HALF ECHO LEARN / REFERENCE COLLECTION
v262.2src/login/pam_systemd.c
Git blob: 6b5ee9afbaad6bbf19d693c41ea6f803d7491556
Lines 1001–1992 of 1,992
if (!isempty(c->area) && !filename_is_valid(c->area)) {
sym_pam_syslog(pamh, LOG_WARNING, "Specified area '%s' is not a valid filename, ignoring area request.", c->area);
c->area = NULL;
}
if (isempty(c->class)) {
c->class = streq(c->type, "unspecified") ? "background" : "user";
/* For non-regular users tweak the type a bit:
*
* - Allow root tty logins *before* systemd-user-sessions.service is run, to allow early boot
* logins to debug things.
*
* - Non-graphical sessions shall be invoked without service manager.
*
* (Note that this somewhat replicates the class mangling logic on systemd-logind.service's
* server side to some degree, in case clients allocate a session and don't specify a
* class. This is somewhat redundant, but we need the class set up properly below.)
*
* For regular users also tweak the type a bit: if an area is specified at login time, switch
* to light mode too. (Mostly because at the moment we do no support a per-area service
* manager. Once we do, we should change this.).
*/
switch (user_record_disposition(ur)) {
case USER_INTRINSIC:
case USER_SYSTEM:
case USER_DYNAMIC:
if (streq(c->class, "user"))
c->class = user_record_is_root(ur) ? "user-early" :
(STR_IN_SET(c->type, "x11", "wayland", "mir") ? "user" : "user-light");
else if (streq(c->class, "background"))
c->class = "background-light";
break;
case USER_REGULAR:
if (!isempty(c->area)) {
if (streq(c->class, "user"))
c->class = "user-light";
else if (streq(c->class, "background"))
c->class = "background-light";
}
break;
default:
;
}
pam_debug_syslog(pamh, debug, "Automatically chose session class '%s'.", c->class);
}
if (c->incomplete) {
if (streq(c->class, "user"))
c->class = "user-incomplete";
else
sym_pam_syslog(pamh, LOG_WARNING, "PAM session of class '%s' is incomplete, which is not supported, ignoring.", c->class);
}
c->remote = !isempty(c->remote_host) && !is_localhost(c->remote_host);
}
static bool can_use_varlink(const SessionContext *c) {
/* Since PID 1 currently doesn't do Varlink right now, we cannot directly set properties for the
* scope, for now. */
return !c->memory_max &&
!c->runtime_max_sec &&
!c->tasks_max &&
!c->cpu_weight &&
!c->io_weight;
}
static int register_session(
pam_handle_t *pamh,
SessionContext *c,
UserRecord *ur,
bool debug,
char **ret_seat,
char **ret_type,
char **ret_runtime_dir) {
int r;
assert(pamh);
assert(c);
assert(ur);
assert(ret_seat);
assert(ret_type);
assert(ret_runtime_dir);
/* We don't register session class none with logind */
if (streq(c->class, "none")) {
pam_debug_syslog(pamh, debug, "Skipping logind registration for session class none.");
*ret_seat = *ret_type = *ret_runtime_dir = NULL;
return PAM_SUCCESS;
}
/* Make most of this a NOP on non-logind systems */
if (!logind_running()) {
pam_debug_syslog(pamh, debug, "Skipping logind registration as logind is not running.");
*ret_seat = *ret_type = *ret_runtime_dir = NULL;
return PAM_SUCCESS;
}
pam_debug_syslog(pamh, debug,
"Asking logind to create session: "
"uid="UID_FMT" pid="PID_FMT" service=%s type=%s class=%s desktop=%s seat=%s vtnr=%"PRIu32" tty=%s display=%s remote=%s remote_user=%s remote_host=%s",
ur->uid, getpid_cached(),
strempty(c->service),
c->type, c->class, strempty(c->desktop),
strempty(c->seat), c->vtnr, strempty(c->tty), strempty(c->display),
yes_no(c->remote), strempty(c->remote_user), strempty(c->remote_host));
pam_debug_syslog(pamh, debug,
"Session limits: "
"memory_max=%s tasks_max=%s cpu_weight=%s io_weight=%s runtime_max_sec=%s",
strna(c->memory_max), strna(c->tasks_max), strna(c->cpu_weight), strna(c->io_weight), strna(c->runtime_max_sec));
_cleanup_(sd_bus_message_unrefp) sd_bus_message *reply = NULL; /* the following variables point into this message, hence pin it for longer */
_cleanup_(sd_varlink_unrefp) sd_varlink *vl = NULL; /* similar */
