include a unit name in both the
        <varname>After=</varname> and <varname>Wants=</varname> options, in which case the unit listed will
        be started before the unit that is configured with these options.</para>
 
        <para>Note that <varname>Before=</varname> dependencies on device units have no effect and are not
        supported.  Devices generally become available as a result of an external hotplug event, and systemd
        creates the corresponding device unit without delay.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>OnFailure=</varname></term>
 
        <listitem><para>A space-separated list of one or more units that are activated when this unit enters
        the <literal>failed</literal> state.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>OnSuccess=</varname></term>
 
        <listitem><para>A space-separated list of one or more units that are activated when this unit enters
        the <literal>inactive</literal> state.</para>
 
        <xi:include href="version-info.xml" xpointer="v249"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>PropagatesReloadTo=</varname></term>
        <term><varname>ReloadPropagatedFrom=</varname></term>
 
        <listitem><para>A space-separated list of one or more units to which reload requests from this unit
        shall be propagated to, or units from which reload requests shall be propagated to this unit,
        respectively. Issuing a reload request on a unit will automatically also enqueue reload requests on
        all units that are linked to it using these two settings.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>PropagatesStopTo=</varname></term>
        <term><varname>StopPropagatedFrom=</varname></term>
 
        <listitem><para>A space-separated list of one or more units to which stop requests from this unit
        shall be propagated to, or units from which stop requests shall be propagated to this unit,
        respectively. Issuing a stop request on a unit will automatically also enqueue stop requests on all
        units that are linked to it using these two settings.</para>
 
        <xi:include href="version-info.xml" xpointer="v249"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>JoinsNamespaceOf=</varname></term>
 
        <listitem><para>For units that start processes (such as service units), lists one or more other units
        whose network and/or temporary file namespace to join. If this is specified on a unit (say,
        <filename>a.service</filename> has <varname>JoinsNamespaceOf=b.service</varname>), then the inverse
        dependency (<varname>JoinsNamespaceOf=a.service</varname> for b.service) is implied. This only
        applies to unit types which support the <varname>PrivateNetwork=</varname>,
        <varname>NetworkNamespacePath=</varname>, <varname>PrivateIPC=</varname>,
        <varname>IPCNamespacePath=</varname>, and <varname>PrivateTmp=</varname> directives (see
        <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
        details). If a unit that has this setting set is started, its processes will see the same
        <filename>/tmp/</filename>, <filename>/var/tmp/</filename>, IPC namespace and network namespace as
        one listed unit that is started. If multiple listed units are already started and these do not share
        their namespace, then it is not defined which namespace is joined. Note that this setting only has an
        effect if <varname>PrivateNetwork=</varname>/<varname>NetworkNamespacePath=</varname>,
        <varname>PrivateIPC=</varname>/<varname>IPCNamespacePath=</varname> and/or
        <varname>PrivateTmp=</varname> is enabled for both the unit that joins the namespace and the unit
        whose namespace is joined.</para>
 
        <xi:include href="version-info.xml" xpointer="v209"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>RequiresMountsFor=</varname></term>
 
        <listitem><para>Takes a space-separated list of absolute
        paths. Automatically adds dependencies of type
        <varname>Requires=</varname> and <varname>After=</varname> for
        all mount units required to access the specified path.</para>
 
        <para>Mount points marked with <option>noauto</option> are not
        mounted automatically through <filename>local-fs.target</filename>,
        but are still honored for the purposes of this option, i.e. they
        will be pulled in by this unit.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>WantsMountsFor=</varname></term>
 
        <listitem><para>Same as <varname>RequiresMountsFor=</varname>,
        but adds dependencies of type <varname>Wants=</varname> instead
        of <varname>Requires=</varname>.</para>
 
        <xi:include href="version-info.xml" xpointer="v256"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>OnSuccessJobMode=</varname></term>
        <term><varname>OnFailureJobMode=</varname></term>
 
        <listitem><para>Takes a value of
        <literal>fail</literal>,
        <literal>replace</literal>,
        <literal>replace-irreversibly</literal>,
        <literal>isolate</literal>,
        <literal>flush</literal>,
        <literal>ignore-dependencies</literal> or
        <literal>ignore-requirements</literal>.
        <literal>OnFailureJobMode=</literal> defaults to
        <literal>replace</literal>,
        <literal>OnSuccessJobMode=</literal> defaults to
        <literal>fail</literal>. Specifies how the units listed in
        <varname>OnSuccess=</varname>/<varname>OnFailure=</varname> will be enqueued. See
        <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s
        <option>--job-mode=</option> option for details on the
        possible values. If this is set to <literal>isolate</literal>,
        only a single unit may be listed in
        <varname>OnSuccess=</varname>/<varname>OnFailure=</varname>.</para>
 
        <xi:include href="version-info.xml" xpointer="v209"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>IgnoreOnIsolate=</varname></term>
 
        <listitem><para>Takes a boolean argument. If <option>true</option>, this unit will not be stopped
        when isolating another unit. Defaults to <option>false</option> for service, target, socket, timer,
        and path units, and <option>true</option> for slice, scope, device, swap, mount, and automount
        units.</para>
 
        <xi:include href="version-info.xml" xpointer="v201"/></listitem>
      </varlistentry>
 
      <varlistentry>
        <term><varname>StopWhenUnneeded=</varname></term>
 
        <listitem><para>Takes a boolean argument. If
        <option>true</option>, this unit will be stopped when it is no