const char *id = NULL, *object_path = NULL, *runtime_path = NULL, *real_seat = NULL;
uint32_t original_uid = UID_INVALID, real_vtnr = 0;
bool done = false;
if (can_use_varlink(c)) {
r = sd_varlink_connect_address(&vl, "/run/systemd/io.systemd.Login");
if (r < 0)
pam_debug_syslog_errno(pamh, debug, r, "Failed to connect to logind via Varlink, falling back to D-Bus: %m");
else {
r = sd_varlink_set_allow_fd_passing_output(vl, true);
if (r < 0)
return pam_syslog_errno(pamh, LOG_ERR, r, "Failed to enable output fd passing on Varlink socket: %m");
r = sd_varlink_set_relative_timeout(vl, LOGIN_SLOW_BUS_CALL_TIMEOUT_USEC);
if (r < 0)
return pam_syslog_errno(pamh, LOG_ERR, r, "Failed to set relative timeout on Varlink socket: %m");
_cleanup_(pidref_done) PidRef pidref = PIDREF_NULL;
r = pidref_set_self(&pidref);
if (r < 0)
return pam_syslog_errno(pamh, LOG_ERR, r, "Failed to acquire PID reference on ourselves: %m");
sd_json_variant *vreply = NULL;
const char *error_id = NULL;
r = sd_varlink_callbo(
vl,
"io.systemd.Login.CreateSession",
&vreply,
&error_id,
SD_JSON_BUILD_PAIR_UNSIGNED("UID", ur->uid),
JSON_BUILD_PAIR_PIDREF("PID", &pidref),
JSON_BUILD_PAIR_STRING_NON_EMPTY("Service", c->service),
JSON_BUILD_PAIR_ENUM("Type", c->type),
JSON_BUILD_PAIR_ENUM("Class", c->class),
JSON_BUILD_PAIR_STRING_NON_EMPTY("Desktop", c->desktop),
JSON_BUILD_PAIR_STRING_NON_EMPTY("Seat", c->seat),
JSON_BUILD_PAIR_UNSIGNED_NON_ZERO("VTNr", c->vtnr),
JSON_BUILD_PAIR_STRING_NON_EMPTY("TTY", c->tty),
JSON_BUILD_PAIR_STRING_NON_EMPTY("Display", c->display),
SD_JSON_BUILD_PAIR_BOOLEAN("Remote", c->remote),
JSON_BUILD_PAIR_STRING_NON_EMPTY("RemoteUser", c->remote_user),
JSON_BUILD_PAIR_STRING_NON_EMPTY("RemoteHost", c->remote_host),
JSON_BUILD_PAIR_CONDITION_STRV(!strv_isempty(c->extra_device_access), "ExtraDeviceAccess", c->extra_device_access));
if (r < 0)
return pam_syslog_errno(pamh, LOG_ERR, r,
"Failed to issue io.systemd.Login.CreateSession varlink call: %m");
if (streq_ptr(error_id, "io.systemd.Login.AlreadySessionMember")) {
/* We are already in a session, don't do anything */
pam_debug_syslog(pamh, debug, "Not creating session: %s", error_id);
*ret_seat = *ret_type= *ret_runtime_dir = NULL;
return PAM_SUCCESS;
}
if (error_id)
return pam_syslog_errno(pamh, LOG_ERR, sd_varlink_error_to_errno(error_id, vreply),
"Varlink call io.systemd.Login.CreateSession failed: %s", error_id);
struct {
const char *id;
const char *runtime_path;
uid_t uid;
const char *seat;
unsigned vtnr;
} p = {
.uid = UID_INVALID,
};
static const sd_json_dispatch_field dispatch_table[] = {
{ "Id", SD_JSON_VARIANT_STRING, sd_json_dispatch_const_string, voffsetof(p, id), SD_JSON_MANDATORY },
{ "RuntimePath", SD_JSON_VARIANT_STRING, json_dispatch_const_path, voffsetof(p, runtime_path), SD_JSON_MANDATORY },
{ "UID", _SD_JSON_VARIANT_TYPE_INVALID, sd_json_dispatch_uid_gid, voffsetof(p, uid), SD_JSON_MANDATORY },
{ "Seat", SD_JSON_VARIANT_STRING, sd_json_dispatch_const_string, voffsetof(p, seat), 0 },
{ "VTNr", _SD_JSON_VARIANT_TYPE_INVALID, sd_json_dispatch_uint, voffsetof(p, vtnr), 0 },
{}
};
r = sd_json_dispatch(vreply, dispatch_table, SD_JSON_ALLOW_EXTENSIONS, &p);
if (r < 0)
return pam_syslog_errno(pamh, LOG_ERR, r, "Failed to parse CreateSession() reply: %m");
id = p.id;
runtime_path = p.runtime_path;
original_uid = p.uid;
real_seat = p.seat;
real_vtnr = p.vtnr;
done = true;
}
}
if (!done) {
/* Let's release the D-Bus connection once we are done here, after all the session might live
* quite a long time, and we are not going to process the bus connection in that time, so
* let's better close before the daemon kicks us off because we are not processing
* anything. */
_cleanup_(pam_bus_data_disconnectp) PamBusData *d = NULL;
_cleanup_(sd_bus_flush_close_unrefp) sd_bus *bus = NULL;
/* Talk to logind over the message bus */
r = pam_acquire_bus_connection(pamh, "pam-systemd", debug, &bus, &d);
if (r != PAM_SUCCESS)
return r;
_cleanup_(sd_bus_message_unrefp) sd_bus_message *m = NULL;
r = create_session_message(
bus,
pamh,
ur,
c,
/* avoid_pidfd= */ false,
&m);
if (r < 0)
return pam_bus_log_create_error(pamh, r);
_cleanup_(sd_bus_error_free) sd_bus_error error = SD_BUS_ERROR_NULL;
r = sd_bus_call(bus, m, LOGIN_SLOW_BUS_CALL_TIMEOUT_USEC, &error, &reply);
if (r < 0 && sd_bus_error_has_name(&error, SD_BUS_ERROR_UNKNOWN_METHOD)) {
sd_bus_error_free(&error);
pam_debug_syslog(pamh, debug,
"CreateSessionWithPIDFD() API is not available, retrying with CreateSession().");
m = sd_bus_message_unref(m);
r = create_session_message(bus,
pamh,
ur,
c,
/* avoid_pidfd= */ true,
&m);
if (r < 0)
return pam_bus_log_create_error(pamh, r);
r = sd_bus_call(bus, m, LOGIN_SLOW_BUS_CALL_TIMEOUT_USEC, &error, &reply);
}
if (r < 0) {
if (sd_bus_error_has_name(&error, BUS_ERROR_SESSION_BUSY)) {
/* We are already in a session, don't do anything */
pam_debug_syslog(pamh, debug,
"Not creating session: %s", bus_error_message(&error, r));
*ret_seat = *ret_type = *ret_runtime_dir = NULL;
return PAM_SUCCESS;
}
sym_pam_syslog(pamh, LOG_ERR, "Failed to create session: %s", bus_error_message(&error, r));
return PAM_SESSION_ERR;
}
int session_fd;
r = sd_bus_message_read(
reply,
"soshusub",
&id,
&object_path,
&runtime_path,
&session_fd,
&original_uid,
&real_seat,
&real_vtnr,
/* existing = */ NULL); /* deprecated in b80120c4cba7d134b5437a58437a23fdf7ab2084 */
if (r < 0)
return pam_bus_log_parse_error(pamh, r);
/* Since v258, logind fully relies on pidfd to monitor the lifetime of the session leader
* process and returns a dummy session_fd (no longer a fifo). However because logind cannot
* be restarted (known long-standing issue), we must still be prepared to receive a fifo fd
* from a running logind older than v258. */
if (sd_is_fifo(session_fd, NULL) > 0) {
_cleanup_close_ int fd = fcntl(session_fd, F_DUPFD_CLOEXEC, 3);
if (fd < 0)
return pam_syslog_errno(pamh, LOG_ERR, errno, "Failed to dup session fd: %m");
r = sym_pam_set_data(pamh, "systemd.session-fd", FD_TO_PTR(fd), NULL);
if (r != PAM_SUCCESS)
return pam_syslog_pam_error(pamh, LOG_ERR, r, "Failed to install session fd: @PAMERR@");
TAKE_FD(fd);
}
}
pam_debug_syslog(pamh, debug,
"Reply from logind: "
"id=%s object_path=%s runtime_path=%s seat=%s vtnr=%u original_uid=%u",
id, strna(object_path), runtime_path, real_seat, real_vtnr, original_uid);
/* Please update manager_default_environment() in core/manager.c accordingly if more session envvars
* shall be added. */
r = update_environment(pamh, "XDG_SESSION_ID", id);
if (r != PAM_SUCCESS)
return r;
/* Most likely we got the session/type/class from environment variables, but might have gotten the data
* somewhere else (for example PAM module parameters). Let's now update the environment variables, so that this
* data is inherited into the session processes, and programs can rely on them to be initialized. */
_cleanup_free_ char *real_type = strdup(c->type); /* make copy because this might point to env block, which we are going to update shortly */
if (!real_type)
return pam_log_oom(pamh);
r = update_environment(pamh, "XDG_SESSION_TYPE", c->type);
if (r != PAM_SUCCESS)
return r;
r = update_environment(pamh, "XDG_SESSION_CLASS", c->class);
if (r != PAM_SUCCESS)
return r;
r = update_environment(pamh, "XDG_SESSION_DESKTOP", c->desktop);
if (r != PAM_SUCCESS)
return r;
_cleanup_free_ char *extra_devices = strv_join(c->extra_device_access, ":");
if (!extra_devices)
return pam_log_oom(pamh);
r = update_environment(pamh, "XDG_SESSION_EXTRA_DEVICE_ACCESS", extra_devices);
if (r != PAM_SUCCESS)
return r;
r = update_environment(pamh, "XDG_SEAT", real_seat);
if (r != PAM_SUCCESS)
return r;
if (real_vtnr > 0) {
char buf[DECIMAL_STR_MAX(real_vtnr)];
xsprintf(buf, "%u", real_vtnr);
r = update_environment(pamh, "XDG_VTNR", buf);
if (r != PAM_SUCCESS)
return r;
}
/* Don't set $XDG_RUNTIME_DIR if the user we now authenticated for does not match the
* original user of the session. We do this in order not to result in privileged apps
* clobbering the runtime directory unnecessarily. */
_cleanup_free_ char *rt = NULL;
if (original_uid == ur->uid && validate_runtime_directory(pamh, runtime_path, ur->uid))
if (strdup_to(&rt, runtime_path) < 0)
return pam_log_oom(pamh);
/* Everything worked, hence let's patch in the data we learned. Since 'real_set' points into the
* D-Bus message, let's copy it and return it as a buffer */
_cleanup_free_ char *rs = NULL;
if (strdup_to(&rs, real_seat) < 0)
return pam_log_oom(pamh);
c->vtnr = real_vtnr;
c->seat = *ret_seat = TAKE_PTR(rs);
c->type = *ret_type = TAKE_PTR(real_type);
*ret_runtime_dir = TAKE_PTR(rt);
return PAM_SUCCESS;
}
static int import_shell_credentials(pam_handle_t *pamh, bool debug) {
static const char *const propagate[] = {
"shell.prompt.prefix", "SHELL_PROMPT_PREFIX",
"shell.prompt.suffix", "SHELL_PROMPT_SUFFIX",
"shell.welcome", "SHELL_WELCOME",
NULL
};
int r;
assert(pamh);
STRV_FOREACH_PAIR(k, v, propagate) {
r = propagate_credential_to_environment(pamh, debug, *k, *v);
if (r != PAM_SUCCESS)
return r;
}
return PAM_SUCCESS;
}
static int mkdir_chown_open_directory(
int parent_fd,
const char *name,
uid_t uid,
gid_t gid,
mode_t mode) {
_cleanup_free_ char *t = NULL;
int r;
assert(parent_fd >= 0);
assert(name);
assert(uid_is_valid(uid));
assert(gid_is_valid(gid));
assert(mode != MODE_INVALID);
for (unsigned attempt = 0;; attempt++) {
_cleanup_close_ int fd = openat(parent_fd, name, O_CLOEXEC|O_DIRECTORY|O_NOFOLLOW);
if (fd >= 0)
return TAKE_FD(fd);
if (errno != ENOENT)
return -errno;
/* Let's create the directory under a temporary name first, since we want to make sure that
* once it appears under the right name it has the right ownership */
r = tempfn_random(name, /* extra= */ NULL, &t);
if (r < 0)
return r;
fd = open_mkdir_at(parent_fd, t, O_CLOEXEC|O_EXCL, 0700); /* Use restrictive mode until ownership is in order */
if (fd < 0)
return fd;
r = RET_NERRNO(fchown(fd, uid, gid));
if (r < 0)
goto fail;
r = RET_NERRNO(fchmod(fd, mode));
if (r < 0)
goto fail;
r = rename_noreplace(parent_fd, t, parent_fd, name);
if (r >= 0)
return TAKE_FD(fd);
if (r != -EEXIST || attempt >= 5)
goto fail;
/* Maybe some other login attempt created the directory at the same time? Let's retry */
(void) unlinkat(parent_fd, t, AT_REMOVEDIR);
t = mfree(t);
}
fail:
(void) unlinkat(parent_fd, ASSERT_PTR(t), AT_REMOVEDIR);
return r;
}
static int make_area_runtime_directory(
pam_handle_t *pamh,
UserRecord *ur,
const char *runtime_directory,
const char *area,
char **ret) {
assert(pamh);
assert(ur);
assert(runtime_directory);
assert(area);
assert(ret);
/* Let's be careful with creating these directories, the runtime directory is owned by the user after all,
* and they might play symlink games with us. */
_cleanup_close_ int fd = open(runtime_directory, O_CLOEXEC|O_PATH|O_DIRECTORY);
if (fd < 0)
return pam_syslog_errno(pamh, LOG_ERR, errno, "Unable to open runtime directory '%s': %m", runtime_directory);
_cleanup_close_ int fd_areas = mkdir_chown_open_directory(fd, "Areas", ur->uid, user_record_gid(ur), 0755);
if (fd_areas < 0)
return pam_syslog_errno(pamh, LOG_ERR, fd_areas, "Unable to create 'Areas' directory below '%s': %m", runtime_directory);
_cleanup_close_ int fd_area = mkdir_chown_open_directory(fd_areas, area, ur->uid, user_record_gid(ur), 0755);
if (fd_area < 0)
return pam_syslog_errno(pamh, LOG_ERR, fd_area, "Unable to create '%s' directory below '%s/Areas': %m", area, runtime_directory);
char *j = path_join(runtime_directory, "Areas", area);
if (!j)
return pam_log_oom(pamh);
*ret = j;
return 0;
}
static int export_legacy_dbus_address(pam_handle_t *pamh, const char *runtime) {
assert(pamh);
assert(runtime);
/* We need to export $DBUS_SESSION_BUS_ADDRESS because various applications will not connect
* correctly to the bus without it. This setting matches what dbus.socket does for the user session
* using 'systemctl --user set-environment'. We want to have the same configuration in processes
* started from the PAM session.
*
* The setting of the address is guarded by the access() check because it is also possible to compile
* dbus without --enable-user-session, in which case this socket is not used, and
* $DBUS_SESSION_BUS_ADDRESS should not be set. An alternative approach would to not do the access()
* check here, and let applications try on their own, by using "unix:path=%s/bus;autolaunch:". But we
* expect the socket to be present by the time we do this check, so we can just as well check once
* here. */
const char *s = strjoina(runtime, "/bus");
if (access(s, F_OK) < 0) {
if (errno != ENOENT)
pam_syslog_errno(pamh, LOG_WARNING, errno, "Failed to check if %s/bus exists, ignoring: %m", runtime);
return PAM_SUCCESS;
}
_cleanup_free_ char *t = NULL;
if (asprintf(&t, DEFAULT_USER_BUS_ADDRESS_FMT, runtime) < 0)
return pam_log_oom(pamh);
return update_environment(pamh, "DBUS_SESSION_BUS_ADDRESS", t);
}
static int setup_runtime_directory(
pam_handle_t *pamh,
UserRecord *ur,
const char *runtime_directory,
const char *area) {
int r;
assert(pamh);
assert(ur);
if (!runtime_directory) {
/* If this is an area switch request, always reset $XDG_RUNTIME_DIR if we got nothing
* to ensure the main runtime dir won't be clobbered. */
if (area)
return update_environment(pamh, "XDG_RUNTIME_DIR", NULL);
return PAM_SUCCESS;
}
/* Also create a per-area subdirectory for $XDG_RUNTIME_DIR, so that each area has their own
* set of runtime services. We follow the same directory structure as for $HOME. Note that we
* do not define any form of automatic clean-up for the per-area subdirs beyond the regular
* clean-up of the whole $XDG_RUNTIME_DIR hierarchy when the user finally logs out. */
_cleanup_free_ char *per_area_runtime_directory = NULL;
if (area) {
r = make_area_runtime_directory(pamh, ur, runtime_directory, area, &per_area_runtime_directory);
if (r != PAM_SUCCESS)
return r;
runtime_directory = per_area_runtime_directory;
}
r = update_environment(pamh, "XDG_RUNTIME_DIR", runtime_directory);
if (r != PAM_SUCCESS)
return r;
return export_legacy_dbus_address(pamh, runtime_directory);
}
static int setup_environment(
pam_handle_t *pamh,
UserRecord *ur,
const char *runtime_directory,
const char *area,
bool debug) {
int r;
assert(pamh);
assert(ur);
const char *h = ASSERT_PTR(user_record_home_directory(ur));
/* If an empty area string is specified, this means an explicit: do not use the area logic, normalize this here */
area = empty_to_null(area);
_cleanup_free_ char *ha = NULL, *area_copy = NULL;
if (area) {
_cleanup_free_ char *j = path_join(h, "Areas", area);
if (!j)
return pam_log_oom(pamh);
_cleanup_close_ int fd = -EBADF;
r = chase(j, /* root= */ NULL, CHASE_MUST_BE_DIRECTORY, &ha, &fd);
if (r < 0) {
/* Log the precise error */
pam_syslog_errno(pamh, LOG_WARNING, r, "Path '%s' of requested user area '%s' is not accessible, reverting to regular home directory: %m", j, area);
/* Also tell the user directly at login, but a bit more vague */
sym_pam_info(pamh, "Path '%s' of requested user area '%s' is not accessible, reverting to regular home directory.", j, area);
area = NULL;
} else {
/* Validate that the target is definitely owned by user */
struct stat st;
if (fstat(fd, &st) < 0)
return pam_syslog_errno(pamh, LOG_ERR, errno, "Unable to fstat() target area directory '%s': %m", ha);
if (st.st_uid != ur->uid) {
sym_pam_syslog(pamh, LOG_ERR, "Path '%s' of requested user area '%s' is not owned by user, reverting to regular home directory.", ha, area);
/* Also tell the user directly at login. */
sym_pam_info(pamh, "Path '%s' of requested user area '%s' is not owned by user, reverting to regular home directory.", ha, area);
area = NULL;
} else {
/* All good, now make a copy of the area string, since we quite likely are
* going to invalidate it (if it points into the environment block), via the
* update_environment() call below */
area_copy = strdup(area);
if (!area_copy)
return pam_log_oom(pamh);
pam_debug_syslog(pamh, debug, "Area '%s' selected, setting $HOME to '%s'.", area, ha);
h = ha;
area = area_copy;
}
}
}
r = update_environment(pamh, "XDG_AREA", area);
if (r != PAM_SUCCESS)
return r;
r = update_environment(pamh, "HOME", h);
if (r != PAM_SUCCESS)
return r;
return setup_runtime_directory(pamh, ur, runtime_directory, area);
}
static int open_osc_context(pam_handle_t *pamh, const char *session_type, UserRecord *ur, bool debug) {
int r;
assert(pamh);
assert(ur);
/* If this is a TTY session, then output the session start OSC sequence */
if (!streq_ptr(session_type, "tty"))
return PAM_SUCCESS;
const char *e = sym_pam_getenv(pamh, "TERM");
if (!e)
e = getenv("TERM");
if (streq_ptr(e, "dumb"))
return PAM_SUCCESS;
/* NB: we output directly to stdout, instead of going via sym_pam_info() or so, because that's too
* high-level for us, as it suffixes the output with a newline, expecting a full blown text message
* as prompt string, not just an ANSI sequence. Note that PAM's conv_misc() actually goes to stdout
* anyway, hence let's do so here too, but only after careful validation. */
if (!isatty_safe(STDOUT_FILENO))
return PAM_SUCCESS;
/* Keep a reference to the TTY we are operating on, so that we can issue the OSC close sequence also
* if the TTY is already closed. We use an O_PATH reference here, rather than a properly opened fd,
* so that we don't delay tty hang-up. */
_cleanup_close_ int tty_opath_fd = fd_reopen(STDOUT_FILENO, O_PATH|O_CLOEXEC);
if (tty_opath_fd < 0)
pam_debug_syslog_errno(pamh, debug, tty_opath_fd, "Failed to pin TTY, ignoring: %m");
else
tty_opath_fd = fd_move_above_stdio(tty_opath_fd);
_cleanup_free_ char *osc = NULL;
sd_id128_t osc_id;
r = osc_context_open_session(
ur->user_name,
sym_pam_getenv(pamh, "XDG_SESSION_ID"),
&osc,
&osc_id);
if (r < 0)
return pam_syslog_errno(pamh, LOG_ERR, r, "Failed to prepare OSC sequence: %m");
r = loop_write(STDOUT_FILENO, osc, SIZE_MAX);
if (r < 0)
return pam_syslog_errno(pamh, LOG_ERR, r, "Failed to write OSC sequence to TTY: %m");
/* Remember the OSC context id, so that we can close it cleanly later */
_cleanup_free_ sd_id128_t *osc_id_copy = newdup(sd_id128_t, &osc_id, 1);
if (!osc_id_copy)
return pam_log_oom(pamh);
r = sym_pam_set_data(pamh, "systemd.osc-context-id", osc_id_copy, pam_cleanup_free);
if (r != PAM_SUCCESS)
return pam_syslog_pam_error(pamh, LOG_ERR, r,
"Failed to set PAM OSC sequence ID data: @PAMERR@");
TAKE_PTR(osc_id_copy);
if (tty_opath_fd >= 0) {
r = sym_pam_set_data(pamh, "systemd.osc-context-fd", FD_TO_PTR(tty_opath_fd), pam_cleanup_close);
if (r != PAM_SUCCESS)
return pam_syslog_pam_error(pamh, LOG_ERR, r,
"Failed to set PAM OSC sequence fd data: @PAMERR@");
TAKE_FD(tty_opath_fd);
}
return PAM_SUCCESS;
}
static int close_osc_context(pam_handle_t *pamh, bool debug) {
int r;
assert(pamh);
const void *p;
int tty_opath_fd = -EBADF;
r = sym_pam_get_data(pamh, "systemd.osc-context-fd", &p);
if (r == PAM_SUCCESS)
tty_opath_fd = PTR_TO_FD(p);
else if (r != PAM_NO_MODULE_DATA)
return pam_syslog_pam_error(pamh, LOG_ERR, r, "Failed to get PAM OSC context fd: @PAMERR@");
if (tty_opath_fd < 0)
return PAM_SUCCESS;
const sd_id128_t *osc_id = NULL;
r = sym_pam_get_data(pamh, "systemd.osc-context-id", (const void**) &osc_id);
if (!IN_SET(r, PAM_SUCCESS, PAM_NO_MODULE_DATA))
return pam_syslog_pam_error(pamh, LOG_ERR, r, "Failed to get PAM OSC context id data: @PAMERR@");
if (!osc_id)
return PAM_SUCCESS;
/* Now open the original TTY again, so that we can write on it */
_cleanup_close_ int fd = fd_reopen(tty_opath_fd, O_WRONLY|O_CLOEXEC|O_NONBLOCK|O_NOCTTY);
if (fd < 0) {
pam_debug_syslog_errno(pamh, debug, fd, "Failed to reopen TTY, ignoring: %m");
return PAM_SUCCESS;
}
/* /bin/login calls us with fds 0, 1, 2 closed, which is just weird. Let's step outside of that
* range, just in case sym_pam_syslog() or so logs to stderr */
fd = fd_move_above_stdio(fd);
/* Safety check, let's verify this is a valid TTY we just opened */
if (!isatty_safe(fd))
return PAM_SUCCESS;
_cleanup_free_ char *osc = NULL;
r = osc_context_close(*osc_id, &osc);
if (r < 0)
return pam_syslog_errno(pamh, LOG_ERR, r, "Failed to prepare OSC sequence: %m");
/* When we are closing things, the TTY might not take our writes anymore. Accept that gracefully. */
r = loop_write(fd, osc, SIZE_MAX);
if (r < 0)
pam_debug_syslog_errno(pamh, debug, r, "Failed to write OSC sequence to TTY, ignoring: %m");
return PAM_SUCCESS;
}
static int acquire_inhibit_lock(
pam_handle_t *pamh,
const char *inhibit_what,
const char *inhibit_why,
bool debug) {
_cleanup_(pam_bus_data_disconnectp) PamBusData *d = NULL;
_cleanup_(sd_bus_flush_close_unrefp) sd_bus *bus = NULL;
_cleanup_(sd_bus_error_free) sd_bus_error error = SD_BUS_ERROR_NULL;
_cleanup_(sd_bus_message_unrefp) sd_bus_message *reply = NULL;
const char *service = NULL;
int r;
assert(pamh);
assert(inhibit_what);
r = pam_acquire_bus_connection(pamh, "pam-systemd", debug, &bus, &d);
if (r != PAM_SUCCESS)
return r;
(void) sym_pam_get_item(pamh, PAM_SERVICE, (const void **) &service);
r = bus_call_method(bus, bus_login_mgr, "Inhibit", &error, &reply, "ssss",
inhibit_what,
service ?: "pam_systemd",
inhibit_why ?: "Active PAM session",
"block");
if (r < 0) {
sym_pam_syslog(pamh, LOG_WARNING, "Failed to acquire inhibit lock: %s", bus_error_message(&error, r));
return PAM_SESSION_ERR;
}
int raw_fd;
r = sd_bus_message_read_basic(reply, SD_BUS_TYPE_UNIX_FD, &raw_fd);
if (r < 0)
return pam_bus_log_parse_error(pamh, r);
_cleanup_close_ int fd = fcntl(raw_fd, F_DUPFD_CLOEXEC, 3);
if (fd < 0)
return pam_syslog_errno(pamh, LOG_ERR, errno, "Failed to dup inhibit lock fd: %m");
r = sym_pam_set_data(pamh, "systemd.inhibit-fd", FD_TO_PTR(fd), pam_cleanup_close);
if (r != PAM_SUCCESS)
return pam_syslog_pam_error(pamh, LOG_ERR, r,
"Failed to store inhibit lock fd: @PAMERR@");
TAKE_FD(fd);
pam_debug_syslog(pamh, debug, "Acquired inhibit lock for '%s'.", inhibit_what);
return PAM_SUCCESS;
}
_public_ PAM_EXTERN int pam_sm_open_session(
pam_handle_t *pamh,
int flags,
int argc, const char **argv) {
int r;
assert(pamh);
LIBPAM_NOTE(required);
r = dlopen_libpam(LOG_DEBUG);
if (r < 0)
return PAM_SERVICE_ERR;
pam_log_setup();
uint64_t default_capability_bounding_set = CAP_MASK_UNSET, default_capability_ambient_set = CAP_MASK_UNSET;
const char *class_pam = NULL, *type_pam = NULL, *desktop_pam = NULL, *area_pam = NULL, *inhibit_what = NULL, *inhibit_why = NULL;
bool debug = false;
if (parse_argv(pamh,
argc, argv,
&class_pam,
&type_pam,
&desktop_pam,
&area_pam,
&inhibit_what,
&inhibit_why,
&debug,
&default_capability_bounding_set,
&default_capability_ambient_set) < 0)
return PAM_SESSION_ERR;
pam_debug_syslog(pamh, debug, "pam-systemd: initializing...");
_cleanup_(user_record_unrefp) UserRecord *ur = NULL;
r = acquire_user_record(pamh, &ur);
if (r != PAM_SUCCESS)
return r;
_cleanup_(session_context_done) SessionContext c = {};
r = pam_get_item_many(
pamh,
PAM_SERVICE, &c.service,
PAM_XDISPLAY, &c.display,
PAM_TTY, &c.tty,
PAM_RUSER, &c.remote_user,
PAM_RHOST, &c.remote_host);
if (r != PAM_SUCCESS)
return pam_syslog_pam_error(pamh, LOG_ERR, r, "Failed to get PAM items: @PAMERR@");
c.seat = getenv_harder(pamh, "XDG_SEAT", NULL);
c.vtnr = getenv_harder_uint32(pamh, "XDG_VTNR", 0);
c.type = getenv_harder(pamh, "XDG_SESSION_TYPE", type_pam);
c.class = getenv_harder(pamh, "XDG_SESSION_CLASS", class_pam);
c.desktop = getenv_harder(pamh, "XDG_SESSION_DESKTOP", desktop_pam);
c.area = getenv_harder(pamh, "XDG_AREA", area_pam);
c.incomplete = getenv_harder_bool(pamh, "XDG_SESSION_INCOMPLETE", false);
inhibit_what = getenv_harder(pamh, "XDG_SESSION_INHIBIT", inhibit_what);
inhibit_why = getenv_harder(pamh, "XDG_SESSION_INHIBIT_WHY", inhibit_why);
const char *extra_device_access = getenv_harder(pamh, "XDG_SESSION_EXTRA_DEVICE_ACCESS", NULL);
if (extra_device_access) {
c.extra_device_access = strv_split(extra_device_access, ":");
if (!c.extra_device_access)
return pam_log_oom(pamh);
}
r = pam_get_data_many(
pamh,
"systemd.memory_max", &c.memory_max,
"systemd.tasks_max", &c.tasks_max,
"systemd.cpu_weight", &c.cpu_weight,
"systemd.io_weight", &c.io_weight,
"systemd.runtime_max_sec", &c.runtime_max_sec);
if (r != PAM_SUCCESS)
return pam_syslog_pam_error(pamh, LOG_ERR, r, "Failed to get PAM data: @PAMERR@");
session_context_mangle(pamh, &c, ur, debug);
_cleanup_free_ char *seat_buffer = NULL, *type_buffer = NULL, *runtime_dir = NULL;
r = register_session(pamh, &c, ur, debug, &seat_buffer, &type_buffer, &runtime_dir);
if (r != PAM_SUCCESS)
return r;
if (inhibit_what)
/* Failure to acquire the inhibit lock is not fatal, session setup should proceed
* regardless. */
(void) acquire_inhibit_lock(pamh, inhibit_what, inhibit_why, debug);
r = import_shell_credentials(pamh, debug);
if (r != PAM_SUCCESS)
return r;
r = setup_environment(pamh, ur, runtime_dir, c.area, debug);
if (r != PAM_SUCCESS)
return r;
if (default_capability_ambient_set == CAP_MASK_UNSET)
default_capability_ambient_set = pick_default_capability_ambient_set(ur, c.service, c.seat);
r = apply_user_record_settings(pamh, ur, debug, default_capability_bounding_set, default_capability_ambient_set);
if (r != PAM_SUCCESS)
return r;
return open_osc_context(pamh, c.type, ur, debug);
}
_public_ PAM_EXTERN int pam_sm_close_session(
pam_handle_t *pamh,
int flags,
int argc, const char **argv) {
bool debug = false;
const char *id;
int r;
assert(pamh);
r = dlopen_libpam(LOG_DEBUG);
if (r < 0)
return PAM_SERVICE_ERR;
pam_log_setup();
if (parse_argv(pamh,
argc, argv,
/* class= */ NULL,
/* type= */ NULL,
/* desktop= */ NULL,
/* area= */ NULL,
/* inhibit_what= */ NULL,
/* inhibit_why= */ NULL,
&debug,
/* default_capability_bounding_set= */ NULL,
/* default_capability_ambient_set= */ NULL) < 0)
return PAM_SESSION_ERR;
pam_debug_syslog(pamh, debug, "pam-systemd: shutting down...");
(void) close_osc_context(pamh, debug);
(void) sym_pam_set_data(pamh, "systemd.inhibit-fd", NULL, NULL);
id = sym_pam_getenv(pamh, "XDG_SESSION_ID");
if (id) {
_cleanup_(sd_varlink_unrefp) sd_varlink *vl = NULL;
bool done = false;
r = sd_varlink_connect_address(&vl, "/run/systemd/io.systemd.Login");
if (r < 0)
pam_debug_syslog_errno(pamh, debug, r, "Failed to connect to logind via Varlink, falling back to D-Bus: %m");
else {
_cleanup_(sd_json_variant_unrefp) sd_json_variant *vreply = NULL;
const char *error_id = NULL;
r = sd_varlink_callbo(
vl,
"io.systemd.Login.ReleaseSession",
/* ret_reply= */ NULL,
&error_id,
SD_JSON_BUILD_PAIR_STRING("Id", id));
if (r < 0)
return pam_syslog_errno(pamh, LOG_ERR, r,
"Failed to issue io.systemd.Login.ReleaseSession varlink call: %m");
if (error_id)
return pam_syslog_errno(pamh, LOG_ERR, sd_varlink_error_to_errno(error_id, vreply),
"Varlink call io.systemd.Login.ReleaseSession failed: %s", error_id);
done = true;
}
if (!done) {
_cleanup_(sd_bus_error_free) sd_bus_error error = SD_BUS_ERROR_NULL;
_cleanup_(pam_bus_data_disconnectp) PamBusData *d = NULL;
_cleanup_(sd_bus_flush_close_unrefp) sd_bus *bus = NULL;
/* Before we go and close the FIFO we need to tell logind that this is a clean session
* shutdown, so that it doesn't just go and slaughter us immediately after closing the fd */
r = pam_acquire_bus_connection(pamh, "pam-systemd", debug, &bus, &d);
if (r != PAM_SUCCESS)
return r;
r = bus_call_method(bus, bus_login_mgr, "ReleaseSession", &error, NULL, "s", id);
if (r < 0)
return pam_syslog_pam_error(pamh, LOG_ERR, PAM_SESSION_ERR,
"Failed to release session: %s", bus_error_message(&error, r));
}
}
return PAM_SUCCESS;
}